Dimensions Guide

The rangetop may be installed flush to the rear wall. You may install a non-combustible

material on the rear wall above the cooktop and up to the vent hood. It is not necessary to

install non-combustible materials behind the rangetop below the counter top height.

The minimum distance from the side of the rangetop above the counter top to combustible

sidewalls must be at least 10 inches.

INSTALLATION INSTRUCTIONS

Dimensions and Clearances

INSTALLATION INSTRUCTIONS

26.7"

7.5"

36"

PAGE 1
INSTALLATION INSTRUCTIONS Dimensions and Clearances The rangetop may be installed flush to the rear wall. You may install a non- combustible material on the rear wall above the cooktop and up to the vent hood. It is not necessary to install non-combustible materials behind the rangetop below the counter top height. The minimum distance from the side of the rangetop above the counter top to combustible sidewalls must be at least 10 inches. INSTALLATION INSTRUCTIONS 36" " .7 26 7.
PAGE 2
" .7 26 48" 7.
PAGE 3
Installation Dimensions and Clearances Cabinet tolerances ± 1/16" (± 1.6 mm) unless otherwise noted. 1 1/2”" (3.8 cm) typical countertop thickness 10”" (25.4 cm) to combustible side wall min. both sides B 7 1/2" (19 cm) Recommended gas and electrical service location, consult local code Mounting platform 1" (2.5 cm) min. thickness 36" (91.4 cm) typical Cabinet/Countertop Dimensions - Front View 13" (33.0 cm) max. 3 C B C 36" (91.4 cm) 36" (91.4 cm) * 42" (106.7 cm) ** 48" (121.
PAGE 4
Cabinet/Countertop Dimensions (cont.) Cabinet tolerances ±1/16" (±1.6 mm) unless otherwise noted. 23.7" (60.2 cm) Cabinet face Installed control panel overhang 1/7/10" (4.35 cm) Gas and electrical connections at right rear section of chassis Countertop Mounting platform Installed Rangetop - Side View Gas connection and power cord may be routed through bottom or back of chassis Increase countertop and overhang additional 2 1/2" (6.4 cm) min.