Datasheet
Introduction
i.MX 6Dual/6Quad Applications Processors for Industrial Products, Rev. 6, 11/2018
NXP Semiconductors 3
Figure 1 describes the part number nomenclature to identify the characteristics of the specific part number
you have (for example, cores, frequency, temperature grade, fuse options, silicon revision). Figure 1
applies to the i.MX 6Dual/6Quad.
The two characteristics that identify which data sheet a specific part applies to are the part number series
field and the temperature grade (junction) field:
• The i.MX 6Dual/6Quad Automotive and Infotainment Applications Processors data sheet
(IMX6DQAEC) covers parts listed with “A (Automotive temp)”
•The
i.MX 6Dual/6Quad
Applications Processors for Consumer Products data sheet (IMX6DQCEC)
covers parts listed with “D (Commercial temp)” or “E (Extended Commercial temp)”
• The i.MX 6Dual/6Quad Applications Processors for Industrial Products data sheet (IMX6DQIEC)
covers parts listed with “C (Industrial temp)”
The Ensure that you have the right data sheet for your specific part by checking the temperature grade
(junction) field and matching it to the right data sheet. If you have questions, see nxp.com/imx6series or
contact your NXP representative.
Table 1. Example Orderable Part Numbers
Part Number Quad/Dual CPU Options
Speed
1
Grade
1
If a 24 MHz input clock is used (required for USB), the maximum SoC speed is limited to 792 MHz.
Temperature
Grade
Package
MCIMX6Q7CVT08AC i.MX 6Quad Includes VPU, GPU 800 MHz Industrial 21 mm x 21 mm, 0.8 mm
pitch, FCPBGA (lidded)
MCIMX6Q7CVT08AD i.MX 6Quad Includes VPU, GPU 800 MHz Industrial 21 mm x 21 mm, 0.8 mm
pitch, FCPBGA (lidded)
MCIMX6Q7CVT08AE i.MX 6Quad Includes VPU, GPU 800 MHz Industrial 21 mm x 21 mm, 0.8 mm
pitch, FCPBGA (lidded)
MCIMX6D7CVT08AC i.MX 6Dual Includes VPU, GPU 800 MHz Industrial 21 mm x 21 mm, 0.8 mm
pitch, FCPBGA (lidded)
MCIMX6D7CVT08AD i.MX 6Dual Includes VPU, GPU 800 MHz Industrial 21 mm x 21 mm, 0.8 mm
pitch, FCPBGA (lidded)
MCIMX6D7CVT08AE i.MX 6Dual Includes VPU, GPU 800 MHz Industrial 21 mm x 21 mm, 0.8 mm
pitch, FCPBGA (lidded)