User's Manual

17
English
EN
To use the (white/red) sockets:
1 Connect audio cables (white/red;
not supplied).
•
one end to the
(white/red) sockets on the back of
the device
• the other end to the audio out
(white/red) sockets on an auxiliary
device
2 Press on the remote control
(or tap
on the top panel
repeatedly) to select the RCA
audio input source.
☞
The indicator on the top panel
lights up.
3 Start music play on the auxiliary
device.
Listen from an auxiliary device
You can listen to music from an auxiliary
device through either the 3.5mm audio
input socket ( ) on the right side of
the dock or the (white/red)
sockets on the back panel of the Bluetooth
docking speaker.
To use the 3.5mm audio input socket:
Note:
• Make sure that the auxiliary device
has a 3.5mm headphone socket.
1 Connect the supplied 3.5mm
audio cable.
•
one end to the 3.5mm audio input
socket ( ) on the right side
of the dock
• the other end to the 3.5mm
headphone socket on an auxiliary
device
☞ The indicator on the top panel
lights up.
☞ The device switches to 3.5mm
audio input (AUX) mode
automatically.
2 Start music play on the auxiliary
device.
NYNE NH-5000_User Manual_A5.indb 17
NYNE NH-5000_User Manual_A5.indb 17
5/24/2012 10:17:02 AM
5/24/2012 10:17:02 AM