Datasheet

UBA2036TS_1 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 01 — 30 October 2008 6 of 13
NXP Semiconductors
UBA2036TS
Full bridge control IC for HID automotive lighting
8. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). All voltages are measured with respect to signal
ground (pin 14); positive currents flow into the chip. The voltage ratings are valid provided other ratings are not violated.
Symbol Parameter Conditions Min Max Unit
General
T
amb
ambient temperature −40 +125 °C
T
j
junction temperature −40 +150 °C
T
stg
storage temperature −55 +150 °C
Voltages
V
VDD
voltage on pin VDD DC 0 14 V
maximum pulse time = 100 ns 0 17 V
V
HV
voltage on pin HV 0 550 V
V
SHL
voltage on pin SHL with respect to PGND and SGND −3 550 V
with respect to SGND;
maximum pulse time = 1 µs
−14 550 V
V
SHR
voltage on pin SHR with respect to PGND and SGND −3 550 V
with respect to SGND;
maximum pulse time = 1 µs
−14 550 V
V
FSL
voltage on pin FSL with respect to SHL 0 14 V
V
FSR
voltage on pin FSR with respect to SHR 0 14 V
V
GHL
voltage on pin GHL V
SHL
V
FSL
V
V
GHR
voltage on pin GHR V
SHR
V
FSR
V
V
GLL
voltage on pin GLL V
PGND
V
VDD
V
V
GLR
voltage on pin GLR V
PGND
V
VDD
V
V
PGND
voltage on pin PGND 0 5 V
V
SS(CLK)
CLK ground supply voltage t < 1 s 0 464 V
V
DD(CLK)
CLK supply voltage t < 1 s 0 464 V
with respect to V
SS(CLK)
:
DC 0 14 V
maximum pulse time = 100 ns 0 17 V
V
I
input voltage pins CLK, SU, BD, and DD; with respect to V
SS(CLK)
:
DC 0 V
VDD
V
maximum pulse time = 100 ns 0 17 V
pin RC:
maximum pulse time = 100 ns 0 17 V
SR slew rate pins SHL and SHR - 6 V/ns
pin V
SS(CLK)
- 0.5 V/µs
Currents
R
osc
oscillator resistance connected between pins VDD and
RC
100 - kΩ