Manual

14
Never touch, or allow any object to come into
contact with, the rotating propeller and do not
crouch over the engine when it is running.
Reminder!
Warning:
Make sure that the propeller is well
balanced. An unbalanced propeller and/or
spinner can cause serious vibration which
may weaken parts of the airframe or affect
the safety of the radio-controlled system.
DO NOT forget the WARNINGS and NOTES
on propeller and spinner safety given on
front pages.
Suitable model is the one designed for two-
stroke 32~40 size engines. (Guide weight
2,000~2,500g)
Model
15
STANDARD ACCESSOIES
Glow Plug Type F
(installed on the engine)
Non-Bubble Weight S
RE-2010 Silencer Assembly
Silencer Retaining Screw
INSTALLING THE GLOWPLUG
Install washer on glowplug and insert
carefully into rotor-housing, making sure
that it is not cross-threaded before
tightening firmly.
INSTALLATION OF THE
STANDARD ACCESSORIES
Silencer Body
Pressure Nipple (No.7)
INSTALLING SILENCER
Be sure to apply silicone sealant at the joint
of silencer and engine and also use spring
washers when fastening retaining screws.
Carburetor is designed to use a muffler
pressurized fuel feed system. Avoid big fuel
level difference, and be sure to use a muffler
pressure.