User guide

Using the CodeWarrior™ QUICC Engine™ Utility
Using the QUICC Engine™ Utility
47 MPC8568E Kit Configuration Guide
Figure 5.3 QEU Main Window with the Ethernet Use Case Project Open
3. In the Device view pane, click on the green block labeled UCC1 (Unified
Communications Controller 1).
The QEU displays a tabbed window titled Ethernet configuration on UCC1.
The tabs of this window show the UCC1 block’s current configuration block. These
tabs show that UCC1 is configured:
• As an Ethernet device with a MAC address of 10-34-56-78-9A-BC.
• To transmit and receive at 1 Gbps over a GMII (Gigabyte Media Independent
Interface) interface.
4. Click Cancel.
The Ethernet configuration on UCC1 window closes.
5. In the Device view pane, click on the green block labeled UCC2 (Unified
Communications Controller 2).
The QEU displays a tabbed window titled Ethernet configuration on UCC2.
The tabs of this window show the UCC2 block’s current configuration. These tabs
show that UCC2 is configured the same as UCC1, except that the MAC address
assigned to UCC2 is 18-34-56-78-9A-BC.