Datasheet

NXP Semiconductors

UM11183

KITFS85SKTEVM evaluation board

User manual Rev. 3 — 6 December 2019

35 / 51

The current mode is refreshed only when Poll button is activated. If required, this has to

be done at start up (Poll button is disabled by default). See Figure 25.

Figure 25. Disabling device mode polling

To move from one mode to the other, select the mode with switch mode drop-down

button. If the requested mode is not confirmed by the device (if debug pin is not set, for

instance), the drop-down menu switches back to the previous mode.

8.3 Working with the Script editor

The register and OTP emulation can be configured with the script editor. This is

particularly useful to try various OTP configurations in Emulation mode.

Figure 26. Script Editor

The main subareas of this panel are:

• Send and receive command: displays a summary of commands sent and received

from the device

• Command script editor: builds commands to be sent to the device

• Script text editor: sends a sequence of register configurations from a text file or from

command edited directly in this area

• Script results: displays result status of each command sent to the device

8.3.1 Script text editor

Using Script editor, you can execute any command either directly or from a file. It is

also possible to save and modify a script. Using the brush symbol, it is possible to clean

windows if needed.