User Manual and Technical Guide The O'Neil microFlash Series of Printers By O'Neil Product Development
O’Neil Product Development, Inc. 8 Mason Irvine, CA 92618 949.458.0500 • Fax 949.458.0708 www.oneil-pdi.com Version 7.
Declaration of Conformity Application of Council Directives: 89/336/EEC, 73/23/EEC Manufacturer’s Name: O’Neil Product Development Inc.
FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
Warranty Limited Warranty The microFlash 2/3 printer is warranted by O’Neil Product Development, Inc. to the original purchaser, to be free from defects in materials and workmanship for one (1) year from the date of original purchase. The microFlash 2t/ 2tCR/ 2I/ 2iCR/ 4t/ 4tCR printer is warranted by O’Neil Product Development, Inc. to the original purchaser, to be free from defects in materials and workmanship for (1) year from the date of original purchase (OEM’s 90 days from the date of purchase).
Intellectual Property Rights TRADENAMES AND TRADEMARKS microFlash™ is a trademark of O’Neil Product Development, Inc. All other brand and product names shown in this manual are tradenames, trademarks or registered trademarks of the respective manufacturers or distributors of those products. This manual and any examples contained herein are provided ‘as is’ and are subject to change without notice. O’Neil Product Development, Inc.
Contents Introduction 1 The microFlash2 .........................................................................................................................2 The microFlash2 Parts List .........................................................................................................3 The microFlash3 .........................................................................................................................4 The microFlash3 Parts List ..............................................
Port..............................................................................................................................28 Baud Rate....................................................................................................................28 Data Bits .....................................................................................................................28 Parity...................................................................................................................
Replacement Fuse Rating...........................................................................................47 When to Replace the Battery .................................................................................................... 47 Replacing the microFlash2 Battery ............................................................................ 48 Replacing the microFlash3 Battery ............................................................................
Troubleshooting 85 Paper Loading Problems ...........................................................................................................85 Printer Not Printing...................................................................................................................85 Charging the microFlash.............................................................................................86 Programming Problems ................................................................................
Introduction 1 Congratulations on your purchase of an O’Neil microFlash printer. We appreciate your selection of the microFlash for your mobile computing needs. You have purchased the world’s first ruggedized printer to be compliant by the Infrared Data Association, a standards organization for the industry. The infrared data transceiver in each O’Neil printer allows a hand-held computer or notebook to send data to the printer, without wires, up to one meter away.
The microFlash2 Battery Casing/ End Boot Charge Indicator RJ-11 Port DC Power Jack IR Window Paper Knob Paper Release Lever Self Test Button Paper Casing/End Boot 2 • Introduction User Manual and Technical Guide The O'Neil microFlash Series of Printers
The microFlash2 Parts List Printer Part Number microFlash 2 printer (Stainless Belt Clip) 200050-000 microFlash 2 printer (Swivel Belt Clip) 200051-000 microFlash 2 printer Linerless (Stainless Belt Clip) 200052-000 microFlash 2 printer Linerless (Swivel Belt Clip) 200053-000 Cables Part Number Data Cable -DB9F -7’ (non-coiled) 210147-000 Data Cable -DB9F- (coiled) 210050-000 HHP Microwand Cable –DB9M 210050-001 Symbol 3300 DB25M Cable 210050-002 Telxon DB25M Cable 210050-005 Teklogix
The microFlash3 Battery Casing/ End Boot DC Power Jack Charge Indicator (Under boot) Paper Knob Paper Release Lever IR Window Self Test Button RJ-11 Port Paper Casing/End Boot 4 • Introduction User Manual and Technical Guide The O'Neil microFlash Series of Printers
The microFlash3 Parts List Printer Part Number microFlash 3 printer (Stainless Belt Clip) 200060-000 microFlash 3 printer (Swivel Belt Clip) 200061-000 microFlash 3 printer Linerless (Stainless Belt Clip) 200062-000 microFlash 3 printer Linerless (Swivel Belt Clip) 200063-000 Cables Part Number Data Cable -DB9F -7’ (non-coiled) 210147-000 Data Cable -DB9F- (coiled) 210050-000 HHP Microwand Cable –DB9M 210050-001 Symbol 3300 DB25M Cable 210050-002 Telxon DB25M Cable 210050-005 Teklogix
The microFlash2t Latch Tear Bar Charge Indicator Battery Self Test/ Feed Button Paper ReleaseLever DC Power Jack IR Window Paper RJ-11 Port 6 • Introduction User Manual and Technical Guide The O'Neil microFlash Series of Printers
The microFlash2t Parts List Printer Part Number microFlash2t printer (Stainless Belt Clip) 200070-001 microFlash2t printer (Swivel Belt Clip) 220071-001 microFlash2t printer, Linerless (Stainless Belt Clip) 200072-001 microFlash2t printer, Linerless (Swivel Belt Clip) 220073-001 Cables Part Number Data Cable -DB9F- (RJ11 R/A, coiled) 210164-000 RJ11 Adapter Cable – Right Angle (Allows the 2t to use MF2/3 cables) 210158-000 Power Adapters Part Number AC Power Adapter (110 volt) 490008-003
The microFlash2tCR Latch Card Reader Tear Bar Charge Indicator Battery Self Test/ Feed Button Paper ReleaseLever DC Power Jack IR Window Paper RJ-11 Port 8 • Introduction User Manual and Technical Guide The O'Neil microFlash Series of Printers
The microFlash2tCR Parts List Printer Part Number microFlash2tCR printer, Mag Stripe Reader (Stainless Belt Clip) 200092-000 microFlash2tCR printer, Mag Stripe Reader (Swivel Belt Clip) 220093-000 microFlash2tCR printer, Linerless , Mag Stripe Reader (Stainless Belt Clip) 200094-000 microFlash2tCR printer, Linerless, Mag Stripe Reader (Swivel Belt Clip) 220095-000 microFlash2tCR printer, Mag Stripe/Smart Card Reader (Stainless Belt Clip) 200096-000 microFlash2tCR printer, Mag Stripe/Smart Card R
The microFlash2i Latch Tear Bar Charge Indicator Battery Self Test/ Feed Button DC Power Jack Paper 10 • Introduction IR Window RJ-11 Port User Manual and Technical Guide The O'Neil microFlash Series of Printers
The microFlash2i Parts List Printer Part Number microFlash2i printer (Stainless Belt Clip) 200075-001 microFlash2i printer (Swivel Belt Clip) 200076-001 Cables Part Number Data Cable -DB9F- (RJ11 R/A, coiled) 210164-000 RJ11 Adapter Cable – Right Angle (Allows the 2t to use MF2/3 cables) 210158-000 Power Adapters Part Number AC Power Adapter (110 Volt) 490008-003 AC Power Adapter (220 Volt) 490017-000 Cigarette Lighter Adapter, Right Angle, 5 Amp.
