Sentry LX User’s manual
Thank you. Dear valued customers, Thank you for purchasing our product. We are thankful to all our fans for the continuing support, after just four years since entering the computer chassis market with the Guardian in 2003, NZXT is now an established gaming brand and manufacturer of quality hardware in the market today. Since then, we have stayed true to our goal, which was to continuously provide innovative next generation products. With every product, we are still breaking more boundaries and limits.
Sentry LX Specifications Features - Dual 5.
Setting up the Sentry LX Before installing the Sentry LX into your system, please first install the provided battery into the back of the Sentry LX. The battery stores the data and settings for the Sentry LX. Installing the Sentry LX The Sentry LX requires dual 5.25” bays, simply slide the panel in from the front of your chassis and secure the device via screw less mechanisms or screw. A 4pin power connection is needed to power the Sentry LX, be sure to make this connection before booting up your system.
1. Press the “Fan Select” button to initiate fan settings. Pushing the “Fan Select” button continuously will scroll through the connections on the meter. 2. Push the “Up and Down Arrows” to adjust the fan speed, note that doing this will set the meter into Manual mode. The fan speed range that can be adjusted is automatically detected by the fan controller. Setting a fan to 0 RPM results in turning off the fan.
3. Use the “Up and Down Arrow” to adjust the settings. 4. The Sentry LX will exit the temperature alarm setting mode at after idling or at the end of the “SET” button scroll. Changing between Fahrenheit and Celsius Hold the “Up Arrow” Button in order to chance between F and C. Sound Alarm The sound alarm will go off under the following conditions 1. when a fan is detached during operation 2.
