Owner's manual

7
POWER
During the warm-up, the
POWER LED will blink un-
til connection between the
TRANSMITTER and the RE-
CEIVER is established. It will
take 15 - 20 seconds for the
system boot up successfully.
NOTE: Transmitter`s HDMI
out will still function in
standby mode
Ensure your TV set or projec-
tor is set to the appropriate
HDMI source and is powered
on.
Press the Source button on
the transmitter, receiver or
remote control to cycle be-
tween source inputs.
After the power cords are
plugged into the pow
-
er supply, the transmitter
and receiver will be turned
on automatically. If it is in
Standby mode (Both POW
-
ER LED of transmitter and
receiver are lit in red), press
the POWER button either
on transmitter or receiver to
turn on the transmitter and
the receiver.
OR
OU
IR
SOURCE
INFO