Datasheet

i.MX 6Dual/6Quad Applications Processors for Industrial Products, Rev. 6, 11/2018
28 NXP Semiconductors
Electrical Characteristics
4.1.7 USB PHY Current Consumption
4.1.7.1 Power Down Mode
In power down mode, everything is powered down, including the VBUS valid detectors, typical condition.
Table 10 shows the USB interface current consumption in power down mode.
NOTE
The currents on the VDD_HIGH_CAP and VDD_USB_CAP were
identified to be the voltage divider circuits in the USB-specific level shifters.
4.1.8 SATA Typical Power Consumption
Table 11 provides SATA PHY currents for certain Tx operating modes.
NOTE
Tx power consumption values are provided for a single transceiver. If
T = single transceiver power and C = Clock module power, the total power
required for N lanes = N x T + C.
Table 10. USB PHY Current Consumption in Power Down Mode
VDD_USB_CAP (3.0 V) VDD_HIGH_CAP (2.5 V) NVCC_PLL_OUT (1.1 V)
Current 5.1 μA1.7 μA <0.5 μA
Table 11. SATA PHY Current Drain
Mode Test Conditions Supply Typical Current Unit
P0: Full-power state
1
Single Transceiver SATA_VP 11 mA
SATA_VPH 13
Clock Module SATA_VP 6.9
SATA_VPH 6.2
P0: Mobile
2
Single Transceiver SATA_VP 11 mA
SATA_VPH 11
Clock Module SATA_VP 6.9
SATA_VPH 6.2
P0s: Transmitter idle Single Transceiver SATA_VP 9.4 mA
SATA_VPH 2.9
Clock Module SATA_VP 6.9
SATA_VPH 6.2