Datasheet

NXP Semiconductors
UM11183
KITFS85SKTEVM evaluation board
UM11183 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2019. All rights reserved.
User manual Rev. 3 — 6 December 2019
37 / 51
Figure 27. Build a command
The value 0x0800 is sent to the register M_REG_CTRL1 (BUCK2DIS). The user can
then send it to the device by clicking the arrow (see Figure 28).
Figure 28. Send script
Figure 29. Correct format
Figure 30. Wrong format (“//” missing in second line)