The microFlash2iCR Latch Card Reader Tear Bar Charge Indicator Battery Self Test/ Feed Button IR Window DC Power Jack Paper RJ-11 Port 12 • Introduction User Manual and Technical Guide The O'Neil microFlash Series of Printers
The microFlash2iCR Parts List Printer Part Number microFlash2iCR printer, Mag Stripe Reader (Stainless Belt Clip) 200110-000 microFlash2iCR printer, Mag Stripe Reader (Swivel Belt Clip) 220111-000 microFlash2iCR printer, Mag Stripe/Smart Card Reader (Stainless Belt Clip) 200112-000 MicroFlash2iCR printer, Mag Stripe/Smart Card Reader (Swivel Belt Clip) 220113-000 Cables Part Number Data Cable -DB9F- (RJ11 R/A, coiled) 210164-000 RJ11 Adapter Cable – Right Angle (Allows the 2iCR to use MF2/3 ca
The microFlash4t Latch Tear Bar Battery2 Self Test/ Feed Button Charge Indicator Battery1 RJ-11 Port Paper IR Window DC Power Jack 14 • Introduction User Manual and Technical Guide The O'Neil microFlash Series of Printers
The microFlash4t Parts List Printer Part Number microFlash4t printer (Stainless Belt Clip) 200114-000 microFlash4t printer (Swivel Belt Clip) 220115-000 Cables Part Number Data Cable -DB9F- (RJ11 R/A, coiled) 210164-000 RJ11 Adapter Cable – Right Angle (Allows the MF4t to use MF2/3 cables) 210158-000 Power Adapters Part Number AC Power Adapter (110 volt) 490008-003 AC Power Adapter (220 volt) 490017-000 Cigarette Lighter Adapter, Right Angle, 5 Amp.
The microFlash4tCR Card Reader Latch Tear Bar Battery2 Self Test/ Feed Button Charge Indicator Battery1 RJ-11 Port Paper IR Window DC Power Jack 16 • Introduction User Manual and Technical Guide The O'Neil microFlash Series of Printers
The microFlash4tCR Parts List Printer Part Number microFlash4tCR printer, Mag Stripe Reader (Stainless Belt Clip) 200116-000 microFlash4tCR printer, Mag Stipe Reader (Swivel Belt Clip) 220117-000 microFlash4tCR printer, Mag Stripe/Smart Card Reader (Stainless Belt Clip) 200118-000 microFlash4tCR printer, Mag Stipe/Smart Card Reader (Swivel Belt Clip) 220119-000 Cables Part Number Data Cable -DB9F- (RJ11 R/A, coiled) 210164-000 RJ11 Adapter Cable – Right Angle (Allows the MF4tCR to use MF2/3 ca
Features and Benefits Features Benefits Compact Design The microFlash series of printers are rugged and light enough to be worn all day on a worker’s belt. Infrared Technology Wireless capabilities allow data to be sent to the printer without cables. Power Efficiency Easily outlasts a typical 8-hour shift on a single charge. The microFlash2 recharges in one hour, the microFlash3 in four hours. The microFlash 2t/2tcr/2i/2icr charge in about 6-9 hours. The microFlash 4/4tcr charges in about 3 hours.
Quick Demo 2 This chapter gives you quick setup instructions to get your microFlash series of printers up and running. The demo program provided allows your PC or hand-held computer to simulate a typical interchange between a hand-held computer and a receipt printer out in the field. Wake Up The self test button allows you to manually wake up the microFlash from its sleep mode and to print self tests. To wake up the printer, press the red self test button.
Using the Demo Program with Windows 3.1 To run the demo, connect your personal computer to your microFlash using your microFlash download cable. Now open the Program Manager in Windows. Click on “Main” and then click on “Print Manager.” From the Options Menu, choose Printer Setup. Select the Generic/Text Only printer. Then click on “Connect” to select the COM Port that you have the microFlash connected to (confirm that the COM Port is set to N81). Choose “Set as Default Printer.
Wireless Printing To run the demo wirelessly, see Chapter 3, microFlash Configuration Program, to set up infrared communication.
Self Test Push the red button and hold four seconds to print a self test. Below is an explanation of the print-out. Self Test Description Page F/W Ver Internal software version Page 104 Timeout The seconds between printing and sleep mode. Page 29 Baud Rate The speed at which the microFlash receives data. Page 27, 28 Parity Odd, Even or None. Page 27, 28 Data Bits Matches that of computer sending data to microFlash. Page 27, 28 Handshake The way the printer handles flow control from host.
microFlash Configuration 3 The microFlash Configuration Program disk included with the microFlash series of printers allows you to configure your printer to any environment. Use the Configuration Program to prepare your printer to print a variety of fonts and graphics, to select the paper, to communicate wirelessly, and so on. Setup configurations chosen here can be saved under different file names for different applications. Windows 3.
Windows 95 Installation Insert the microFlash configuration software in a floppy drive. Next, click on the Start button, point to Settings, and click Control Panel. Double-click on Add/Remove Programs. Follow the instructions on the screen. Flash Configuration For both Windows 3.1 and Windows 95 users, the microFlash configuration icon, titled Flash Configuration will appear on the screen. Click on the Flash Configuration icon. You will be prompted to choose a printer.
Buttons and Pull-Down Menus In the screen below you can see one pull-down menu and several of the buttons representing the various functions of the microFlash Configuration Program. You can either click on a button to activate that function or use its pull-down menu. To use a pull-down menu, click on one of the key words at the top of the screen. For example, click on “Configure” to pull down the Configure Menu, which has the options shown below.
Buttons displayed at the top of your screen. Save Configuration Will save the configuration parameters to the default file. Communication Parameters Will select the COM Port and other parameters. Printer Options Allows you to change the beeper and time out configuration. Paper Options Allows you to determine the darkness of the print and the number of sheets of paper you use. Infrared Parameters Allows you to choose the type of infrared link you want. Fonts Available fonts.
Save Configuration Save Configuration allows you to save the current configuration that you will be sending to the microFlash. Each time you open the microFlash Configuration software, the program will open with the last saved configuration. The default file name will be DEFAULT.MFL. You can also save configurations under other file names, but you must use the MFL extension. To save your changes to the default file, press the Save button or select Save from the File menu.
Port Select the port on your computer that the microFlash is connected to. If you have more than one free port, you can download to more than one microFlash at a time by opening the program twice, and having each program send to different COM-Ports. To select a port, click on the arrow to the right of the field to display your choices, and choose one by clicking on it. ! This port setting is not related to the port setting you use when you communicate with a hand-held computer to print receipts.
