PCA8547 4 x 44 automotive LCD driver with integrated charge pump Rev. 1 — 21 January 2014 Product data sheet 1. General description The PCA8547 is a fully featured Liquid Crystal Display (LCD)1 driver, specifically designed for high-contrast Vertical Alignment (VA) LCD with multiplex rates up to 1:4. It generates the drive signals for any static or multiplexed LCD containing up to four backplanes, 44 segments, and up to 176 elements.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump Manufactured in silicon gate CMOS process Two RAM banks provided 3. Applications Instrument cluster Car radio Climate control units 4. Ordering information Table 1. Ordering information Type number Package Name Description Version PCA8547AHT TQFP64 plastic thin quad flat package; 64 leads; body 10 10 1.0 mm SOT357-1 PCA8547BHT TQFP64 plastic thin quad flat package; 64 leads; body 10 10 1.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 6. Block diagram 9/&' 6 WR 6 %3 WR %3 9'' %$&.3/$1( 2873876 ',63/$< 6(*0(17 2873876 /&' 92/7$*( 6(/(&725 &+$5*( 3803 92/7$*( 08/7,3/,(5 ',63/$< 5(*,67(5 ',63/$< &21752/ 287387 %$1. 6(/(&7 /&' %,$6 *(1(5$725 966 7(03(5$785( 6(1625 &/. ',63/$< 5$0 &/2&.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 9/&' 6 WR 6 %3 WR %3 9'' %$&.3/$1( 2873876 ',63/$< 6(*0(17 2873876 /&' 92/7$*( 6(/(&725 &+$5*( 3803 92/7$*( 08/7,3/,(5 ',63/$< 5(*,67(5 ',63/$< &21752/ 287387 %$1. 6(/(&7 /&' %,$6 *(1(5$725 966 ',63/$< 5$0 7(03(5$785( 6(1625 &/. &/2&. 6(/(&7 $1' 7,0,1* 26&,//$725 32:(5 21 5(6(7 5(6(7 6&/ &200$1' '(&2'(5 :5,7( '$7$ &21752/ '$7$ 32,17(5 $872 ,1&5(0(17 63, %86 &21752//(5 6',2 &( Fig 2.
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx NXP Semiconductors PCA8547 Q F Q F Q F Q F 6 6 6 6 6
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 7.2 Pin description Table 4. Pin description of PCA8547A and PCA8547B Input or input/output pins must always be at a defined level (VSS or VDD) unless otherwise specified.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8. Functional description The PCA8547 is a versatile peripheral device designed to interface any microcontroller to a wide variety of LCDs. It can directly drive any static or multiplexed LCD containing up to 176 elements. 8.1 Commands of PCA8547 The commands to control the PCA8547 are defined in Table 5.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.1.1 Command: Initialize This command generates a chip-wide reset. It consists of two bytes which have to be sent both to the device. Table 6. Initialize - initialize command bit description For further information, see Section 8.2 on page 16. Bit Symbol Value Description 00111010 fixed value 00000100 fixed value Initialize-MSB 7 to 0 - Initialize-LSB 7 to 0 - 8.1.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.1.3.2 Internal oscillator When the internal oscillator is used, it is possible to make the clock signal available on pin CLK by using the Oscillator-ctrl command (see Table 8). If this is not intended, the pin CLK should be left open. At power-on the signal at pin CLK is disabled and pin CLK is in 3-state. If the internal charge pump is enabled, then the internal oscillator starts and is used to run the charge pump.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.1.5 Command: Temp-msr-ctrl The Temp-msr-ctrl command enables or disables the temperature measurement block and the temperature compensation of VLCD. Table 10. Temp-msr-ctrl - temperature measurement control command bit description For further information, see Section 8.4.4 on page 28.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.1.7 Command: Set-VPR With these two instructions, it is possible to set the target VLCD voltage for the internal charge pump. Table 12. Set-VPR - set VPR command bit description For further information, see Section 8.4.2 on page 25.