User Manual

- 6 -
CONNECTING THE RECEIVER TO HDTV
1. Connect the HDMI cable to the HDMI Output of the receiver and to your HDTV television or HD
projector.
2. Connect the power adapter to the DC Input of the Receiver and into a wall outlet. When the
unit is successfully connected, the Power LED indicator on the POWER button lights up
in WHITE.
SETUP
1. Drill pilot holes using drilling template included below.
2. Insert the supplied two anchors into the wall.
3. Insert two screws into the anchors. Leave 1/8” length for mounting the Transmitter or
Receiver.
4. Remove the rubber feet from the NPCS549. Place NPCS549 main holes over the protruding
screws and slide down into position.
WALL MOUNTING
DRILLING TEMPLATE