Beeper & Timeout Options Printer options include turning the beeper On and Off and setting the Time Out function. You may access Printer options by clicking on this button, or by choosing it under the Configure menu at the top of the window. The following dialog will appear: Beeper When the beeper is turned on, it will sound when you press the printer’s red button and any time the printer wakes up from the sleep mode. In some instances, a beeping noise may be disturbing to you or to those around you.
Paper Options Paper Options allows you to set the printer to match the type of paper you are using. Click on the Paper Roll button, or from the Configure menu, choose Paper Options. The following dialog will appear: Darkness The Darkness function sets the heat sensitivity for the type of paper you are using, and for high and low ambient temperatures (which may affect the temperature of the print mechanism in the microFlash, causing the print quality to change.
Infrared Parameters Infrared Parameter allow you to choose the type of infrared link you want. Click on the arrow next to “Protocol” to display your options. For example, choose IrDA (the standard established by the Infrared Data Association) for wireless printing, unless you are using a product that requires ASK (Amplitude Shift-Keying). Choose “Direct” if you always connect your hand-held computer to your printer with a cable.
Fonts Standard Fonts Fonts allow you to choose from the list of available fonts. The permanent fonts are known as “resident” fonts” and cannot be removed. For a list of resident fonts, press the red self-test button on your printer and look for the “R” next to the font. The other fonts, labeled “D” on your test print out, are “downloaded” fonts, i.e. they have already been added for you (See picture below.) You can add to this list or remove fonts from it.
Asian Fonts When you add an Asian font, you must add an additional font (K-ASC) to make the download complete. Example1: If you add the font “ASN-A” you must add “K-ASC” after. Example2: If you add the font”ASN-B” you must add “K-ASC” after. Example2: If you add the font”SHJIS” you must add “K-ASC” after.
Graphics Use this button to download graphic images from your PC to your microFlash. The system checks the specifications of the graphic to ensure that it matches the criteria required by the microFlash. All graphic files must be in a .PCX format and be saved according to specific criteria. This criteria is listed in the Graphic PCX Formats section below. When you press the Graphics Selection button, the following window will appear: Adding PCX Files To add .
Remove a PCX File To remove a .PCX file from your download list, simply highlight the file name and press the Remove button. The PCX file will be removed from the list. It will not be removed from your O’Neil directory. Thus, it can be added back at a later time. Graphic PCX Formats Graphic images are accepted in a standard .PCX format. PCX files for Graphic download must be: 1. Version 0.0, 3.0 or 5.0. 2 Generated for 203 dpi resolution. 3. Saved in a black and white format.
Transmit Transmit allows you to send the current configuration to the printer. Be sure you have connected your download cable to the COM port specified in your setup. Then click on this button. This will not update your firmware. See “Updating the microFlash” at the end of this chapter to update firmware. There will be a pause, then the printer will beep (provided the beeper is turned on). The computer will then download the configuration information to the microFlash.
Pull Down Menus Most of the pull-down menus are self-explanatory. Click on each word with an underlined letter at the top of your screen to explore. Here are some important details regarding a few of the key pull-down menus. File Menu Click on the word “File” to access your File menu. The following screen will appear: File Menu Choices New: To create a new configuration. Open: To open an existing configuration. Save: To save the current configuration.
Configure Menu Click on the word “Configure” at the top of your screen to access the Configuration menu. The following screen will appear: Configure Menu Choices Communication Parameters: Choose parameters. 38 • microFlash Configuration Printer Options: Choose beeper and time-out options. Paper Options: Choose paper options. Infrared: Choose infrared options. Fonts: Choose fonts. Graphics: Choose graphics. Negotiation Parameters: Set the maximum baud rate during download.
Transmit Menu Click on the word “Transmit” at the top of your screen to access the Transmit Menu. The following screen will appear: Whether you click on the Transmit button or use the Transmit pull-down menu, Transmit allows you to send to the correct configuration. Using your pull-down menu, you can also update the printer. Transmit Menu Choices Configuration: Send current configuration to printer. Update Firmware: Install new firmware, updating the microFlash.
Updating the microFlash Using the Transmit pull-down menu, click on Update firmware when a new version of the microFlash has been developed. Update firmware allows you to add enhancements as they are developed without ever having to purchase a new printer. It will also update the new configuration you choose before you click on Update. Call your O’Neil representative (949) 458-0500 to find out more about future developments.
Paper Loading 4 The microFlash series of printers are thermal direct printers requiring thermal paper. Out of Paper The printer will sound two quick beeps when it runs out of paper (MF2/3/2t/2tCR/4t/4tCR). If the printer is out of paper, (or the paper release lever is up), the printer will suspend operation until the paper is present and the lever is down. The printer will continue to communicate with the hand held as long as it does not “time out.
Removing Paper Core For the MF2/3 remove the round end boot of the printer by tucking the tips of your fingers under the edge of the boot and pulling it off with a peeling motion. Wrap your index finger around the wider end of the paper rod and pull up. The paper rod will snap out. Remove the empty paper core and discard. (Save the plastic rod) For the MF2t/2tCR/2i/2iCR/4t/4tCR Un-snap the latch and lift up the cover. Wrap your index finger around the empty paper core and pull up.
through the center of the paper roll. Place the narrow end of the rod into the small hole on the side of the paper cavity. Snap the wider end into the cutout on the opposite side of the paper cavity. Turn the paper knob clockwise to tighten the paper slack in the cavity. Replace the end boot and tear off extra paper. Automatic Paper Loading MF2t/2tcr/2I/2icr/4t/4tcr With the loose, clean edge of the paper coming from the bottom of the roll, insert the edge of the paper between the roller and the platen.
44 • User Manual and Technical Guide The O'Neil microFlash Series of Printers
Batteries 5 The microFlash2 will run using an internal Ni-Cad battery pack. The microFlash3 printer will run using an internal Nickel Metal Hydride battery (DR30). The microFlash 2t//2tCR/2i/2iCR printer will run using an internal Nickel Metal Hydride (DR10). The microFlash 4/4tcr printer uses 1 or 2 Lithium-ion battery packs. The microFlash series of printers can be charged on the road, with a cigarette lighter adapter or at home or the office with an AC adapter.
microFlash3 Battery Power To determine the current charge on the battery pack, you can print out a self test by pressing and holding the red self-test button on the side of the printer for four seconds. If the battery is good, you will see the word “GOOD” next to the Battery voltage print out. The microFlash3 printer has a built in low battery detector. When your printer's battery voltage is low, the printer will beep three times, indicating a Low Battery Warning.
charging. When it is fully charged, the light will glow green. (Note: microFlash 3 users will need to slide back the round rubber boot to reveal the charge light and DC jack and microFlash 2t/2tcr/2i/2icr/4t/4tcr printers need to open the cover to insert plug). Tip: The microFlash series of printers can be used while it’s plugged in and the batteries are charging.
charge is diminished. If you notice diminished results in printing time, it is time to replace the battery. Replacing the microFlash2 Battery Remove the square end boot of the printer (the side with the logo on it) by tucking the tips of your fingers under the edge of the boot and pulling it off with a peeling motion. Press down on the clip to detach the battery connector from the printer. Push on the opposite side of the old battery to slide it through the opening.
