Datasheet

MPC5121E/MPC5123 Data Sheet, Rev. 5
Electrical and Thermal Characteristics
Freescale Semiconductor18
3 Electrical and Thermal Characteristics
3.1 DC Electrical Characteristics
3.1.1 Absolute Maximum Ratings
The tables in this section describe the MPC5121e/MPC5123 DC Electrical characteristics. Table 4 gives the absolute maximum
ratings.
Table 4. Absolute Maximum Ratings
1
1
Absolute maximum ratings are stress ratings only, and functional operation at the maximums is not guaranteed. Stresses
beyond those listed may affect device reliability or cause permanent damage.
Characteristic Symbol Min Max Unit SpecID
Supply voltage – e300 core and peripheral logic V
DD_CORE
–0.3 1.47 V D1.1
Supply voltage – I/O buffers V
DD_IO
, V
DD_MEM_IO
–0.3 3.6 V D1.2
Input reference voltage (DDR/DDR2) MVREF –0.3 3.6 V
Termination Voltage (DDR2) MVTT –0.3 3.6 V
Supply voltage – System APLL, System Oscillator SYS_PLL_AVDD –0.3 3.6 V D1.3
Supply voltage – e300 APLL CORE_PLL_AVDD –0.3 3.6 V D1.4
Supply voltage – RTC (Hibernation) VBAT_RTC –0.3 3.6 V D1.5
Supply voltage – FUSE Programming AVDD_FUSEWR –0.3 3.6 V D1.6
Supply voltage – SATA PHY analog SATA_VDDA_3P3 –0.3 3.6 V D1.8
Supply voltage – SATA PHY voltage regulator SATA_VDDA_VREG –0.3 2.6 V D1.9
Supply voltage – SATA PHY Tx/Rx SATA_VDDA_1P2 –0.3 1.47 V D1.10
Supply voltage – SATA PHY PLL SATA_PLL_VDDA1P2 –0.3 1.47 V D1.11
Supply voltage – USB PHY PLL and OSC USB_PLL_PWR3 –0.3 3.6 V D1.12
Supply voltage – USB PHY transceiver USB_VDDA –0.3 3.6 V D1.13
Supply voltage – USB PHY bandgap bias USB_VDDA_BIAS –0.3 3.6 V D1.14
Input voltage – USB PHY cable USB_VBUS –0.3 3.6 V D1.15
Input voltage (V
DD_IO
) Vin –0.3 V
DD_IO
+ 0.3
V D1.16
Input voltage ( V
DD_MEM_IO
) Vin –0.3 V
DD_MEM_IO
+ 0.3
V D1.17
Input voltage (VBAT_RTC) Vin –0.3 VBAT_RTC
+ 0.3
V D1.18
Input voltage overshoot Vinos — 1 V D1.19
Input voltage undershoot Vinus — 1 V D1.20
Storage temperature range Tstg  55 150
o
C D1.21