User Manual

- 8 -
5. Connect the power adapter to the DC Input of the Receiver and into a wall outlet. When the
unit is successfully connected, the Power LED indicator on the POWER button lights up in
WHITE.
6. Once the Transmitter and Receiver are both connected, they will automatically pair to
each other.
7. During the warm-up period, the POWER LED will ash WHITE until the signal between the
Transmitter and the Receiver is established. It will take aproximately 15 ~ 20 seconds to boot-
up and establish a link providing everything is operating normally.
8. Ensure your TV or projector is powered ON and is in"HDMI input" mode.
SETUP