QUICK START GUIDE MC56F80000-EVK MC56F80000 EVALUATION KIT
GET TO KNOW THE MC56F80000-EVK Power/USB OpenSDA and Virtual Serial Port Power/USB Virtual Serial Port (CP210x is DNP by Default SW5 SW4 SW3 SW2 SW1 Reset J7 Adapter/ 5 V Only J11 Reset Source Selection Jumper JTAG Port for 56F80748 J2 I/O Header J3 I/O Header J1 I/O Header J4 I/O Header PWM LEDs ANA3/3B-2 GA4-4 GA5-6 GB1-8 GB4-10 GB5-12 1-GF1 3-GE7 5-GE4 7-GE5 9-GE2 11-GE3 13-GE0 15-GE1 1-NC 3-NC 5-NC 7-NC 9-NC 11-NC NC-15 NC-13 NC-11 NC-9 NC-7 NC-5 GC6-3 NC-1 20-GC15 18-GC14 16-AREF 14-GND 12-
QUICK START GUIDE MC56F80000-EVK OPERATION NOTES 1. MC56F80000-EVK can be powered by either of the USB connectors (J12, J26), or the adapter input (J7). Beware that only an adapter with 5V output can be used. 2. When the board is powered up, a green LED D2 will illuminate, indicating 3.3V is on. If the board is powered by USB connector (J12), an orange LED D4 will also illuminate, indicating K26 is powered. 3.
GET STARTED Download installation software and documentation under “Jump Start Your Design” at www.nxp.com/MC56F80000-EVK. SUPPORT Visit www.nxp.com/support for a list of phone numbers within your region. WARRANTY Visit www.nxp.com/warranty for complete warranty information. www.nxp.com/MC56F80000-EVK NXP, the NXP logo and NXP SECURE CONNECTIONS FOR A SMARTER WORLD are trademarks of NXP B.V. All other product or service names are the property of their respective owners. © 2022 NXP B.V.
