Installation Guide

9
2. Use a screwdriver to loosen the screw securing the light
3. Remove light and light casing
4. Remove the glass cover from the light compartment.
5.Use a screwdriver to loosen the two screws locking the bulb.
Pull out the light bulb and replace with a new bulb.
6. Reverse the instructions from steps 5-1 for installation.
Cleaning Method
Follow steps 1-4 above for glass cover removal. Use a damp towel to clean the surface of glass cover.
Make sure the glass cover is completely dry before re-installing.
WARNING
Make sure the light switch is in the
“OFF”
position and power plug is disc
onnected from power outlet
prior to cleaning the glass cover.
WARNING
The light glass cover should not be in contact with water or any other liquid when it’s warm. Sudden
change of temperature may cause cracks on glass cover.
Bulb Specification
Bulb Type: Halogen
Wattage: 10 watts per bulb
Voltage: 12 volts
Please contact customer service at 888-909-8818 for assistance on bulb replacement information.
WARNING
To ensure continued protection against electric shock:
Connect to properly grounded outlets only.
Do not expose to rain.
Keep extension cord connections dry and off the ground.
Light Instructions
9