User's Manual

26
User Manual of NZC110-EXT
Click "submit". Into the newly created interface configuration page, fill in the IPv4
address which should be different with LAN segments, such as 192.168.2.35.
Figure 5-11 Router Interface – General Setup
IPv4 gateway: In general, the IPv4 gateway address and WAN IP address are in the same
network.
In general setup - the firewall settings page, select the default wan firewall-zone, after
saving the application, you will see ETH1 is set to the WAN zone, then routing mode
setup is complete, eth1 port is set for the WAN port.