OWNER’S MANUAL REMOTE CONTROL MODELS: 3PAMSH30B-SZW, 3PAMSH36B-SZW
IMPORTANT NOTE: Read the manual carefully. Make sure to save this manual for future reference. Illustrations in this manual are for explanatory purposes only, your actual product may look slightly different.
TABLE OF CONTENTS REMOTE CONTROL .......................................................................................................................................... 4 HOW TO INSERT THE BATTERIES .......................................................................................................................... 5 TIPS & REGULATIONS FOR USING REMOTE CONTROL ................................................................................ 5 STORAGE AND TIPS FOR USING THE REMOTE CONTROL............
REMOTE CONTROL The remote control transmits signals to the system. TEMP + - POWER Used to adjust the set temperature and the timer, also real time. The appliance will be started when it is energized or will be stopped when it is in operation, if you press this button. NOTE: Press - and MODE at same time to toggle between °C to °F. SWING Adjust horizontal (left/right) air flow. SWING AI SMART Adjust vertical (up/down) air flow. Used to enter Artificial Intelligence Smart Running Mode.
REMOTE CONTROL HOW TO INSERT THE BATTERIES 1 2 3 Remove the battery cover according to the arrow direction. (Continued) STORAGE AND TIPS FOR USING THE REMOTE CONTROL The remote control may be stored mounted on a wall with a holder. Remote control holder fixing Insert new batteries making sure that the (+) and (-) of battery are matched correctly. Reattach the cover by sliding it back into position. Remote control mounting NOTE: Use 2 LR03 AAA (1.5volt) batteries. Do not use rechargeable batteries.
OPERATION INSTRUCTIONS OPERATION MODES TURNING ON SELECTING MODE Press Press button. Result: The RUN indicator of the indoor unit lights up. • • • button one by one Result: The operation modes changed in sequence: Changing modes during operation, sometimes the unit does not respond at once. Wait 3 minutes. During heating operation, airflow is not discharged at the beginning. After 2-5 minutes, the airflow will be discharged until temperature of indoor heat exchanger rises.
OPERATION INSTRUCTIONS (Continued) AIRFLOW DIRECTION CONTROL AI SMART MODE Vertical airflow (horizontal airflow) is automatically adjusted to a certain angle in accordance with the operation mode after turning on the unit. HOW TO SET AI SMART MODE OPERATION MODE DIRECTION OF AIRFLOW Cooling, Dry Horizontal Heating, Fan Only Downward The direction of airflow can be also adjusted to your own requirement by pressing the “ “ buttons of the remote control. button.
OPERATION INSTRUCTIONS (Continued) CLOCK BUTTON SUPER MODE 1 SUPER mode is used to start or stop fast cooling or heating, but only when the unit is on. HOW TO ADJUST THE REAL TIME 2 Press the CLOCK button for about 5 seconds. Result: The time flashes on the LCD. SUPER mode can be set when the appliance is in operation or energized. In SUPER mode, you can set temperature, airflow direction or timer. HOW TO SET SUPER MODE Press “+” and “-” buttons.
OPERATION INSTRUCTIONS TIMER MODE (Continued) 1 HOW TO SET TIMER OFF The TIMER MODE can be set to turn the system ON at a set time, then turn OFF at a set time within the same 24 hour interval. Press button. Result: “12:00 OFF” flashes on the LCD. TIMER ON and TIMER OFF functions can also be used independently. 1 HOW TO SET TIMER ON 2 Press button. Result: “12:00 ON” flashes on the LCD. 2 Hold for about 2 seconds to increase or decrease the timer in 1 hour intervals.
OPERATION INSTRUCTIONS (Continued) iFEEL MODE 8°C HEAT MODE iFEEL mode can read the current room ambient temperature by using a sensor built into the remote control. The system will automatically adjust to keep all areas of the room at the same temperature. HOW TO SET THE 8°C HEATING NOTE: iFEEL mode function works best if the remote control is placed on the opposite side of the room as the indoor unit and out of direct airflow.
OPERATION INSTRUCTIONS ECO MODE SLEEP MODE 2: In this mode, air conditioner will run the fan and compressor on lowest frequency to save energy. Press ECO button for about 3 seconds to start ECO mode. Result: The indicator appears on the display. Fan speed will be auto set to low. ECONOMY button is ineffective in SUPER and AI SMART mode. Press ON/OFF MODE, TEMP +, TEMP -, FAN SPEED, SLEEP, QUIET or ECO button to cancel ECO Mode.
5401 Dansher Road Countryside, IL 60525 844-4PA-AIRE | 844-472-2473 | support@perfectaire.us CANADA SUPPORT 877-997-2473 | supportcanada@perfectaire.us www.perfectaire.
