Datasheet

MPC8241 Integrated Processor Hardware Specifications, Rev. 10
Freescale Semiconductor 5
General Parameters
—I
2
C controller with full master/slave support that accepts broadcast messages
— Programmable interrupt controller (PIC)
– Five hardware interrupts (IRQs) or 16 serial interrupts
– Four programmable timers with cascade
— Two (dual) universal asynchronous receiver/transmitters (UARTs)
— Integrated PCI bus and SDRAM clock generation
— Programmable PCI bus and memory interface output drivers
• System level performance monitor facility
• Debug features
— Memory attribute and PCI attribute signals
— Debug address signals
—MIV
signal—marks valid address and data bus cycles on the memory bus
— Programmable input and output signals with watchpoint capability
— Error injection/capture on data path
— IEEE Std. 1149.1 (JTAG)/test interface
3 General Parameters
The following list summarizes the general parameters of the MPC8241:
Technology 0.25 µm CMOS, five-layer metal
Die size 49.2 mm
2
Transistor count 4.5 million
Logic design Fully static
Packages Surface-mount 357 (thick substrate and thick mold cap)
plastic ball grid array (PBGA)
Core power supply 1.8 V ± 100 mV DC (nominal; see Table 2 for details
and recommended operating conditions)
I/O power supply 3.0 to 3.6 V DC