Datasheet

UBA2036TS_1 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 01 — 30 October 2008 9 of 13
NXP Semiconductors
UBA2036TS
Full bridge control IC for HID automotive lighting
11. Quality information
This product has been qualified to the appropriate Automotive Electronics Council (AEC)
standard Q100 and Q101 and is suitable for use in automotive critical applications.
V
hys
hysteresis voltage V
SS(CLK)
=0V; V
DD(CLK)
= 12 V - 100 mV
I
I
input current - 0 1 µA
f
bridge
bridge frequency V
RC
= 0 V - - 200 kHz
supply for CLK
I
DD(CLK)
CLK supply current V
SS(CLK)
=0V; V
DD(CLK)
= 14 V - 420 625 µA
V
DD(CLK)
CLK supply voltage V
SS(CLK)
= 0 V 5.75 - 14 V
BD input
V
BD
voltage on pin BD 1.23 1.29 1.35 V
I
I
input current - 0 1 µA
Internal oscillator
f
osc(int)
internal oscillator frequency V
CLK
=0V; V
SS(CLK)
= 0 V - - 100 kHz
K
osc
oscillator constant f
bridge
= 500 Hz 0.89 0.97 1.05
Table 6. Characteristics
…continued
T
j
= -40 ° Cto125 ° C; all voltages are measured with respect to signal ground (pin 14); currents are positive when flowing into
the IC, Unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
(1) Temperature = −25 °C
(2) Temperature = 25 °C
(3) Temperature = 125 °C
Fig 3. Typical I
I
(pin HV) when VDD connected to SGND, as function of V
HV
and temperature
014aaa634
V
HV
(V)
0 600400200
4
8
12
I
I
(pin HV)
(µA)
0
(1)
(2)
(3)