User's Manual

19
English
EN
• Check whether the sound output
is muted. Press
on the remote
control to resume sound output.
• Make sure that you have selected
an audio source for play.
• If you have selected the dock
source, check whether you have
docked your iPod/iPhone/iPad
securely. If you have a protective
case on your iPod/iPhone/iPad,
remove it and try again.
• If you have selected the Bluetooth
source, check whether the
Bluetooth connected device
supports Bluetooth profi le A2DP.
Check the user manual of the
device for details.
• If you have selected the Bluetooth
source, check whether wireless
connection has been set up
between the paired device and
NH-5000.
• If you are listening from an auxiliary
device, check the following points:
•
Make sure that you have started
music play on your auxiliary device.
• Try to adjust volume on your
auxiliary device.
• Check whether the 3.5mm audio
cable or audio cables (white/red)
have been connected securely
to both the Bluetooth docking
speaker and auxiliary device.
Why is there no picture or only distorted picture on the
TV?
• Check whether you have
connected component video
cables to both the device and TV.
• Check whether the TV is switched
on.
• Check whether you have selected
the correct video input source on
the TV.
6 Frequently asked
questions (FAQ)
Never try to repair the device yourself
as you may void your warranty. When
you encounter any problems, read the
FAQ before you take the device for
repair. You may also visit www.nyne.
com/support for help.
Contact your dealer if any of the
following occurs:
•
The power cord frays or fails.
• Liquid sprays or any object drops
into the device.
• The device is exposed to rain or
other moisture.
• The device is dropped or damaged
in any way.
• The performance of the device
changes substantially.
Why is there no power?
• Check whether you have
connected the power cable to
both the device and wall socket
securely.
• Check whether the mains power is
interrupted.
• Check whether you have turned
the
switch on the back
of the device to the
position.
Why is there no sound or only distorted sound?
• Press on the remote
control repeatedly (or swipe the
volume touchpad on the top
panel to the left or right) to adjust
volume.
• Press
, , , or
on the remote control repeatedly
to adjust the sound effect.
NYNE NH-5000_User Manual_A5.indb 19
NYNE NH-5000_User Manual_A5.indb 19
5/24/2012 10:17:03 AM
5/24/2012 10:17:03 AM