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.1.10 Command: Set-bias-mode The Set-bias-mode command allows setting the bias level. Table 15. Set-bias-mode - set bias mode command bit description For further information, see Section 8.4.5 on page 31. Bit Symbol Binary value Description 7 to 2 - 110001 fixed value 1 to 0 B[1:0] LCD bias configuration[1] 00[2] 01 1⁄ 4 bias 11 1⁄ 3 bias 10 1⁄ 2 bias [1] Not applicable for static drive mode.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump Table 18. F[4:0] Nominal frame frequency ffr (Hz)[1] Resultant output clock frequency, fclk(o) (Hz) Duty cycle (%)[2] 00111 129.7 6226 13 : 87 01000 141.2 6778 5 : 95 01001 150 7200 50 : 50 01010 160 7680 47 : 53 01011 171.4 8227 43 : 57 01100 177.8 8534 41 : 59 01101 192 9216 36 : 64 01110[3] 200 9600 33 : 67 01111 208.7 10018 30 : 70 10000 218.2 10474 27 : 73 10001 228.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump Table 19. Bank-select - bank select command bit description For further information, see Section 8.9 on page 43. Bit Symbol Binary value 7 to 2 - 000010 1 IBS 0 [1] Description fixed value selects RAM bank to write to 0[1] Bank 0 1 Bank 1 OBS selects RAM bank to read from to the LCD 0[1] Bank 0 1 Bank 1 Default value. 8.1.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump Table 22. Invmode_ctrl - drive scheme inversion command bit description For further information, see Section 8.4.6 on page 34. Bit Symbol Binary value Description 7 to 2 - 110101 fixed value 1 LF 0 [1] set inversion mode - 0[1] driving scheme A: line inversion mode 1 driving scheme B: frame inversion mode 0 fixed value Default value.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.2 Start-up and shut-down 8.2.1 Reset and Power-On Reset (POR) After power-on the PCA8547 has to be initialized by sending the two bytes of the initialize command (see Section 8.1.1 and Table 6). After a reset and the initialization the starting conditions of the PCA8547 are as follows: 1. All backplane and segment outputs are set to VSS. 2. Selected drive mode is: 1:4 with 1⁄4 bias. 3.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump Remark: Do not transfer data on the I2C-bus or SPI-bus for at least 1 ms after a power-on reset to allow the reset action to complete. The first command sent to the device after the power-on or reset event must be the Initialize command (see Section 8.1.1).
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.2.3 Recommended start-up sequences This chapter describes how to proceed with the initialization of the chip in different application modes.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 67$57 ,QLWLDWH DQ 273 UHIUHVK 3RZHU RQ 9'' 9'' DQG 9/&' DW WKH VDPH WLPH :ULWH 5$0 FRQWHQW WR EH GLVSOD\HG DQG HQDEOH WKH GLVSOD\ :DLW PLQLPXP PV 6723 ,QLWLDOL]H FRPPDQG DDD Fig 6. Recommended start-up sequence when using an external supplied VLCD and the internal clock signal 67$57 3RZHU RQ 9'' DQG 9'' DW WKH VDPH WLPH $SSO\ H[WHUQDO FORFN VLJQDO WR SLQ &/.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 67$57 3RZHU RQ 9'' 9'' DQG 9/&' DW WKH VDPH WLPH $SSO\ H[WHUQDO FORFN VLJQDO WR SLQ &/. VHW 26& ELW ORJLF :DLW PLQLPXP PV :ULWH 5$0 FRQWHQW WR EH GLVSOD\HG DQG HQDEOH WKH GLVSOD\ ,QLWLDOL]H FRPPDQG 6723 ,QLWLDWH DQ 273 UHIUHVK Fig 8. DDD Recommended start-up sequence when using an external supplied VLCD and an external clock signal 8.2.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 67$57 'LVDEOH GLV SOD\ E\ VHWWLQJ ELW ( ORJLF 'LVDEOH WHP SHUDWXUH PHD VXUHPHQW E\ VHWWLQJ ELW 70( ORJLF 6723 DDD Fig 10. Recommended power-down sequence when using an external supplied VLCD and the internal clock signal 67$57 'LVDEOH GLV SOD\ E\ VHWWLQJ ELW ( ORJLF 6WRS JHQHUD WLRQ RI 9/&' E\ VHWWLQJ ELW &3( ORJLF 'LVDEOH WHP SHUDWXUH PHD VXUHPHQW E\ VHWWLQJ ELW 70( ORJLF %ULQJ SLQ &/.