Custom Receipts and Labels 6 This chapter is designed to be used by programmers, software engineers, and technicians. It assumes a basic knowledge of computer programming. The microFlash series of printers can operate in Line Printer Mode or Easy Print Mode. Both modes are used to print receipts, labels, tickets and reports. The mode you choose will depend on the sophistication of your receipt and label requirements, and on a variety of other factors discussed below.
Line Printer Mode Line Printer Mode allows you to create simple receipts and labels which may include signatures and graphics. The table below details the host commands available when the printer is in this mode. Command ESC C n Description Set form length.
Sample Receipt in Line Printer Mode Example 1: Command Strings for Text 1) 2) Åw” RECEIPT 3) Åw! 4) Item #1 - yellow version $1.00 5) Item #2 - blue version $1.00 6) Item #3 - red version $1.00 7) Åw” 8) TOTAL: $3.00 9) ÅEZ Explanation of Command Strings Line 1-2: The “Å“ character is what the ESC character looks like on your screen. Lines 1-2 print “RECEIPT” in 7.2 cpi font using Åw” sequence. Line 3-6: Print Item #1 - #3 information in a 20.4 cpi font using Åw! sequence.
Escape Sequences ESC C n Set Form Length Format: ESC C n Dec: 27 67 n Hex: 1B 43 n Function: Sets the page length in character lines. In the command format, “n” represents the number of lines in the form and “n” is a single byte. The default for “n” is 20 decimal, 14 hexadecimal. The range for “n” is 1 - 255. ESC A n Set Interline Spacing Format: ESC A n Dec: 27 65 n Hex: 1B 41 n Function: Sets the number of blank dot lines that are fed between character lines.
ESC V n1 n2 Bit-Mapped Graphics Format: ESC V n1n2 Dec: 27 86 n1n2 Hex: 1B 56 n1n2 Function: Prints the next (n1*256 + n2) dotlines as bit-mapped graphics. “n1n2” form a 16-bit binary number set, most significant byte first. Used to print user-generated bit map graphics across the width of the print head. After receipt of this command, the printer will dump the binary data supplied directly to the print head.
ESC B, ESC E Accept Compressed Graphics Format: ESC B Format ESC E Dec: 27 66 Dec: 27 69 Hex: 1B 42 Hex 1B 45 Function: Accepts compressed graphics data. Then it will uncompress and print. Each compressed dotline (using a run-length encoding scheme) is preceded by an uppercase “G.” Each uncompressed dotline is preceded by an upper case “U.
FF Form Feed Format: FF Dec: 12 Hex: 0C Function: Will print the current line being formed, then advance the paper to top of form. LF Line Feed Format: LF Dec: 10 Hex: 0A Function: Line feed will cause the line to print and the paper to advance. CR Carriage Return Format: CR Dec: 13 Hex: 0D Function: Like a line feed (see above), the carriage return command will cause the line to print and the paper to advance.
Line Printer Mode Fonts Name Font ASCII Hex Dec Dots Wide Dots High MF055 5.5 # 23 35 37 39 96 chars large block MF072 7.2 ” 22 34 28 31 96 chars large block MF102 10.2 (space) 20 32 20 26 223 chars medium block bold MF107 10.7 & 26 38 19 26 96 chars block bold MF185 18.5 $ 24 36 11 24 96 chars block normal MF204 20.4 ! 21 33 10 24 224 chars block normal MF226 22.6 % 25 37 9 24 97 chars small block Description microFash 2i Only IM5X7 22.
ESC Hn Heighten Font “n” Times Format: ESC H n Dec: 27 72 n Hex: 1B 48 n Function: Multiply height of font by “n.” Must apply to entire line. ESC Q n1n2 Advance “n1n2” From “Q” Mark Format: ESC Q n1 n2 Dec: 27 81 n Hex: 1B 51 n Function: Advance the paper “n1n2” dotlines from “Q” Mark. For more on the “Q” mark, see Chapter 9.
Easy Print Mode Easy Print is the easiest of all possible modes of printing. It uses “English-like” commands. You can go to Easy Print from Line Printer Mode by entering an ESC EZ. Easy Print Mode allows you to design a custom receipt, ticket or report with borders, lines, stored graphics, logos, bar codes and text in any arrangement or rotation to suit your needs. Unlike Line Printer Mode, Easy Print allows you to use stored graphics. Thus, anything you print will be printed lightning fast.
Print Command Format Command After the left bracket, command, global options and colon, the command string consists of a series of identically formed lines all of which have this format: @row, column, Name, Field Options|print data|} Vertical bars surround the data. Colons surround the row and column information.
Quick Reference for Easy Print Commands Commmand Ahead Page 64 Back Page 64 LP Page 64 Print Page 58 Print Request “Global Options” Page 65 Print Request “Information” :row, column: Page 65 Page 65 Name of what is printed (Font, Bar Code, Line, Graphic) Page 69-72 Field Options used to heighten or widen image Page 70 Print Data (the bar code, graphic or text) TP Self Test Printout Query Class of Commands Page 65-66 Page 65 Page 101 60 • Custom Receipts and Labels User Manual and Technica
Easy Print Example 1 Example 1: Text with Field Options 1) ÅEZ 2) {PRINT: 3) @10,30:MF226,HMULT2,VMULT2|Total:$13.15| 4) @60,30:MF226,HMULT2,VMULT2|01-01-97| 5) } Explanation of Command Strings Line 1: Set to Easy Print Mode. The “Å“ is how the ESC character looks on the screen. Line 2: Left bracket and “PRINT” begins print request. Line 3: Print “Total $13.15” in a 22.6 cpi font that has been vertically and horizontally multiplied to twice its normal size.
Easy Print Example 2 Text and Bar Code with Field Options 1) ÅEZ 2) {PRINT: 3) @10,30:MF226|Item #1 yellow $10.00| 4) @40,30:MF226|Item #2 blue $3.15| 5) @100,30:BC39N,HIGH 20,WIDE 2|$13.15| 6) @150,30:MF107|TOTAL $13.15|remarks 7) } 8) {AHEAD:200} Explanation of Command Strings Line 1: Set to Easy Print Mode. The “Å“ is how the ESC character looks on your screen. Line 2: Left bracket and “PRINT” begins print request.
Easy Print Command Section The rest of this chapter gives you the specifics of each Easy Print command. Each Easy Print command has a unique format and function. All but the “Query” class of commands can be explained in 1-7 pages. Detailed information on the “Query” class can be found in Appendix B, Chapter 10. The “n”s are ASCII numbers, not binary (see indvidual commands) {Ahead:nnn} Ahead Command Format { AHEAD:nnn} { A left bracket begins the command set.
