Datasheet

Electrical and Thermal Characteristics
MPC5121E/MPC5123 Data Sheet, Rev. 5
Freescale Semiconductor 19
3.1.2 Recommended Operating Conditions
Table 5 gives the recommended operating conditions.
3)
Table 5. Recommended Operating Conditions
Characteristic Symbol Min
1
1
These are recommended and tested operating conditions. Proper device operation outside these conditions is not guaranteed.
Typ Max
1
Unit SpecID
Supply voltage – e300 core and peripheral
logic
V
DD_CORE
1.33 1.4 1.47 V D2.1
State Retention voltage – e300 core and
peripheral logic
2
2
The State Retention voltage can be applied to V
DD_CORE
after the device is placed in Deep-Sleep mode.
1.08
— —
V D2.2
Supply voltage – standard I / O buffers V
DD_IO
3.0 3.3 3.6 V D2.3
Supply voltage – memory I / O buffers (DDR) V
DD_MEM_IO_DDR
2.3 2.5 2.7 V D2.4
Supply voltage – memory I/O buffers (DDR2,
LPDDR)
V
DD_MEM_IO_DDR2
V
DD_MEM_IO_LPDDR
1.7 1.8 1.9 V D2.5
Input Reference Voltage (DDR/DDR2) MVREF 0.49 ×
V
DD_MEM_IO
0.50 ×
V
DD_MEM_IO
0.51 ×
V
DD_MEM_IO
V D2.6
Termination Voltage (DDR2) MVTT MVREF
– 0.04
MVREF MVREF
+ 0.04
V D2.7
Supply voltage – System APLL, System
Oscillator
SYS_PLL_AVDD 3.0 3.3 3.6 V D2.8
Supply voltage – e300 APLL CORE_PLL_AVDD 3.0 3.3 3.6 V D2.9
Supply voltage – RTC (Hibernation)
3
3
VBAT_RTC should not be supplied by a battery of voltage less than 3.0 V.
VBAT_RTC 3.0 3.3 3.6 V D2.10
Supply voltage – FUSE Programming AVDD_FUSEWR 3.3 3.6 V D2.11
Supply voltage – SATA PHY analog and OSC SATA_VDDA_3P3 3.0 3.3 3.6 V D2.13
Supply voltage – SATA PHY voltage regulator SATA_VDDA_VREG 1.7 2.6 V D2.14
Supply voltage – SATA PHY Tx/Rx SATA_VDDA_1P2 1.14 1.2 1.47 V D2.15
Supply voltage – SATA PHY PLL SATA_PLL_VDDA1P2 1.33 1.4 1.47 V D2.16
Supply voltage – USB PHY PLL and OSC USB_PLL_PWR3 3.0 3.3 3.6 V D2.17
Supply voltage – USB PHY transceiver USB_VDDA 3.0 3.3 3.6 V D2.18
Supply voltage – USB PHY bandgap bias USB_VDDA_BIAS 3.0 3.3 3.6 V D2.19
Input voltage – USB PHY cable USB_VBUS 1.4 — 3.6 V D2.20
Input voltage – standard I/O buffers Vin 0 — V
DD_IO
V D2.21
Input voltage – memory I/O buffers (DDR) Vin
DDR
0
—
V
DD_MEM_IO
_DDR
V D2.22
Input voltage – memory I/O buffers (DDR2) Vin
DDR2
0
—
V
DD_MEM_I
O_DDR2
V D2.23
Input voltage – memory I/O buffers (LPDDR) Vin
LPDDR
0
—
V
DD_MEM_I
O_LPDR
V D2.24
Ambient operating temperature range TA –40 — +85
o
C D2.25
Junction operating temperature range TJ –40 — +125
o
C D2.26