MSDS

INHALATION: Product does not pose a risk of injury by the inhalation route.
EYE CONTACT: Do not allow the victim to rub eyes, or to keep eyes tightly shut. Gently lift the
eyelids and flush immediately and continuously with copious amounts of water for at least 15 minutes.
Consult with a physician or ophthalmologist.
SKIN CONTACT: Product does not pose a risk of injury by the dermal route. If excessive skin contact
occurs, promptly flush the affected area thoroughly with water. If irritation persists after washing, get
medical attention.
INGESTION: Never give anything by mouth to someone who is unconscious or convulsive. If the
material is ingested, seek immediate medical attention.
FIRE FIGHTING MEASURES AND EXTINGUISHING MEDIA
This material is non-combustible and is not highly reactive under normal handling conditions.
FLASH POINT: Not combustible
FLAMMABILITY LIMITS: Not Applicable
EXTINGUISHING MEDIA: Foam, dry chemical or carbon dioxide should be used in
the event of a fire.
SPECIAL FIRE FIGHTING
PROCEDURE:
Use water to keep fire exposed containers cool, until fire
is out. Water spray may be used to flush spills away
from exposure.
UNUSUAL FIRE AND
EXPLOSION HAZARDS:
None known.
ACCIDENTAL RELEASE MEASURES
SPILL/LEAK: Use a wet cloth or mop to contain the spill and pick up material for recovery or disposal
when feasible. Do not dispose of the material in any sanitary sewer, storm sewer, sink, toilet, or floor
drain. MATERIAL WILL CAUSE SLIPPERY SURFACES.
HANDLING AND STORAGE
HANDLING: Keep container closed when not in use. Avoid contact of product with eyes.
STORAGE: Keep material stored in the original container at normal room temperature, and avoid
prolonged periods of storage at high temperatures.
EXPOSURE CONTROL AND PERSONAL PROTECTION
ENGINEERING CONTROLS: None required.