Daim Ntawv Qhia Tus Neeg Siv

Figure 5. Downloading and debugging connections
The following figure shows the connections when the user needs to monitor the working status by FreeMASTER.
Figure 6. Monitoring by FreeMASTER connections
For details on the J-LINK debugger, visit nxp.com and search for “J-Link”.
7.2 Downloading and debugging firmware
7.2.1 Downloading an existing WPR1500 HVOUT project with IAR
To download an existing WPR1500 project using IAR, perform the following steps:
1. Set the IAR Embedded Workbench.
The IAR embedded Workbench Tool is required. The IAR version should be 9.10.2 or higher. Because the receiver driver
library is already included in the library folder of the wireless charger application project, you can open the application
project and build the applications directly whenever the wpr_lib.a is ready.
NXP Semiconductors
Getting Started
WPR1500-HV Wireless Charging Receiver Application User’s Guide, Rev. 3.0, 4 July 2022
User Guide 5 / 17