Datasheet

• High degree of software compatibility
with previous generation PowerQUICC
processor-based designs for backward
compatibility and easier software migration
QUICC Engine Technology Features
• Single 32-bit RISC controller for flexible
support of communications peripherals
• Serial DMA controller for receive and
transmit on all serial channels
• Five UCCs supporting the following
interfaces (not all simultaneously)
- 10/100 Mbps Ethernet/IEEE Std. 802.3
through MII and RMII interfaces
- IEEE 1588 version-2 support (only on
MPC8306)
- HDLC/transparent (bit rate up to QUICC
Engine operating frequency divided by
eight)
- HDLC bus (bit rate up to 10 Mbps)
- PROFIBUS protocol support
- Asynchronous HDLC (bit rate up to
2 Mbps)
- Two TDM interfaces supporting up to 128
channels each running at up to 64 Kbps
The UCCs are similar to the PowerQUICC II
peripherals in that the serial communications
controller (SCC) supports the UART and HDLC
bus and fast serial communications controller
(FCC) supports fast Ethernet and HDLC.
Enablement
The MPC8306-KIT is a cost-optimized
reference development kit for the MPC8306
processor. The kit consists of a carrier card
and processor-specific system on module
(SOM) card. The SOM interfaces with
peripherals through the carrier card. This same
carrier card can be used for the MPC8309
processor SOMs.The MPC830x-KIT board
support package (BSP) can be customized
per project and combined with off-the-shelf
software for product development. The BSP
components provide the tools, device drivers
and additional features needed for embedded
Linux
®
OS projects.
MPC8306-KIT Contents
• MPC8306 SOM board
• MPC830x carrier card
• BSP
• UART cable
• Ethernet cable
• Power adaptor (12V–5A) and cable
MPC830x PowerQUICC II Pro Processor Portfolio
MPC8308 MPC8309 MPC8306 MPC8306S
Core e300 e300 e300 e300
I-Cache/D-Cache 16K/16K 16K/16K 16K/16K 16K/16K
Floating Point Unit Yes Yes Yes Yes
Core Frequency 266/333/400 266/333/400/417 133/200/266 133/200/266
QUICC Engine Subsystem No 32-bit RISC 32-bit RISC 32-bit RISC
Memory Controller
16/32-bit DDR2 with ECC 16/32-bit DDR2 with ECC
16-bit DDR2 16-bit DDR2
Local Bus 8/16-bit up to 66 MHz 8/16-bit up to 66 MHz 8/16-bit up to 66 MHz 8/16-bit up to 66 MHz
PCI Interface No (1 x PCI Express) 32-bit up to 66 MHz No No
Ethernet
2 x 10/100/1000
MII/RGMII
3 x 10/100 MII/RMII or 2 x
10/100 with IEEE 1588 V2
3 x 10/100 MII/RMII or 2 x
10/100 with IEEE 1588 V2
3 x 10/100 MII/RMII
USB 2.0 Yes Yes Yes Yes
UART Yes (2 x) Yes (4 x) Yes (4 x) Yes (4 x)
I
2
C Controller Dual Dual Dual Dual
SPI Yes Yes Yes Yes
Interrupt Controller IPIC IPIC IPIC IPIC
IEEE
®
1588 Support Yes Yes Yes No
eSDHC Yes Yes Yes No
FlexCAN No
Yes Yes No
Package 473-pin MAPBGA 489-pin MAPBGA 369-pin MAPBGA 369-pin MAPBGA
Learn More:
For current information about Freescale
products and documentation, please visit
freescale.com/PowerQUICC.
Freescale, the Freescale logo and PowerQUICC are trademarks of Freescale Semiconductor, Inc. Reg. U.S. Pat. &
Tm.Off. QUICC Engine is a trademark of Freescale Semiconductor, Inc. All other product or service names are the
property of their respective owners. The Power Architecture and Power.org word marks and the Power and Power.
org logos and related marks are trademarks and service marks licensed by Power.org.
© 2010–2011 Freescale Semiconductor, Inc.
Document Number: MPC8306FS
REV 3