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 67$57 'LVDEOH GLV SOD\ E\ VHWWLQJ ELW ( ORJLF 'LVDEOH WHP SHUDWXUH PHD VXUHPHQW E\ VHWWLQJ ELW 70( ORJLF %ULQJ SLQ &/. WR VWDWH E\ VHWWLQJ ELW 26& DQG ELW &2( ORJLF ([WHUQDO FORFN PD\ EH VZLWFKHG RII 6723 DDD Fig 12.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.3 Possible display configurations The PCA8547 is a versatile peripheral device designed to interface between any microcontroller to a wide variety of LCD segment or dot matrix displays (see Figure 13). It can directly drive any static or multiplexed LCD containing up to four backplanes with 44 segments. The display configurations possible with the PCA8547 depend on the number of active backplane outputs required.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 9'' 9'' 5 WU &E 6'$ +267 0,&52 &21752//(5 9'' 9/&' VHJPHQW GULYHV 6&/ 5(6(7 9'' /&' 3$1(/ XS WR HOHPHQWV 3&$ $ EDFNSODQHV &/. $ 7 7 7 966 Q F 966 DDD VDD1 from 1.8 V to 5.5 V and VDD2 from 2.5 V to 5.5 V. Fig 14.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.4 LCD supply voltage 8.4.1 External VLCD supply VLCD can be directly supplied to the VLCD pin. In this case, the internal charge pump must not be enabled otherwise a high current may occur on pin VDD2 and pin VLCD. When VLCD is supplied externally, no internal temperature compensation occurs on this voltage even if bit TCE is set logic 1 (see Section 8.4.4.2).
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump Figure 17 illustrates how VLCD changes with the programmed value of VPR[7:0]. DDD 9 /&' 9 9 9'' 9 & & & &$ )& )' )( )) 935> @ (1) If VDD2 > 3.0 V then VPR[7:0] must be set so that VLCD VDD2. (2) Automatic limitation for VLCD > 9.0 V. Fig 17.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump DDD 9/&' 9 ,'' /&' P$ (1) VPR[7:0] = 42h. (2) VPR[7:0] = 85h. (3) VPR[7:0] = C6h. Tamb = 30 C; VDD1 = VDD2 = 3.3 V. Remark: For driving the charge pump safely the VLCD and IDD(LCD) values have to be kept below the flat part of the respective graph. Charge pump configuration: VLCD = 3 VDD2. Fig 18. Charge pump driving capability with VDD2 = 3.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump DDD 9/&' 9 ,'' /&' P$ (1) VPR[7:0] = 42h. (2) VPR[7:0] = 85h. (3) VPR[7:0] = C6h. Tamb = 30 C; VDD1 = VDD2 = 5 V. Remark: For driving the charge pump safely the VLCD and IDD(LCD) values have to be kept below the flat part of the respective graph. b. Charge pump configuration: VLCD = 3 VDD2 Fig 19. Charge pump driving capability with VDD2 = 5.0 V 8.4.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump stepping of the display due to the VLCD voltage is periodically changing between two different target voltages. For this reason, a filter has been implemented to ensure that LSB jitter does not affect the display performance. 7(03(5$785( 0($685(0(17 %/2&.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.4.4.2 Temperature adjustment of the VLCD Due to the temperature dependency of the liquid crystal viscosity the LCD controlling voltage VLCD might have to be adjusted at different temperatures to maintain optimal contrast. The temperature behavior of the liquid comes from the LCD manufacturer. The slope has to be set to compensate for the liquid behavior.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump The offset voltage is calculated according to Table 28. Table 28.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump A practical value for VLCD is determined by equating Voff(RMS) with a defined LCD threshold voltage (Vth), typically when the LCD exhibits approximately 10 % contrast. In the static drive mode, a suitable choice is VLCD > 3Vth.