LP } “LP” puts printer in Line Printer Mode. The command is enclosed in left and right brackets. A right bracket ends the command set. {TP} Self Test Printout { TP} { A left bracket begins the command set. TP “TP” commands a self test print out. } A right bracket ends the command set.
{Print,Global options:@row,column:Name,Field Options|data|} Print Command Format The general format for the Print Command (shown below) includes all possible printer actions to stop the paper or rotate the image, all possible print images, and all possible options used to alter those images. { Print, Global Options:@row,column:Name,Field Options|data|} { A left bracket begins each command set. PRINT, A comma follows the PRINT command only if there are one or more “global options.
Print, Global options:@row,column:Name,Field Options|data|} Global Options BACKnnn Back Global Option Format: BACKnnn Function: Functions the same way as the BACK command. Backs the paper up “nnn” dotlines before beginning to print. Example: {PRINT,BACK50:@10,30:MF107|Hi world| } QUANTITYnnn (1 < nnn < 200) Quantity Global Option Format: QUANTITYnnn Function: Quantity allows you to specify how many copies of a label or receipt you wish to print.
{Print, Global options:@row,column:Name,Field Options|data|} Global Options continued QSTOPnnn Qstop Global Option Format: QSTOPnnn (1 < nnn < 65000) Function: Stop nnn dot lines after sensing “Q” mark. After the mark has been found, the paper advances for “nnn” dot lines and stops (even if the image is not yet complete.) If, however, there is no “Q” mark on the paper, the printer continues its search. See also the “STOP” option for use as a safeguard.
STOP nnn Stop Global Option Format: STOP nnn ( 1 < nnn < 65000) Function: Use the STOP option to advance the paper to the proper point for tearing. This options stops the paper “nnn” dotlines after the beginning of the label or receipt. The data “nnn” sent after the STOP option specifies the total number of dot lines high for this print image. For example, for the microFlash series, which have a 203 DPI mechanism, specifying “STOP 500” will give a 2.
{Print, Global options:@row,column: Name,Field Options|data|} Font Names To print text, you must specify the name of the font for the text to be printed. Each font has a fivecharacter name. This is only a partial list. For the entire list of available fonts, see Appendix C, Chapter 11, or call your O’Neil representative (949) 458-0500 for the latest font update. See Chapter 3 to download fonts. Font Name Default FontÎ CPI Description MF055 5.
{Print, Global options:@row,column: Name,Field Options|data|} Bar Code Names Name Description Requirements for Data BC39N Code 39 2:1 ratio Can use these characters in the data field: Space $ % + . / 0-9 A - Z Auto inserts leading and trailing “*” BC39W Code 39 3: 1 ratio Can use same characters as above COBAR Codabar 0-9 - $ : / . + a b c d, user must send leading and trailing guard bar a-d I2of5 Int. 2 of 5 2.5:1 ratio 0-9 (digits only, must be even.
Notes on the use of PDF-417 1. 2. 1. 2. 3. 4. 1. 2. 3. 4. Use PDF-417 the same as any other bar code: After entering Easy Print using ESC+EZ, select the barcode using the name “PD417” Enter data between two ‘|’. If the data is long, DO NOT put CR/LF in data unless you want the CR/LF to be in the bar code PDF-417 has several field parameters that may be specified: COLUMNS will specify the number of columns of DATA printed in each row of the bar code.
{Print,Global Options1:@row,column: Name,Field Options|Data|} Graphic Names Function: Print a stored graphic, e.g. stored under the name “alogo.” Example 1: {PRINT: @10,30:ALOGO|} Example 2: {PRINT:@10,30:ALOGO,HMULT2, VMULT2|} Explanation: Example 1 prints whatever logo has been stored under the five-character name, “ALOGO.” (See Chapter 3 on how to use the “Graphics” button in the microFlash Configuration Program to store a graphic automatically.
{Print,Global Options1:@row,column: Name,Field Options|Data|} Line Names Format 1: Hline, length nnn, thick n Format 2 Vline, length nnn, thick n Function: Horizontal and vertical lines can be drawn around text or graphics. Example 1: {PRINT: @60,30:HLINE, length 200, thick 2|} Example 2: {PRINT:@60,30:VLINE, length 50, thick2|} Explanation: Example 1 prints a horizontal line 200 dotlines long, and two dotlines thick. Example 2 prints a vertical line 50 dotlines long, and 2 dotlines thick.
74 • User Manual and Technical Guide The O'Neil microFlash Series of Printers
CardReader Commands Operational Commands 7 All operational commands for the magnetic/smart card reader peripheral are IMMEDIATE commands, taking the form of Easy Print commands (bracketed by “{“ and “}”) and preceded by the ESC (1Bh) character. Responses vary by command.
Command: {RG:data} Command: {RR:data} RG/RR data: B:0/1 for button currently connected to reader G:0/1/F for Green Led off or on or flashing R:0/1/F for Red Led off or on or flashing Example Response – no button reader {RS!P:0;S:1;G:F;R:0}indicating ICC power off, card is seated and green led is flashing Example Response – with button reader {RS!P:0;S:0;B:1;G:0;R:0} indicating ICC and LEDs off, no card seated, button in contact Controls Green Led – requires 1 data byte Response: {RG!} if the command was
Magnetic Card Operational Commands The magnetic card reader is always operating in the background if it is enabled. Magnetic card data is read when the card is inserted, removed, or both (default is read on removal only). That data read is stored in the printer until the data is zeroed or the printer falls asleep. Temporary flash configuration override commands are valid only until changed by another command or the printer falls asleep.
Magnetic Card Configuration Commands The magnetic card reader is capable of reading Tracks I, II, and III. Not all applications use all tracks, so to avoid bad reads being reported you should enable only the tracks you expect data to read for data. In addition, the reader can read data when the card is inserted, removed or in both directions. Finally, the card reader can be globally enabled or disabled.
Smart Card Operational Commands Since Smart Card applications and card types can vary widely, the printer acts only as a conduit to the card, relaying commands to the card and accepting data back from the card. Most cards require special commands of their own. The commands shown here are commands to the reader, not to the card.
Smart Card Configuration Commands The smart card reader can be enabled and disabled. The reader can support smart Asynchronous (T=0 and T=1/future) and Synchronous (future) smart cards, microprocessor based cards as well as memory cards (future). But it must be configured for the type of card that is to be used.
inserted, or the probe is touched to a button. The button is read automatically whenever the printer is awake and the button is sensed by touching with the probe. The magnetic card is read when the printer is awake and the card is moving. This data is stored in an internal buffer in the printer and available to the host via RS-232 or IrDA.
