Installation Guide

68
51
Main burner
4
Rear
740-LS 24SB
740-LS 30BI
14
1
1. Remove the grates and flame tamers.
2. Remove the 1 screw that hold the burner in place. Set the
screws aside. Remove the burner from the grill by lifting the
burner out.
Remove the main burner screw
3. Use a 6 mm socket and wrench or 6 mm nut driver to remove
thebrassorificefromtheendofgasvalve.AndplacetheNGorifice
the main burner orifice is 1.51mm (NG part1).
A:
install the main burn orifice( NG part 1)
4. Reinsert the burner and reattach using the screw
previously removed. Repeat the procedure for each main
burner.
IMPORTANT: Check that the burner is properly installed
inside of the gas valve.
5. Position the igniters so they are ¼” (6.0 mm) away from each
burner.
A