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump Vth(off) and Vth(on) are properties of the LCD liquid and can be provided by the module manufacturer. Vth(off) is sometimes just named Vth. Vth(on) is sometimes named saturation voltage Vsat. It is important to match the module properties to those of the driver in order to achieve optimum performance. 5HODWLYH 7UDQVPLVVLRQ 9WK RII 2)) 6(*0(17 9WK RQ *5(< 6(*0(17 9506 >9@ 21 6(*0(17 DDD Fig 23.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.4.6 LCD drive mode waveforms 8.4.6.1 Static drive mode The static LCD drive mode is used when a single backplane is provided in the LCD. 7IU /&' VHJPHQWV 9/&' %3 966 VWDWH RQ 9/&' VWDWH RII 6Q 966 9/&' 6Q 966 D :DYHIRUPV DW GULYHU 9/&' VWDWH 9 9/&' 9/&' VWDWH 9 9/&' E 5HVXOWDQW ZDYHIRUPV DW /&' VHJPHQW DDD Vstate1(t) = VSn(t) VBP0(t). Vstate2(t) = V(Sn + 1)(t) VBP0(t).
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.4.6.2 1:2 multiplex drive mode When two backplanes are provided in the LCD, the 1:2 multiplex mode applies. The PCA8547 allows the use of 1⁄2 bias or 1⁄3 bias in this mode as shown in Figure 25 and Figure 26.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 7IU 9/&' %3 %3 /&' VHJPHQWV 9/&' 9/&' 966 VWDWH 9/&' 9/&' VWDWH 9/&' 966 9/&' 6Q 9/&' 9/&' 966 9/&' 6Q 9/&' 9/&' 966 D :DYHIRUPV DW GULYHU 9/&' 9/&' VWDWH 9/&' 9 9/&' 9/&' 9/&' 9/&' 9/&' 9/&' VWDWH 9 9/&' 9/&' 9/&' E 5HVXOWDQW ZDYHIRUPV DW /&' VHJPHQW DDD Vstate1(t) = VSn(t) VBP0(t). Vstate2(t) = VSn(t) VBP1(t).
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.4.6.3 1:4 multiplex drive mode When four backplanes are provided in the LCD, the 1:4 multiplex drive mode applies, as shown in Figure 27.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.5 Backplane and segment outputs 8.5.1 Backplane outputs The LCD drive section includes four backplane outputs: BP0 to BP3. The backplane output signals are generated based on the selected LCD multiplex drive mode. Table 30 describes which outputs are active for each of the multiplex drive modes and what signal is generated. Table 30.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.6 Display controller The display controller executes the commands identified by the command decoder. It contains the status registers of the PCA8547 and co-ordinates their effects. The controller is also responsible for loading display data into the display RAM as required by the filling order. 8.7 Display register The display register holds the display data while the corresponding multiplex signals are generated. 8.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 'LVSOD\ 5$0 DGGUHVVHV FROXPQV VHJPHQW RXWSXWV 6 0XOWLSOH[ GULYH PRGH 'LVSOD\ 5$0 ELWV URZV EDFNSODQH RXWSXWV %3 6 6 6 6 6 6 6 6 6 6 6 6 6 6 URZ %3 URZ %3 URZ %3 URZ %3 URZ %3 URZ %3 URZ %3 URZ %3 EDQN EDQN 0XOWLSOH[ GULYH PRGH 6 6 6 6 6 6 6 6 6 6 6 6 6 6 URZ %3 URZ %3 URZ URZ URZ %3 URZ %3 URZ URZ EDQN EDQN 6
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump After each byte stored, the data pointer is automatically incremented in accordance with the chosen LCD multiplex drive mode configuration: • by eight (static drive mode) • by four (1:2 multiplex drive mode) • by two (1:4 multiplex drive mode) When the address counter reaches the end of the RAM row, it stops incrementing after the last byte is transmitted. Redundant bits of the last byte transmitted are discarded.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.8.3 RAM filling in 1:2 multiplex drive mode In the 1:2 multiplex drive mode the eight transmitted data bits are placed in four successive display RAM columns (see Figure 31). In order to fill the whole two RAM rows 11 bytes need to be sent to the PCA8547.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.9 Bank selection The PCA8547 includes a RAM bank switching feature. A bank can be thought of as a collection of RAM rows. The RAM bank switching gives the provision for preparing display information in an alternative bank and to be able to switch to it once it is complete. There are two banks; bank 0 and bank 1. Figure 28 on page 40 shows the location of these banks relative to the RAM map.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 8.9.2 Output bank selection The OBS bit of the Bank-select command (see Table 19 on page 14) controls from which bank display data is taken, The output bank selection works independently of input bank selection. PCA8547 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 21 January 2014 © NXP B.V. 2014. All rights reserved.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 9. Bus interfaces 9.1 Control byte After initiating the communication over the bus and sending the slave address (I2C-bus, see Section 9.2) or subaddress (SPI-bus, see Section 9.3), a control byte follows. The purpose of this byte is to indicate both, the content for the following data bytes (RAM or command) and to indicate that more control bytes will follow.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 9.2 I2C-bus interface characteristics (PCA8547A) The I2C-bus is for bidirectional, two-line communication between different ICs or modules. The two lines are a Serial DAta line (SDA) and a Serial CLock line (SCL). Both lines must be connected to a positive supply via a pull-up resistor when connected to the output stages of a device. Data transfer may be initiated only when the bus is not busy. 9.2.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 0$67(5 75$160,77(5 5(&(,9(5 6/$9( 75$160,77(5 5(&(,9(5 6/$9( 5(&(,9(5 0$67(5 75$160,77(5 5(&(,9(5 0$67(5 75$160,77(5 6'$ 6&/ PJD Fig 38. System configuration 9.2.4 Acknowledge The number of data bytes transferred between the START and STOP conditions from transmitter to receiver is unlimited. Each byte of 8 bits is followed by an acknowledge cycle.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 9.2.6 Input filters To enhance noise immunity in electrically adverse environments, RC low-pass filters are provided on the SDA and SCL lines. 9.2.7 I2C-bus slave address The device selection depends on the I2C-bus slave address. Two different I2C-bus slave addresses can be used to address the PCA8547A (see Table 32). Table 32.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 5 : VODYH DGGUHVV FRQWURO E\WH 6 $ $ & 5 2 6 5$0 FRPPDQG E\WH / 6 3 % 0 $ 6 % (;$03/(6 D WUDQVPLW WZR E\WHV RI 5$0 GDWD 6 $ $ $ 5$0 '$7$ $ $ &200$1' $ $ &200$1' $ 3 &200$1' $ $ 5$0 '$7$ $ 5$0 '$7$ $ 3 E WUDQVPLW WZR FRPPDQG E\WHV 6 $ $ F WUDQVPLW RQH FRPPDQG E\WH DQG WZR 5$0 GDWH E\WHV 6 $ $ $ 5$0 '$7$ $
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 9.3 SPI-bus interface (PCA8547B) Data transfer to the device is made via a three-line SPI-bus (see Table 31). The SPI-bus is reset whenever the chip enable pin CE is inactive. Table 34.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 5 : VXEDGGUHVV FRQWURO E\WH 5$0 FRPPDQG E\WH 0 6 % & 5 2 6 / 6 % (;$03/(6 D WUDQVPLW WZR E\WHV RI GLVSOD\ 5$0 GDWD 5$0 '$7$ 5$0 '$7$ E WUDQVPLW WZR FRPPDQG E\WHV &200$1' &200$1' 5$0 '$7$ F WUDQVPLW RQH FRPPDQG E\WH DQG WZR GLVSOD\ 5$0 GDWH E\WHV &200$1' 5$0 '$7$ DDD Data transfers are terminated by de-asserting CE (set CE to logic 1) Fig 43.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 5 : E 6$ E E WHPSHUDWXUH GDWD %&' XQXVHG E E E E E E E E E E E E WHPSHUDWXUH GDWD %&' E E E E E E E E E 6&/ 6',2 &( PLFURFRQWUROOHU GULYLQJ 6',2 3&$ % GULYLQJ 6',2 DDD Fig 45. SPI-bus read example PCA8547 Product data sheet All information provided in this document is subject to legal disclaimers. Rev.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 10. Internal circuitry 9'' $ 5(6(7 7 7 &/. 