Smart Card Reader Smart cards vary widely (some are microprocessor based, some are memory only; all may have security). In addition, memory cards have data organization and microprocessor-based cards have a file structure that is defined by the application. Most smart card operating systems (inside the smart card) do not provide a method of “reading the directory (file structure)”. The file structure and security features are unique to the application.
Cleaning Your Printer Preventative Maintenance 8 The microFlash series of printers require little maintenance. They were designed to be rugged and attractive without constant attention. However, with continued use, the printer will collect dirt and residue and require some cleaning. Cleaning the Interior Dirt, adhesive and residue will collect on the print head of the microFlash and need to be removed.
Warning! Do not attempt to clean the internal areas of the printer in any other way than that described above! This could result in damage to the print head and void your warranty Cleaning the Exterior When the outside of your microFlash needs cleaning, use a soft cloth and mild cleanser if necessary. Do not use abrasive cleanser, chemicals or scrubbing pads, as your printer’s finish could become marked.
Troubleshooting Paper Loading Problems 9 If the paper feed mechanism does not feed correctly on the first part of a new paper roll, remove two to three feet of paper from the outside of the roll. The length of paper rolls can vary by as much as five feet, making the roll too thick in diameter for the printer to accommodate.
Charging the microFlash Using an AC Adapter If the printer does not respond when it is connected to an AC adapter, there could be a problem with the adapter or with the wall outlet. Using a Cigarette Lighter Adapter If the printer does not respond when it is connected to a cigarette lighter adapter, it is possible that the fuse may be blown. To check, remove the cigarette lighter adapter from all power supplies and unscrew the cover over the pin. Pull out the fuse.
Easy Print Command Format You must follow the exact format for Easy Print commands: {Command, Global Options:@row,col:Name,Field Options|data|} If anything is wrong in the Easy Print request, the image will not print 1) Be sure you use the correct names for Global and Field options (e.g. “QSTOPn” or “WIDEn” where “n” is a number in the proper range). A typo in the global or field option (e.g. “VNULT” instead of “VMULT”) will cause the command to be ignored.
Print Quality Problems Print Roller Appears Dirty Use the cleaning method described on in Chapter 7, Cleaning Your Printer. Attempts to clean the printer by other methods could result in costly damage to the print head. Linerless Labels Linerless label printing can cause the print head to become sticky. Use the cleaning method described on in Chapter 7, Cleaning Your Printer. Attempts to clean the printer by other methods could result in costly damage to the print head.
Appendix A: Specifications 10 Printer Specifications The following table details the size, weight and other specifications for the microFlash series of printers Specs microFlash 2 microFlash 3 Dimension 3.75 x 6.25 x 2.25 inches 95mm x 159mm x 57mm 4 x 7 x 2.1 inches 102mm x 178mm x 53mm Weight Print Method Print Medium Paper Width Print Speed Print Width Print Duration Operating Interface Characters Protocol 23 ounces (651 grams) Direct thermal Thermal paper, linerless 2.
Specs microFlash 2t microFlash 2tcr Dimension 4.625 x 7.125 x 1.75 inches 118mm x 181mm x 44mm 23.3 ounces (660 grams) Direct thermal Thermal paper, linerless 2.26 inches, 58 mm 2 inches per second 1.85 inches, 47 mm, 384 dots across More than 6,000 inches per charge -25 to +50 degrees Celsius RS232C, infrared, IrDA, ASK Full IBM and internat’l char sets Easy Print Protocol for Bar Codes, Stored Graphics, Rotated Fonts.
Specs microFlash 4t microFlash 4tcr Dimension 6.56 x 6.81 x 2.6 inches 172mm x 167mm x 66mm 20.3 ounces (575 grams) Direct thermal Thermal paper, linerless 4.40 inches, 112 mm 2 inches per second 4.09 inches, 104 mm, 832 dots across More than 2200 inches per charge using a single battery. More than 4900 inches with two batteries. -15 to +50 degrees Celsius RS232C, infrared, IrDA, ASK Full IBM and internat’l char sets Easy Print Protocol for Bar Codes, Stored Graphics, Rotated Fonts. 6.56 x 6.81 x 3.
Battery Specifications Specs microFlash 2 microFlash 3 microFlash 2t/2tcr/2i/2icr microFlash 4t/4cr Cell Size 5 X AA 6 X 4/3A 5 X 4/3A 2 X 4/3A Type Ni-Cad DR30 NMH DR10 NMH LIP260 LI-ION Nom. Voltage 6.0 V 7.2 V 6.0 V 7.2 V Rated Capacity .85 Ah 3.5 Ah 1.8 Ah 1.35 Ah Operating Temp. -20° – 50°C (-4° – 122°F) -20° – 50°C (-4° – 122°F) -20° – 50°C (-4° – 122°F) -20° – 50°C (-4° – 122°F) Weight 4.5 ounces (127 g) 12.5 oz (354 g) 6.6 oz (187 g) 3.
Cable Specifications The microFlash uses an RJ-11 six position, six conductor modular jack. The printer cable is specially designed to provide strain relief.
Thermal Paper Specifications Specs microFlash 2 microFlash 3 microFlash 2t/2tcr microFlash 2i/2icr microFlash 4t/4tcr Paper Width 2.26 inches 3.15 inches 2.26 inches 2.26 inches 4.40 inches Roll Diameter 1.75 inches 2 inches 2 inches 2 inches 2.25 inches Core Size actual core .4 inches .4 inches .4 inches .4 inches .4 inches Core Size OD .625 inches .625 inches .625 inches .625 inches .625 inches Paper Thickness .002 inches .002 inches .002 inches .005 inches .
Guidelines for Using a “Q” Mark to Align Forms (microFlash2/3/2t/4t) 1) The “Q” mark must be of a high carbon content black to assure sensing. If the “Q” mark is not high carbon content (McBeth >1.3 on a scale of 0-2), it can still look very black to the human eye, but not be sensed by the controller. 2) The “Q” mark must be printed on the thermally sensitive side on the paper.
Parking Ticket Showing “Q” Mark Area for microFlash2 .4” No Qmark .5” The Qmark can go anywhere between the dotted lines except the .5” region shown above. The recommended location is shown below. The height of the Qmark can be between .15 and .25” .15-.25” .65” 1.
Parking Ticket Showing “Q” Mark Area for microFlash3 .4” .5” No Qmark The Qmark can go anywhere between the dotted line and the edge of the paper except in the .5” region shown above. The recommended location is shown below. The height of the Qmark can be between .15 and .25” .15-.25” .
Parking Ticket Showing “Q” Mark Area for microFlash 2t/2tcr .5” No Qmark .5” The Qmark can go anywhere between the dotted lines except the .5” region shown above. The recommended location is shown below. The height of the Qmark can be between .15 and .25” .15-.25” .37” .
