Datasheet

ManualsBrandsNXP SEMICONDUCTORS ManualsBJTs & IGBTsTransistor

1. Product profile

1.1 General description

NPN/PNP Resistor-Equipped Transistors (RET) in Surface-Mounted Device (SMD) plastic

packages.

1.2 Features and benefits

1.3 Applications

 Low current peripheral driver

 Control of IC inputs

 Replaces general-purpose transistors in digital applications

1.4 Quick reference data

PEMD3; PIMD3; PUMD3

NPN/PNP resistor-equipped transistors;

R1 = 10 k, R2 = 10 k

Rev. 11 — 25 September 2013 Product data sheet

Table 1. Product overview

Type number Package PNP/PNP

complement

NPN/NPN

complement

Package

configuration

NXP JEITA

PEMD3 SOT666 - PEMB11 PEMH11 ultra small and flat lead

PIMD3 SOT457 SC-74 - - small

PUMD3 SOT363 SC-88 PUMB11 PUMH11 very small

 100 mA output current capability  Reduces component count

 Built-in bias resistors  Reduces pick and place costs

 Simplifies circuit design  AEC-Q101 qualified

Table 2. Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

Per transistor; for the PNP transistor (TR2) with negative polarity

CEO

collector-emitter voltage open base - - 50 V

output current - - 100 mA

R1 bias resistor 1 (input) 7 10 13 k

R2/R1 bias resistor ratio 0.8 1 1.2

Summary of content (18 pages)

