User guide

- 8 -
5. Connect the power adapter to the DC Input of the Receiver and into a wall outlet. When the
unit is successfully connected, the Power LED indicator on the POWER button lights up in
BLUE.
6. Once the Transmitter and Receiver are both connected, they will automatically pair to
each other.
7. During the warm-up period, the POWER LED will ash while BLUE until the signal between
the Transmitter and the Receiver is established. It will take aproximately 15 ~ 20 seconds to
boot-up and establish a link providing everything is operating normally.
8. Ensure your TV or projector is powered ON and is in"HDMI input" mode.
SETUP