Datasheet

ManualsBrandsNXP SEMICONDUCTORS ManualsLinear ICsLinear IC - Comparator Multi-purpose Rail-to-rail XSON 6 (1x1)

1. General description

The NCX2200 provides a single low voltage low power comparator.

The NCX2200 has a very low supply current of 6 A and is guaranteed to operate at a low

voltage of 1.3 V and is fully operational up to 5.5 V which makes this device convenient for

use in both 3.0 V and 5.0 V systems.

2. Features and benefits

 Wide supply voltage range from 1.3 V to 5.5 V (functional operating range)

 Rail-to-rail input/output performance

 Very low supply current of 6 A (typical)

 Very low-power consumption

 No phase inversion with overdriven input signals

 Internal hysteresis

 Propagation delay of 0.8 s (typical)

 ESD protection:

 HBM JESD22-A114F Class 3A. Exceeds 2000 V

 CDM JESD22-C101E exceeds 1000 V

 Multiple package options

 Specified from 40 Cto+85 C

3. Applications

 Cellular telephones

 Alarm and security systems

 Personal Digital assistants

NCX2200

Low voltage comparator

Rev. 6 — 9 July 2014 Product data sheet

Summary of content (18 pages)

PAGE 1
NCX2200 Low voltage comparator Rev. 6 — 9 July 2014 Product data sheet 1. General description The NCX2200 provides a single low voltage low power comparator. The NCX2200 has a very low supply current of 6 A and is guaranteed to operate at a low voltage of 1.3 V and is fully operational up to 5.5 V which makes this device convenient for use in both 3.0 V and 5.0 V systems. 2. Features and benefits         Wide supply voltage range from 1.3 V to 5.
PAGE 2
NCX2200 NXP Semiconductors Low voltage comparator 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version NCX2200GW 40 C to +85 C TSSOP5 plastic thin shrink small outline package; 5 leads; body width 1.25 mm SOT353-1 NCX2200GM 40 C to +85 C XSON6 plastic extremely thin small outline package; no leads; 6 terminals; body 1  1.45  0.
PAGE 3
NCX2200 NXP Semiconductors Low voltage comparator 7. Pinning information 7.1 Pinning NCX2200 NCX2200 OUT VEE IN+ 1 5 OUT 1 6 VCC VEE 2 5 n.c. IN+ 3 4 IN- VCC 2 3 4 IN- VEE 1 6 OUT VCC 2 5 VCC IN- 3 4 IN+ aaa-000047 001aan853 Transparent top view Transparent top view 001aan852 Fig 2. NCX2200 Pin configuration SOT353-1 Fig 3. Pin configuration SOT886 Fig 4. Pin configuration SOT891 and SOT1202 7.2 Pin description Table 3.
PAGE 4
NCX2200 NXP Semiconductors Low voltage comparator 9. Recommended operating conditions Table 5. Recommended operating conditions Symbol Parameter Conditions VCC supply voltage VCC to VEE full spec operating range functional operating range Min Typ Max Unit 1.6 - 5.5 V 1.3 - 5.5 V VI input voltage VEE - VCC V Tamb ambient temperature 40 - +85 C 10. Static characteristics Table 6. Static characteristics At recommended operating conditions. VCC = 1.6 V to 5.
PAGE 5
NCX2200 NXP Semiconductors Low voltage comparator 11. Dynamic characteristics Table 7. Dynamic characteristics Voltages are referenced to VEE (VEE = 0 V);VCC = 1.6 V to 5.5 V; VCM = 0.5VCC unless otherwise specified. Symbol Parameter 25 C Conditions Unit Min Typ Max [1] tpd propagation delay - 0.8 - s tTHL HIGH to LOW output transition time VCC = 5.5 V; CL = 50 pF [2] - 10 - ns tTLH LOW to HIGH output transition time VCC = 5.
PAGE 6
NCX2200 NXP Semiconductors Low voltage comparator 001aan856 8 001aan857 103 VCC - VOH (mV) lcc (μA) 102 6 4 10 (1) (2) (3) 1 2 10-1 10-2 0 0 2 4 6 10-1 1 VCC (V) 10 IO (mA) (1) Tamb = 40 C. Tamb = 25 C. (2) Tamb = 25 C. VCC = 5.0 V. (3) Tamb = 85 C. Fig 7. Supply current versus supply voltage Fig 8. 001aan858 103 HIGH-level output voltage versus output current 001aan859 4.90 VOH (V) 4.88 VOL (mV) 102 4.86 10 4.84 1 4.82 10-1 10-2 10-1 1 4.
PAGE 7