Parking Ticket Showing “Q” Mark Area for microFlash 4t/4tcr .3” No Qmark .5” The Qmark can go anywhere between the dotted line and the edge of the paper except in the .5” region shown above. The recommended location is shown below. The height of the Qmark can be between .15 and .25” .15-.25” .
Wake-Up Characters The microFlash automatically goes into sleep mode in the number of seconds you specified using your microFlash Configuration Program (see Chapter 3). Thus, you must wake up the printer for it to receive data and print. To do this, you may program a wake-up character sequence into your hand-held device. Program the wake-up character listed below at least six times for baud rates of 9600 to the RS-232 port. You will need more wake-up characters for faster speeds.
Appendix B: Query 11 Queries can be sent to the microFlash via the infrared link or the RS-232 data link. The printer’s reply to a query returns information about the printer or the print request. There are three steps involved. 1) Frame your query using the correct command format. 2) Send the Query (e.g. via an applications program or a terminal emulator such as “Terminal” in the Windows Accessories group). 3) Use the appropriate table to interpret the printer’s reply.
Quick Reference Command Format Description Status ESC{ST?} Returns info about ability of printer to print next image, and reports any errors from the last print request, e.g. paper condition, command errors, buffer size, battery voltage. Configuration ESC{CF?} Returns information about configuration options, e.g. baud rate, default mode, time-out, etc. Battery ESC{BT?} Returns current battery voltage, temperature and conditions.
ESC{ST?} Status Query Format: ESC{ST?} Reply Format: {ST!E:x;L:x;P:x;R:x;B:x;H:x} Function: Shows whether next print request is doable, or returns info about errors from the last request. Reply Example: {ST!E:N;L:D;P:P;R:62;B:O,H:O} Reply Explanation: ST! This is a reply to a STATUS query. E:N; There are no errors. L:D; The paper release lever is down, ready to print. P:P; Paper is present. R:62; 62K bytes remain in the input buffer. B:O; Acceptable battery voltage and temperature.
ESC{CF?} Configuration Query Format: ESC{CF?} Reply Format: {CF!L:x; B:x; P:x; N:x; H:x;D:x;Y:x;S:x;T:x} Function: Returns information about configurable options . Reply Example: {CF!L:LP;B:096;P:N;N:8;H:B;D:+10%; Y:1;S:Y;T:0060} Reply Explanation: CF! This is a reply to a Configuration query. L:LP; The default mode is Line Printer. B:096; The baud rate is 9600. P: N; No parity is set. N:8; There are 8 data bits. H:B; Hardware and software handshaking are enabled.
ESC{BT?} Battery Query Format: ESC{BT?} Reply Format: {BT!V:x;Tx} Function: Returns current battery voltage and temperature. Reply Example: {BT!V:6.8;T:+25.8C,CH:C} Reply Explanation: BT! This is a reply to a BATTERY query. V:6.8; The current battery voltage is 6.8 Volts. T:+25.8 Battery temperature is 25.8 degrees Centigrade. CH:C Complete charge. Query Reply V n.n Definition T + nn.nC Battery Temperature = +nn.n degrees C or -nn.
ESC{VR?} Version Query Format: ESC{VR?} Reply Format: {VR!F:x;B:x;D:x} Function: Firmware, boot code, and download file #. Reply Example: {VR!F:4.09;B:2.05;D:1.0} Reply Explanation: VR! This is a reply to a VERSION query. F:4:09; The firmware (main program) version is 4.09. B:2.05; The boot code version is 2.05. D:1.0; The download file version is 1.0. Query 106 • Appendix B: Query Reply Definition F n.nn Firmware version is n.nn B n.nn Boot code version is n.nn D n.
ESC{MY?} Memory Query Format: ESC{MY?} Reply Format: {MY!FS:x;FM:x;RS:x;DT:x;DR:x} Function: Returns the size of all memory available in the printer, including the amount used and the amount remaining for the application. Reply Example: {MY!FS:1M;FM:AMD;RS:1M;DT:049152; DR:000512} Reply Explanation: MY! This is a reply to a MEMORY query. FS:1M; This printer contains a 1M bit flash memory FM:AMD; The Flash Manufacturer is AMD. RS:1M; RAM Size = 1M.
ESC{PH?} Printhead Query: ESC{PH?} Reply Format: {PH!TD:x;DD:x;T:x;M:x} Function: Returns the type of print head in use in this printer and the total number of dots across. Reply Example: {PH!TD:0384;DD:203;M:LPT3245T:+25.6C;} Reply Explanation: 108 • Appendix B: Query PH! This is a reply to a PRINTHEAD query. TD:0384; The print head in this printer has 384 dots across. DD:203; The dot density is 203 dots per mm. M:LPT3245 The print head model number is LPT3245. T:+25.
ESC{IR?} Infrared Query Format: ESC{IR?} Reply Format: {IR!P:x;AV:x;DV:x;IV:x;IN:x;ID:x} Function: Returns information about the current infrared settings. Reply Example: {IR!P:IrDA;AV:00;DV:00;IV:1.02; IN:microFlash2;ID:1234567890123456789} Reply Explanation: IR! This is a reply to an INFRARED query. P:IrDA; This printer has the IrDA protocol turned on. AV:00; The ASK version is 00. DV:00; The DIRECT version is 00. IV:1.0-06; The IrDA version specification supported is 1.0.
ESC{FN?} Fonts Query Format: ESC{FN?} Reply Format: {FN!N5:x,N1:x,L:x,UV:x, UD:x,US:x, CPI:x} Function: Returns a list of fonts, both permanent and downloaded. Within a complete font definition, each query character is separated from the next with a comma. A semicolon, carriage return and line feed (“;”, ) separates each font. Reply Example: {FN!N5:MF107,N1:&(26),L:R,UV:1, UD:01/02/96,US:96CHARS BLOCKBOLD, CPI:10.7;N5:MF204,N1:!(21),L:D, UV:1,UD:01/02/96,US:224 CHR BLOCK NORMAL, CPI:20.
ESC {GR?} Graphics Query Format: ESC{GR?} Reply Format: {GR!N5:x,N1:x,L:D,UV:x,UD:x,US:x} Function: Returns a list of all graphics currently downloaded to the printer. The response is similar to that for FONTS, without the FONT related information: Reply Example: {GR!N5:LOGO1,N1:z(7A),L:D, UV:1,UD:05/29/96,US:Big Logo } Reply Explanation: GR! This is a reply to a GRAPHICS query. N5:LOGO1, The graphic has a five-character name, “LOGO1.
