User Manual

-3-
4. Operation Instructions
5. Setup Instructions
1) Door release function: When visitor calls from outdoor station, the monitor
rings, press Talk button to talk with the visitor, then press the Unlock button
to open the door. If the system connect 2 locks, press Call button/Unlock 2nd
button to open the second door.
2) Inner call: When the monitor is in standby mode, press Call button/Unlock
2nd button to activate the inner call.
5.1 User Code Setting
In the DT system, every apartment must have a unique identification called
User Code. The DIP switches are used to configure the User Code for each
Monitor.
• Bit-1~5 are used to User Code setting. The value is from 1 to 32, which
have 32 different codes for 32 apartments.
• Bit-11 is used to video match.
Bit State User Code Bit State User Code Bit State User Code
Code=1
Code=2
Code=3
Code=4
Code=5
Code=12
Code=13
Code=14
Code=15
Code=16
Code=23
Code=24
Code=25
Code=26
Code=27
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP
1 2 3 4 5 6 7 8 9 10 11 12
ON DIP