User`s manual

the extra screws provided. If you find that the front panel is
touching your device, adjust the location of the steel pins on
the rail to mount the device deeper inside the case.
Pull the front panel from the opening at
the bottom to remove it.
3.5” Internal Hard drive Installation
1. The Lexa case supports up to five hard drives if the
accessory box is removed.
2. Begin the installing by removing the side panel.
3. Attach the rails onto the side of the hard drive and slide it
into the hard drive cage.
Slide the hard drive into any of the five slots available.
NZXT. 12