ESC{FM?} Formats Query Format: ESC{FM?} Reply Format: {FM!N5:x,L:x,UV:x,UD:x,US:x} Function: Returns a list of all formats currently downloaded to the printer. The response is similar to that for FONTS, without the FONT related information: Reply Example: {FM!N5:LABEL,L:D,UV:1,UD:05/29/96, US:PROPERTY ID LABEL-BC} Reply Explanation: FM! This is a reply to a FORMATS query. N5:LABEL, The format has a 5 character name of LABEL. L:D, The format is a downloaded format. UV:1, The user version is 1.
ESC{DQ?} Demand Quantity Query Format: ESC{DQ?} Reply Format: nnn Function: Returns remaining quantity of images ESC{CN!} Cancel Query Format: ESC{CN!} Reply Format: ESC{CN!} Function: Cancels demand printing ESC{RE!} Reset Query Format: ESC{RE!} Reply Format: ESC{RE!} Function: Resets printer. ESC{RS?} Status Card Reader (Card Reader Option) Query Format: ESC{RS?} Reply Format: ESC{RS!} Function: Returns Card Reader Status.
114 • User Manual and Technical Guide The O'Neil microFlash Series of Printers
Appendix C: Fonts 12 This is an ever-expanding list of available fonts. Dots Wide Dots High chars per inch 20 26 10.2 10 24 20.4 28 31 37 39 11 “n” in AS CII “n” in Hex “n” in Dec Easy Print Description 20 32 MF102 223 chr med blk bld ! 21 33 MF204 224 chr blk nrmal 7.2 ” 22 34 MF072 96 chr large block 5.5 # 23 35 MF055 96 chr large block 24 18.5 $ 24 36 MF185 96 chr blk normal 9 24 22.6 % 25 37 MF226 97 chr small block 19 26 10.
24 35 8.4 H 48 72 PT18T 96 chr lrg blk 24 35 8.4 H 48 72 PT18B 96 chr lrg blk bld 32 49 8.4 J 4A 74 PT24B 96 chr lrg blk bld 32 49 6.3 K 4B 75 PT24F 96 chr lrg blk w/serf 19 31 10.7 ( 28 40 OCRA 113 chr OCR-A 19 31 10.7 ) 29 41 OCRB 126 chr OCR-B 19 26 10.7 ‘ 60 96 FC107 224 Chs Cd Pg 8859-1 16 25 12.6 ] 5D 93 FC12G 224 Chs Cd Pg 8859-1 9 26 22.6 [ 5B 91 FC226 224 Chs Cd Pg 8859-1 16 16 12.
Definitions 13 ASCII Name The character that corresponds to a given hexadecimal or decimal value. Use the IBM Family Character Set for the ASCII equivalent of each hexadecimal and decimal value. ASK ASK or “Amplitude Shift-Keying” is a form of wireless communication between a hand held or notebook computer and a peripheral device, such as a printer. Bit-Mapped Graphics This is the type of graphics that can be printed in Line Printer Mode.
COM Port The COM Port allows your PC to communicate to your microFlash printer or some other peripheral device. The COM Port is the opening in the back of the computer into which you insert a cable that is attached to your printer. COM Port “A” is equivalent to COM Port 1, and COM Port “B” is equivalent to COM Port 2. Compressed Graphics Graphics which have been reduced to the smallest possible size in order to speed data transmission.
Easy Print Mode Easy Print is a programming method used to produce receipts and labels with complex or stored graphics. It allows you to design a custom receipt, ticket or report with borders, lines, logos, bar codes, text and stored graphics in any arrangement or rotation to suit your needs. Field Option An option used in Easy Print Mode that allows the user to enlarge the size of a font, bar code or graphic. Firmware Version The version of the internal software that controls the microFlash.
IrDA IrDA is a term that is often used interchangeably with “wireless.” It refers to the wireless standard of communication developed by the Infrared Data Association. Devices which are “IrDA compliant” provide quick and reliable wireless communication. Any IrDA-compliant computer can communicate with any IrDA-compliant printer, regardless of the other features of each device. Line Printer Mode Line Printer Mode is a method producing receipts and labels with text and simple graphics (e.g.
RS-232 The standard cable connection. Stored Graphic A graphic, such as a company logo, that is stored in the printer’s flash memory. Since the graphic need not be fetched from the computer’s memory, it can be printed in a flash. Time Out The amount of time a microFlash printer stays on before going into sleep mode.
Index A AC Adapter · 46, 86 Ahead Command · 63 ASCII Name · 56, 117 ASK (Amplitude Shift-Keying) · 31, 117 B Back Command · 63 Back Global Option · 66 Bar Code How to Enlarge · 70, 72 Bar Code Names · 70 Batteries Charging Batteries · 46 Cigarette Lighter Adapter · 47 Cycle Life · 47 Low Battery Warning · 45, 46 Replacing the microFlash2 Battery · 48 Replacing the microFlash3 Battery · 48 Specifications · 92 Battery Query · 105 Baud Rate · 22, 27, 28, 117 Beeper · 22, 29 Bit Mapped graphics · 49, 117 Bit
Stop Command · 68 Enlarging Bar Codes · 70, 72 Enlarging Fonts · 57, 69 Enlarging Graphics · 72 Escape Commands · 50 F Field Options · 59, 69, 70, 72, 119 Firmware Version · 119 Flash Memory · 18, 22, 119 Flow control · 28 Flow Control · 119 Fonts · 22, 32, 34, 115 Enlarging Fonts · 69 In Easy Print · 59, 69 In Line Printer Mode · 56, 57 Names · 69 Fonts Query · 110 Form Feed · 55 Format · 112, 119 Formats Query · 112 Fuse Cigarette Lighter Adapter · 47 G L Line Feed · 55 Line Printer Mode · 49, 50, 120
Battery · 45, 46 Dimension · 89, 90, 91 Dots Across, Bytes Across · 53 Replacing the microFlash3 Battery · 48 Weight · 89, 90, 91 N Ni-Cad Battery Pack · 120 Nickel Metal Hydride Battery · 120 P Paper Automatic Paper Loading · 42 Manual Paper Loading · 43 Out of Paper · 41 Specifications · 94 Standard Paper · 42 Paper Loading Problems · 85 Paper Options · 30 Paper Width · 89, 90, 91 Parity · 22, 27, 28, 120 Parts List · 3, 5, 7, 9, 11, 13, 15, 17 PCX File Add · 34 Remove · 35 PCX format · 35, 49 PCX Forma
Status Query · 103 Stop Global Option · 68 Stopping the Paper at a Specified Mark · 67 Store Graphics · 34, 49, 121 T Thermal Paper Specifications · 94 Time Out · 22, 29, 121 Timer · 29 Transmit · 32, 36, 39 Troubleshooting · 85 Downloading Problems · 87 Print Quality Problems · 88 Programming Problems · 86 U Updating the microFlash · 40 V Version Query · 106 Voltage · 22, 45, 46, 105 W Wake the printer · 19, 29 Wake-Up Characters · 100 Warranty · 89, 90, 91 Windows 3.
