Reference guide

Stepper Motor Drive Theory
Cluster (Dashboard) Using S12HZ256 as a Single-Chip Solution Designer Reference Manual, Rev. 0
22 Freescale Semiconductor
3.7 LCD2 Panel Initialization and Checking
In this reference design, the 4*18 segment LCD panel is selected. The LCD characters can be turned
on/off by writing to the internal LCD registers, which are located at address 0x128–0x137. The LCD2.lib
is also available for use. Users need to link to the LCD2.lib in their project.
Please refer to the firmware project (5. LCD2DisplayCheck) for more detailed information. See
Figure 3-12 and Figure 3-13.
Figure 3-12. LCD2DisplayCheck Screen
Figure 3-13. Verify LCD2 Segments
and Their Connections