NCX2200 NXP Semiconductors Low voltage comparator 001aan860 220 VOL (mV) 180 001aan861 1400 tpd (ns) 1000 (1) 600 (2) 140 100 60 20 -40 0 40 80 200 -50 120 Temp (°C) 0 50 100 Temp (°C) VCC = 5.0 V; input overdrive = 50 mV. IO = 4.0 mA. VCC = 5.0 V. (1) tPLH. (2) tPHL. Fig 11. LOW-level output voltage versus temperature Fig 12. Propagation delay versus temperature 001aan862 700 tpd (ns) 500 (1) 300 (2) 100 1 2 3 4 5 6 VCC (V) Tamb = 25 C; input overdrive = 100 mV.
PAGE 8
NCX2200 NXP Semiconductors Low voltage comparator 13. Application information 13.1 Operating description The NCX2200 is a single low voltage low power comparator. This device is designed for rail-to-rail input and output performance. This device consumes only 6 A of supply current while achieving a typical propagation delay of 0.8 s at a 20 mV input overdrive. This comparator is guaranteed to operate at a low voltage of 1.3 V up to 5.5 V. The common-mode input voltage range extends 0.
PAGE 9
NCX2200 NXP Semiconductors Low voltage comparator 13.3 Schmitt trigger oscillator Figure 15 shows the NCX2200 configured as a Schmitt trigger oscillator. RX +VCC IN- NCX2200 CX OUT VO IN+ R -VCC R 001aan864 The oscillation frequency can be calculated as follows: 1 f = --1- = ----------------------------T 2.2  R X  C X Fig 15. Schmitt trigger oscillator 13.4 Zero-crossing detector Figure 16 shows the NCX2200 configured as a zero-crossing detector.
PAGE 10
NCX2200 NXP Semiconductors Low voltage comparator 13.5 One-shot multivibrator Figure 17 shows the NCX2200 configured as a one-shot multivibrator. VCC R1 1 MΩ 100 pF VCC INt0 NCX2200 R2 1 MΩ OUT VO IN+ 0 t0 t1 C1 R3 001aan866 The resistor divider R1 and R2 can be used to set the magnitude of the input pulse. The pulse width is set by adjusting C1 and R3. Fig 17. One-shot multivibrator 13.6 Logic level translator Figure 18 shows the NCX2200 configured as a logic level translator.
PAGE 11
NCX2200 NXP Semiconductors Low voltage comparator 14.
PAGE 12
NCX2200 NXP Semiconductors Low voltage comparator 627 ;621 SODVWLF H[WUHPHO\ WKLQ VPDOO RXWOLQH SDFNDJH QR OHDGV WHUPLQDOV ERG\ [ [ PP E [ / / H H H [ $ $ ' ( WHUPLQDO LQGH[ DUHD PP VFDOH 'LPHQVLRQV PP DUH WKH RULJLQDO GLPHQVLRQV 8QLW PP PD[ QRP PLQ $ $ E ' ( H H / / 1RWHV ,QFOXGLQJ SODWLQJ WKLFNQHVV &DQ EH YLVLEOH LQ
PAGE 13
NCX2200 NXP Semiconductors Low voltage comparator ;621 SODVWLF H[WUHPHO\ WKLQ VPDOO RXWOLQH SDFNDJH QR OHDGV WHUPLQDOV ERG\ [ [ PP 627 E î / / H H H î $ $ ' ( WHUPLQDO LQGH[ DUHD PP VFDOH ',0(16,216 PP DUH WKH RULJLQDO GLPHQVLRQV 81,7 $ PD[ $ PD[ E ' ( H H / / PP 1RWH &DQ EH YLVLEOH LQ VRPH PDQXIDFWXULQJ SURFHVVHV 5()(5(1&(6 287/,1
PAGE 14
NCX2200 NXP Semiconductors Low voltage comparator ;621 H[WUHPHO\ WKLQ VPDOO RXWOLQH SDFNDJH QR OHDGV WHUPLQDOV ERG\ [ [ PP 627 E î / / H H H î $ $ ' ( WHUPLQDO LQGH[ DUHD VFDOH 'LPHQVLRQV 8QLW PP PP $ $ E ' ( H H / / PD[ QRP PLQ 1RWH ,QFOXGLQJ SODWLQJ WKLFNQHVV 9LVLEOH GHSHQGLQJ XSRQ XVHG PDQXIDFWXUL
PAGE 15
NCX2200 NXP Semiconductors Low voltage comparator 15. Abbreviations Table 8. Abbreviations Acronym Description CDM Charged Device Model ESD ElectroStatic Discharge HBM Human Body Model 16. Revision history Table 9. Revision history Document ID Release date Data sheet status Change notice Supersedes NCX2200 v6 20140709 Product data sheet - NCX2200 v.5 - NCX2200 v.4 Modifications: NCX2200 v5 Modifications: NCX2200 v4 Modifications: NCX2200 v.3 • Package SOT1202 added.
PAGE 16
NCX2200 NXP Semiconductors Low voltage comparator 17. Legal information 17.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
PAGE 17
NCX2200 NXP Semiconductors Low voltage comparator Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use.
PAGE 18
NCX2200 NXP Semiconductors Low voltage comparator 19. Contents 1 2 3 4 5 6 7 7.1 7.2 8 9 10 11 12 13 13.1 13.2 13.3 13.4 13.5 13.6 14 15 16 17 17.1 17.2 17.3 17.4 18 19 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .