Installation Guide and Users Manual Professional Series CXW-298-A09 IMPORTANT: Read and save these instructions.
Thank you for purchasing your NXR range hood.We appreciate your business and we recommend that you read this entire user’s manual before operating your new appliance for the first time. Warranty Duro is not responsible for incidental or consequential damages.Under no circumstances will Duro’s liability exceed the cost that you paid for the product.Some provinces/states do not allow the exclusion or limitation of incidental or consequential damages,so the above limitation or exclusion may not apply to you.
Important Safety Notice Read all Instructions before Installing and operating this appliance Warranty TO OBTAIN SERVICE UNDER WARRANTY: You must present of original purchase date. The installation in this manual is intended for qualified installers, service technicians or persons with similar qualified background. Installation and electrical wiring must be done by qualified professionals and in accordance with all appliance codes and standards, including fire-rated construction.
Important Safety Notice Maintenance Read all Instructions before Installing and operating this appliance SAFETY WARNING:Never put your hand into area housing the fan while the fan is operating! For optimal operation,clean range hood and all baffle/spacer/filter/grease tunnel/oil container regularly/Regular care will help preserve the appliance of the range hood. Cleaning Exterior surfaces: Clean periodically with hot soapy and clean cotton cloth.
Range Hood Assembly: Parts supplied: No. Description No. 21.1 Bolt Electrical Box 21.7 21.2 21.6 21.8 Screw Capacitor 21.4 Processor Board 21.9 Screw 21.5 Electrical Box Cover Single-piece Chimney (Optional,sold separately) Type B (Connect to typeA) Length:1-3/10" Qty:4PCS (Qty:1PIECE) Type C(For Hood-mounting Bracket) Length:3/10" Qty:8PCS Type D(For Ducting Transition) Length:1/2" (Qty:2PCS) (Qty:2PCS) (Qty:1PCS) 4 Electrical Box Base Screw 21.
Range Hood Assembly: No. 1 2 Description No.
CONTROL BOARD Calculating Vent System Length PROCESSOR BOARD LAMP N L Q L M H RED N BLACK HALOGEN LIGHT BLACK BLUE YELLOW RED FUSE BLACK WHITE WHITE 120V 60Hz MOTOR CAPACITOR 20uF/500V 6 19
Venting Methods Option1: 18 7
Electrical Requirements 8 17
Preparation Measurements and Diagrams All measurements in parenthesis are in millimeter. All inch measurements are converted from millimeters, thus inch measurements are estimated.
Use and Care Information Installation Installations(refer to Page 4 for parts): 1.Measure the distance between stove top and the bottom of range hood.A distance of “27 to 30" is recommended*Due to difference ceiling height configurations,recommended height may not be applicable. 1.You have two ways(Aor B)to mount this range hood: A-1.Proceed if you would like to mount this range hood without using the hood-mounting bracket. A-2.
Troubleshooting Installation (Continued) 4. 5. 6. 7. 8. Turn power ON in control panel.Check all lights and fan operations. 9. Make sure to leave this Installation Guide for the homeowner.
Range Hood Operations (Continued) Range Hood Operations Control Panel Layout and Buttons Configurations: Q I I I I Increase Speed Decrease Speed LED Light Indicator LED Speed Indicator Power Control (On/Off) Light Control During this 3-minutes delay,changing speeds will not affect the countdown. Immediate Power-off While the fans are in 3-minute power-off delay mode,press the Power Control(on/Off)button once to turn OFF the fans immediately.
