User's Manual

BATTERY
1. The is a battery powered PA loudspeaker. Be sure that you have completely charged the
battery prior to first use to maximize the battery’s lifespan.
The takes approximately 8 hours to fully charge. The automatically begins charging once the
power cord is connected to a power source.
The unit will also power on when connected to a power source even if the battery power is
low. When connected to a power source the will play while also charging the battery.
When the battery is full, the charging indicator light on the back will OFF.
2. Upon completion of the charging, please disconnect the power cable.
3. With standard usage, a fully charged battery can play for about 4-5 hours.
4. Battery can be recharged about 300 times in its lifetime.
5. When not in use, the speaker should always be set of OFF to prevent the unit from draining
the battery.
6. When the unit is not used for prolonged periods of time, the battery will gradually lose its
power. It is recommended to fully charge the battery at least every 60 days.
BLUETOOTH
Bluetooth Mode: When chose the Bluetooth mode, after pressing the button to the right, the
unit will sent out a beep. At the same time, the Bluetooth indicate will go twinkle. Then it will
search the Bluetooth signal. Open the Bluetooth of mobile phone. Find the Bluetooth name of
the unit called “BLUETOOTH” TO CONNECT. After a successful match, you can play the music in
mobile phone. When playing the music, you switch the other mode; you can press the play
button to continue the music without reconnect the Bluetooth.