APOLLO User’s manual
Thank you. Dear Valued Customers, Thank you for purchasing our product. With the booming of the gaming market and computer cases, NZXT would like to differentiate ourselves from other case companies by continuously providing innovative next generation cases. With every product, we hope to break more boundaries and limits. I hope you like our products and look for us again in your future purchases. Any comments and critiques are always welcome. Thank you again.
Apollo Specifications FEATURES: Steel built chassis Efficient and quiet cooling through two included 120mm fans Screwless design Support for Firewire, USB 2.0 and front audio ports Compatible with 5.25” LCD devices, allows viewing through Smoked acrylic Durable, front panel hinges built using aluminum die cast MOTHERBOARD COMPATIBILITY: ATX, MICRO-ATX, MINI ATX, FLEX ATX DRIVE BAYS: 5 EXTERNAL 5.25” DRIVE BAYS 1 EXTERNAL 3.5” DRIVE BAY 4 INTERNAL 3.
Before Beginning.. For safety issues, it is highly recommended that all users wear gloves during installation. Also, if you have any questions during installation, please send an email to service@nzxt.com before proceeding. Thank you. Power Supply Installation Please refer to the case interior infrastructure and secure the power supply at the back of the case by using the screws provided. NOTE: CPU, RAM and any peripheral installation are not included in this manual.
motherboard tray. ( Note: If you find that some holes are unused, this is normal, this case is made to support for many motherboard sizes ) 4. Place your motherboard on top of the brass standoffs and attach it to the tray using screws provided. LED, Power and Reset Installation Please refer first to your motherboard manual to find where your power switch and reset pins are located. The colors following each instruction designate the color of the wires. 1.
2. Refer to your motherboard manual and match the labels on the USB port connectors with your motherboard in order to install. Audio Port Installation 1. Please first refer to your motherboard manual and match the labels on the audio port connectors with your motherboard in order to install. 2. The green input is the speaker input and the pink input is the microphone input, these inputs are located at the right side of your front panel.
ASUS© Motherboard Pin Assignment 5.25” Screwless Drive Bay Installation 1. The NZXT Apollo comes with a lock on screw less drive cage design so you can easily pull out and replace drives. For the 5.25” devices, match the screw hole of your drive with the drive bay holder and make sure the device is where you want it. 2. Remove the front panel and steel plate in the designated drive bay. 3. Slide the 5.25” device into the drive bay from the front of the case. 4.
Step 2. Push towards the bottom to secure 5. After installation, the user may use screws to secure the device. Hard Drive Installation The Apollo allows space for four internal 3.5” Devices such as hard drives. Three of the four drives run on screwless slides. Please follow the instructions below: 1. Attach the slides onto the side of the device. Hard Drive Sliding into Place 2. Slide the device in place and secure. NZXT.
Front 12CM Fan Installation The Apollo allows one 120mm to be installed at the front of the case, in order to install the fan, please follow these instructions. 1. Remove the front panel by pulling from the opening at the bottom of the case. 2. Remove the left side panel by unscrewing the two thumbscrews at the rear of the case. 3. Remove the Hard Drive cage by unscrewing first the two screws to the left of the cage, and then the two screws located at the bottom of the case. ( Figure 1 & 2 ) 4.
Figure 2. Two screws located at the bottom of the case Support and Service If you have any more questions or have problems with the NZXT product you purchased, please don’t hesitate to contact service@nzxt.com along with a detailed explanation of your problem and your proof of purchase. You may inquire about replacement parts at rma@nzxt.com. Thank you again for purchasing an NZXT case. If you have any more comments or questions. Please visit our website or send us an email. NZXT Website: www.nzxt.
