Operation Manual

E
25
Attaching the Lens Strap
To prevent accidental dropping of the lens cap, always use the lens strap.
Attach the lens strap as follows:
1. Pass the end of the lens strap through the strap eyelet on
the lens cap.
2. Pass the end through the lens strap and pull.
* Attach the end on the other side of the lens strap to the
strap eyelet on the camera in the same way.
To prevent the scratch and avoid dust or stains on the lens, be sure to put on the lens cap when the camera is not in use
Choosing the Language
When you turn on the camera for the first time, the language
setting screen appears, prompting you to choose a language
for displayed information and the LCD monitor. Follow the
steps below to set the OSD (On-Screen Display) language.
1. Select a language that you prefer by using the
/ button.
2. Press the OK button to confirm.
The language setting will be retained even if the camera is turned off.
The provided languages are [ ], [ ], [ ],[ ], [ ], [ ], and [ ].