User Manual

9
PAIRING INSTRUCTIONS
The NPCS650 Transmitter and Receiver come paired. If re-pairing is necessary use the
below steps to reconnect the units.
Press and hold down the power button LED on the Receiver and plug in the power
adapter. Release the Power button once the power LED blinks orange.
Plug the power adapter into the Transmitter. Press and hold down the pairing button.
The Power LED should be ashing white. The white ashing speed will begin to
slow down. Once it has slowed down, release pairing button to enter pairing mode.
HDMI
Note: The Transmitter and Receiver should complete pairing and once LEDs change to
solid white connection will be complete.