Datasheet

Revision History
MPC5674F Microcontroller Data Sheet, Rev. 9
Freescale Semiconductor 127
Appendix B Revision History
Table 46 describes the changes made to this document between revisions.
Table 46. Revision History
Revision
(Date)
Description of changes
2
(Sept 2008)
Initial release, NDA Required.
3
(Nov 2009)
Changes between Rev.2 and Rev. 3:
Added 516-pin package figures.
Signals table: Updates throughout entire table.
Updated Section 4.6, “Power Up/Down Sequencing”
Updated features list.
Updated flash PFCPR1 settings table.
Fixed JTAG Test Clock Input Timing figure so the spec #’s in table matched figure.
Updated Orderable Part numbers table.
Moved signals table to be an appendix.
Added 324-pin package thermals.
Updated part numbers in orderable parts table (missing F: MPC5674F).
FMPLL Electrical Spec table:
Spec #1 changed min values of 4 to 8
Removed last sentence of footnote 2
Added note "Upper tolerance of less than 1% is allowed on 40MHz crystal."
Oscillator Electrical Spec table:
Moved predivider op. frequency spec from this table to the FMPLL Electrical Spec table
Removed footnote #3 (since VDDE9 is an external supply and has no relation to the oscillator, PMC, or PLL).
Added maximum solder temperature to Absolute Max Ratings table.
PMC Operating Conditions table:
Removed JTemp row.
Changed VDDR to VDDREG (naming consistency)
Changed VDD12 to VDD (naming consistency)
PMC Electrical Spec table:
Added VDDREG to this parameter “Trimmed bandgap reference voltage / voltage dependence (V
DDREG
)”
Changed VDDSTEP to LVDSTEP12 (naming consistency)
Added two conditons to the opening statements of Section 4.6, “Power Up/Down Sequencing.”
DC Electrical Specifications table:
spec #9 (Fast I/O Input High Voltage)
spec #10 (Fast I/O Input Low Voltage)
spec #24 (Operating Current 1.2 V Supplies; IDD)
spec #25 (Operating Current 3.3 V Supplies; IDDSYN)
spec #32 (Analog Input Current, Channel Off; IINACT_A)
footnote #12 ("IOH_S = {11.6} mA...")