966 7 9/&' 6'$ 6&/ 9'' 9'' 9/&' %3 WR %3 6 WR 6 966 966 DDD (1) Output resistance, RO, see Table 37 on page 55. Fig 46. Device protection diagram for PCA8547A 9'' 6',2 5(6(7 7 7 &/. 966 7 9/&' &( 6&/ 9'' 9'' 9/&' %3 WR %3 6 WR 6 966 966 DDD (1) Output resistance, RO, see Table 37 on page 55. Fig 47.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 12. Limiting values Table 36. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). PCA8547 Product data sheet Symbol Parameter Conditions Min Max Unit VDD1 supply voltage 1 digital 0.5 +6.5 V VDD2 supply voltage 2 analog 0.5 +6.5 V IDD1 supply current 1 digital 50 +50 mA IDD2 supply current 2 analog 50 +50 mA VLCD LCD supply voltage 0.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 13. Static characteristics Table 37. Static characteristics VDD1 = 1.8 V to 5.5 V; VDD2 = 2.5 V to 5.5 V; VSS = 0 V; VLCD = 2.5 V to 9.0 V; Tamb = 40 C to +95 C; temperature measurement enabled; 1:4 multiplex drive mode; 1⁄4 bias; LCD outputs are open circuit; RAM is all written with logic 1; inputs at VSS or VDD; internal clock with maximum prescale factor; I2C-bus/SPI-bus inactive; unless otherwise specified.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump Table 37. Static characteristics …continued VDD1 = 1.8 V to 5.5 V; VDD2 = 2.5 V to 5.5 V; VSS = 0 V; VLCD = 2.5 V to 9.0 V; Tamb = 40 C to +95 C; temperature measurement enabled; 1:4 multiplex drive mode; 1⁄4 bias; LCD outputs are open circuit; RAM is all written with logic 1; inputs at VSS or VDD; internal clock with maximum prescale factor; I2C-bus/SPI-bus inactive; unless otherwise specified.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump DDD 9/&' P9 7HPSHUDWXUH & VLCD = 5 V to 9 V. Remark: Only valid if the charge pump is driven in a safe range as described in Figure 18 and Figure 19. a. VDD = 5 V DDD 9/&' P9 7HPSHUDWXUH & VLCD = 5 V to 9 V.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump DDD ,'' $ 7HPSHUDWXUH & VDD2 = 5.0 V; 1:4 multiplex drive mode; 1⁄4 bias; temperature measurement enabled; LCD outputs are open circuit; RAM all logic 1; inputs at VSS or VDD; internal clock with max prescale factor; bus active. (1) Charge pump on; VDD1 = 5.5 V; charge pump configuration: VLCD = 2 VDD2; VPR[7:0] set to 7.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump DDD ,'' /&' $ 7HPSHUDWXUH & VDD1 = VDD2 = 5.0 V; 1:4 multiplex drive mode; 1⁄4 bias; LCD outputs are open circuit; RAM all logic 1; inputs at VSS or VDD; internal clock with max prescale factor; bus inactive; charge pump off; VLCD = 7.0 V, external supplied; display enabled. Fig 51.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 14. Dynamic characteristics Table 38. Dynamic characteristics VDD = 1.8 V to 5.5 V; VSS = 0 V; VLCD = 2.5 V to 9.0 V; Tamb = 40 C to +95 C; unless otherwise specified.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump Table 39. Timing characteristics: I2C-bus VDD1 = 1.8 V to 5.5 V; VDD2 = 2.5 V to 5.5 V; VSS = 0 V; Tamb = 40 C to +95 C; unless otherwise specified. Symbol Parameter fSCL tBUF Conditions Min Typ Max Unit SCL clock frequency - - 400 kHz bus free time between a STOP and START condition 1.3 - - s tHD;STA hold time (repeated) START condition 0.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump Table 40. Timing characteristics: SPI-bus VDD = 1.8 V to 5.5 V; VSS = 0 V; Tamb = 40 C to +95 C. All timing values are valid within the operating supply voltage and temperature range and referenced to VIL and VIH with an input voltage swing of VSS to VDD. Symbol Parameter Conditions VDD < 2.7 V VDD 2.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 16.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 17. Handling information All input and output pins are protected against ElectroStatic Discharge (ESD) under normal handling. When handling Metal-Oxide Semiconductor (MOS) devices ensure that all normal precautions are taken as described in JESD625-A, IEC 61340-5 or equivalent standards. 