PAGE 1
PEMD3; PIMD3; PUMD3 NPN/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k Rev. 11 — 25 September 2013 Product data sheet 1. Product profile 1.1 General description NPN/PNP Resistor-Equipped Transistors (RET) in Surface-Mounted Device (SMD) plastic packages. Table 1.
PAGE 2
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 2. Pinning information Table 3. Pinning Pin Description Simplified outline 1 GND (emitter) TR1 2 input (base) TR1 3 output (collector) TR2 4 GND (emitter) TR2 5 input (base) TR2 6 output (collector) TR1 6 5 4 Graphic symbol 6 5 R1 4 R2 TR2 1 2 3 TR1 R2 001aab555 1 R1 2 3 006aaa143 3. Ordering information Table 4.
PAGE 3
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 5. Limiting values Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).
PAGE 4
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 006aac766 500 Ptot (mW) (1) 400 (2) 300 200 100 0 -75 -25 25 75 125 175 Tamb (°C) (1) SOT457; FR4 PCB, standard footprint (2) SOT363 and SOT666; FR4 PCB, standard footprint Fig 1. Per device: Power derating curves 6. Thermal characteristics Table 7.
PAGE 5
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 006aac751 103 duty cycle = 1 Zth(j-a) (K/W) 0.75 0.5 0.33 0.2 102 0.1 0.05 10 0.02 0.01 0 1 10-5 10-4 10-3 10-2 10-1 1 10 102 103 tp (s) FR4 PCB, standard footprint Fig 2. Transient thermal impedance from junction to ambient as a function of pulse duration for PEMD3 (SOT666); typical values 006aac767 103 duty cycle = 1 Zth(j-a) (K/W) 0.75 0.5 0.33 102 0.2 0.1 0.05 10 0.02 0.
PAGE 6
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 006aac750 103 duty cycle = 1 Zth(j-a) (K/W) 0.75 0.5 0.33 0.2 102 0.1 0.05 0.02 10 0.01 0 1 10-5 10-4 10-3 10-2 10-1 1 10 102 103 tp (s) FR4 PCB, standard footprint Fig 4. Transient thermal impedance from junction to ambient as a function of pulse duration for PUMD3 (SOT363); typical values PEMD3_PIMD3_PUMD3 Product data sheet All information provided in this document is subject to legal disclaimers. Rev.
PAGE 7
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 7. Characteristics Table 8. Characteristics Tamb = 25 C unless otherwise specified.
PAGE 8
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 006aac768 103 hFE 006aac769 1 (1) VCEsat (V) (2) (3) 102 10-1 (1) 10 (2) (3) 1 10-1 1 102 10 10-2 1 102 10 IC (mA) IC (mA) VCE = 5 V IC/IB = 20 (1) Tamb = 100 C (1) Tamb = 100 C (2) Tamb = 25 C (2) Tamb = 25 C (3) Tamb = 40 C (3) Tamb = 40 C Fig 5. TR1 (NPN): DC current gain as a function of collector current; typical values Fig 6.
PAGE 9
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 006aac772 3 Cc (pF) 006aac757 103 fT (MHz) 2 102 1 0 0 10 20 30 40 50 VCB (V) 10 10-1 102 10 IC (mA) f = 1 MHz; Tamb = 25 C Fig 9. 1 VCE = 5 V; Tamb = 25 C TR1 (NPN): Collector capacitance as a function of collector-base voltage; typical values 006aac773 103 hFE Fig 10.
PAGE 10
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 006aac775 -10 006aac776 -10 VI(off) (V) VI(on) (V) (1) (1) (2) (2) -1 -1 (3) -10-1 -10-1 -1 -102 -10 (3) -10-1 -10-1 -1 IC (mA) -10 IC (mA) VCE = 0.3 V VCE = 5 V (1) Tamb = 40 C (1) Tamb = 40 C (2) Tamb = 25 C (2) Tamb = 25 C (3) Tamb = 100 C (3) Tamb = 100 C Fig 13. TR2 (PNP): On-state input voltage as a function of collector current; typical values 006aac777 6 Cc (pF) Fig 14.
PAGE 11
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 8. Test information 8.1 Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. 9. Package outline 1.7 1.5 6 3.1 2.7 0.6 0.5 5 6 4 1.1 0.9 5 4 2 3 0.6 0.2 0.3 0.1 1.7 1.5 3.0 2.5 1.3 1.1 1.7 1.3 pin 1 index 1 2 1 3 0.18 0.08 0.27 0.
PAGE 12
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 10. Soldering 3.45 1.95 0.45 0.55 (6×) (6×) 0.95 solder lands solder resist 3.3 2.825 0.95 solder paste occupied area 0.7 (6×) Dimensions in mm 0.8 (6×) 2.4 sot457_fr Fig 20. Reflow soldering footprint PIMD3 (SOT457/SC-74) 5.3 1.5 (4×) solder lands 1.475 0.45 (2×) 5.05 solder resist occupied area 1.475 Dimensions in mm preferred transport direction during soldering 1.45 (6×) 2.85 sot457_fw Fig 21.
PAGE 13
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 2.65 solder lands 2.35 1.5 0.4 (2×) 0.6 0.5 (4×) (4×) solder resist solder paste 0.5 (4×) 0.6 (2×) occupied area 0.6 (4×) Dimensions in mm 1.8 sot363_fr Fig 22. Reflow soldering footprint PUMD3 (SOT363/SC-88) 1.5 solder lands 0.3 2.5 4.5 solder resist occupied area 1.5 Dimensions in mm 1.3 1.3 preferred transport direction during soldering 2.45 5.3 sot363_fw Fig 23.
PAGE 14
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 2.75 2.45 2.1 1.6 solder lands 0.4 (6×) 0.25 (2×) 0.538 2 1.7 1.075 0.3 (2×) 0.55 (2×) placement area solder paste occupied area 0.325 0.375 (4×) (4×) Dimensions in mm 1.7 0.45 (4×) 0.6 (2×) 0.5 (4×) 0.65 (2×) sot666_fr Fig 24. Reflow soldering footprint PEMD3 (SOT666) PEMD3_PIMD3_PUMD3 Product data sheet All information provided in this document is subject to legal disclaimers. Rev.
PAGE 15
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 11. Revision history Table 9. Revision history Document ID Release date Data sheet status Change notice Supersedes PEMD3_PIMD3_ PUMD3 v.11 20130925 Product data sheet - PEMD3_PIMD3_ PUMD3 v.10 Modifications: PEMD3_PIMD3_ PUMD3 v.
PAGE 16
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors 12. Legal information 12.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
PAGE 17
PEMD3; PIMD3; PUMD3 NXP Semiconductors NPN/PNP resistor-equipped transistors No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Translations — A non-English (translated) version of a document is for reference only.
PAGE 18
NXP Semiconductors PEMD3; PIMD3; PUMD3 NPN/PNP resistor-equipped transistors 14. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 8.1 9 10 11 12 12.1 12.2 12.3 12.4 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . .