User Manual
10
FAQ
1. What does the status of the LEDs mean?
SOLID WHITE LINKED Transmitter/Receiver is linked.
FLASHING WHITE SEARCHING Transmitter/Receiver not in range.
No HDMI Input connected.
RX:SOLID ORANGE
TX:SOLID RED
STANDBY Transmitter/Receiver in power
saving mode.
2. What is the maximum transmission range?
The maximum range is 100 feet line of sight. If transmitting through walls or obstacles
the range will be reduced.
3. What steps can I take if the IR Extender is not working?
For proper IR Extender conguration please refer to the included Quick Start Guide.
To locate the IR sensor on your device, please contact the manufacturer of your HDMI
enabled product. (E.G. Cable box, Blue Ray player, DVD Player). If the issue persists
the IR Frequency can be adjusted by pressing IR on the remote control. The available
frequencies are 38 KHz, 47 KHz, and 58 KHz.
4. How do I transmit Standard Denition content?
The Aries Home/Home+ cannot transmit 480i resolution. To ensure your standard de-
nition content can be transmitted successfully, ensure your HDMI source and television
settings are set to 480p resolution.
5. The Aries Home/Home+ appears warm after prolonged use.
To transmit 3D or Full HD content wirelessly, the Aries Home/Home+ must process a
large amount of data. Due to this, the unit may run at warmer temperatures than other
electronic devices. We have designed the housing to provide proper ventilation to the
unit as well as have designed the electronic components to withstand temperatures up
to 80°C. To ensure maximum performance ensure both the Transmitter and Receiver
are placed in well ventilated areas that do not exceed 30°C.
6. What are the troubleshooting steps if no video is displayed and the Receiver shows
“Searching available channels”?The Transmitter/Receiver may require a few seconds
to connect. Ensure the correct HDMI video input is selected on your TV and that your
HDMI cables are connected properly. Check that your video resolution from the source
device is set to 1080p, 1080i, 720p, 576p, or 480p. Please ensure the Aries Home/
Home + is not located near a wireless access point as interference may affect connec-
tivity.