18. Soldering of SMD packages This text provides a very brief insight into a complex technology.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 18.3 Wave soldering Key characteristics in wave soldering are: • Process issues, such as application of adhesive and flux, clinching of leads, board transport, the solder wave parameters, and the time during which components are exposed to the wave • Solder bath specifications, including temperature and impurities 18.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump temperature maximum peak temperature = MSL limit, damage level minimum peak temperature = minimum soldering temperature peak temperature time 001aac844 MSL: Moisture Sensitivity Level Fig 57. Temperature profiles for large and small components For further information on temperature profiles, refer to Application Note AN10365 “Surface mount reflow soldering description”.
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx NXP Semiconductors PCA8547 Product data sheet 19. Appendix 19.1 LCD segment driver selection Table 43.
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx Selection of LCD segment drivers …continued Type name Number of elements at MUX VDD (V) VLCD (V) ffr (H
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx Extra feature: Temperature sensor. [4] Extra feature: 6 PWM channels.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 20. Abbreviations Table 44.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 21.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 22. Revision history Table 45. Revision history Document ID Release date Data sheet status Change notice Supersedes PCA8547 v.1 20140121 Product data sheet - - PCA8547 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 21 January 2014 © NXP B.V. 2014. All rights reserved.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 23. Legal information 23.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Translations — A non-English (translated) version of a document is for reference only.
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 25. Tables Table 1. Table 2. Table 3. Table 4. Table 5. Table 6. Table 7. Table 8. Table 9. Table 10. Table 11. Table 12. Table 13. Table 14. Table 15. Table 16. Table 17. Table 18. Table 19. Table 20. Table 21. Table 22. Table 23. Table 24. Table 25. Table 26. Table 27. Table 28. Table 29. Table 30. Table 31. Table 32. Table 33. Table 34. Table 35. Table 36. Table 37. Table 38. Table 39. Table 40. Ordering information .
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 26. Figures Fig 1. Fig 2. Fig 3. Fig 4. Fig 5. Fig 6. Fig 7. Fig 8. Fig 9. Fig 10. Fig 11. Fig 12. Fig 13. Fig 14. Fig 15. Fig 16. Fig 17. Fig 18. Fig 19. Fig 20. Fig 21. Fig 22. Fig 23. Fig 24. Fig 25. Fig 26. Fig 27. Block diagram of PCA8547A . . . . . . . . . . . . . . . . .3 Block diagram of PCA8547B . . . . . . . . . . . . . . . . .4 Pin configuration for TQFP64 (PCA8547AHT) . . .
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 27. Contents 1 General description . . . . . . . . . . . . . . . . . . . . . . 1 2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 4.1 Ordering options . . . . . . . . . . . . . . . . . . . . . . . . 2 5 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PCA8547 NXP Semiconductors 4 x 44 automotive LCD driver with integrated charge pump 15.1 16 17 18 18.1 18.2 18.3 18.4 19 19.1 20 21 22 23 23.1 23.2 23.3 23.4 24 25 26 27 Quality information . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . Handling information. . . . . . . . . . . . . . . . . . . . Soldering of SMD packages . . . . . . . . . . . . . . Introduction to soldering . . . . . . . . . . . . . . . . . Wave and reflow soldering . . . . . .