Owner's manual

9
INFO KEY (REMOTE CONTROL)
EXAMPLE:
HDMI1(Input Displayed) CH1(Wireless Channel) 1280x1024 (Resolution) = OFF
IR KEY
IR blaster frequency default setting is 47KHz
Press once for current IR frequency status display. Press multiple times to cycle between three
frequencies.
e OSD shows: (Display 5secs)
HDMI1 CH1 1280x1024 = 47KHz
Press IR key again to switch IR blaster frequency.
- e OSD shows: (Display 5secs)
HDMI1 CH1 1280x1024 = 56KHz
OSD (On Screen Display) Description
Mode Status Description OSD Display (on RX)
Rx: Standby
Tx: Active-Standby
Solid RED
Power saving mode. ON
Pairing RX searching for unpaired TX Please Activate Registration
on Transmitter Unit
Pairing RX cannot nd new TX New WHDI source was
not found
Pairing manually pairing RX and TX Adding NAVS502/NAVS500
Waiting for Signal Link After 80 seconds, can’t es-
tablish link on any channel.
Linked Mode
No input from selected
source
Video format not recognized
Video format is recognized N/A (Audio/Video will dis-
play)