Datasheet

i.MX 6Dual/6Quad Applications Processors for Industrial Products, Rev. 6, 11/2018
4 NXP Semiconductors
Introduction
Figure 1. Part Number Nomenclature—i.MX 6Quad and i.MX 6Dual
1.2 Features
The i.MX 6Dual/6Quad processors are based on Arm Cortex-A9 MPCore platform, which has the
following features:
• Arm Cortex-A9 MPCore 4xCPU processor (with TrustZone
®
)
• The core configuration is symmetric, where each core includes:
— 32 KByte L1 Instruction Cache
— 32 KByte L1 Data Cache
— Private Timer and Watchdog
— Cortex-A9 NEON MPE (Media Processing Engine) Co-processor
The Arm Cortex-A9 MPCore complex includes:
• General Interrupt Controller (GIC) with 128 interrupt support
• Global Timer
• Snoop Control Unit (SCU)
• 1 MB unified I/D L2 cache, shared by two/four cores
• Two Master AXI (64-bit) bus interfaces output of L2 cache
Part differentiator @
Industrial with VPU, GPU, no MLB 7
Automotive with VPU, GPU 6
Consumer with VPU, GPU 5
Automotive with GPU, no VPU 4
Temperature Tj
+
Extended commercial: -20 to +105
°
CE
Industrial: -40 to +105
°
CC
Automotive: -40 to +125
°
CA
Frequency $$
800 MHz
2
(Industrial grade) 08
852 MHz (Automotive grade) 08
1 GHz
3
10
1.2 GHz 12
Package type
RoHS
FCPBGA 21x21 0.8mm (lidded) VT
FCPBGA 21x21 0.8mm (non lidded) YM
Qualification level MC
Prototype Samples PC
Mass Production MC
Special SC
Part # series X
i.MX 6Quad Q
i.MX 6Dual D
Silicon revision
1
A
Rev 1.2 C
Rev 1.3 D
Rev 1.6 E
Fusing %
Default setting
A
HDCP enabled
C
MC IMX6 X @ + VV $$ % A
1. See the nxp.com\imx6series Web page for latest information on the available silicon revision.
2. If a 24 MHz input clock is used (required for USB), the maximum SoC speed is limited to 792 MHz.
3. If a 24 MHz input clock is used (required for USB), the maximum SoC speed is limited to 996 MHz.