User guide

1. SD/MMC card slot
Insert either MMC or SD cards
in this slot. The slot also
supports SDIO – please see the
Windows Mobile 5.0 user guide
to find out more.
2. Microphone
Speak here when making
a call or voice recording.
3. Power button
Press and hold to turn the
screen backlight on and off
(you can also do this using the
screen backlight button see
number 9 on page 17).
When you close the lid the
screen goes off; if you leave the
lid open, the backlight will time
out (after 30 seconds) and then
the screen will switch off.
A single press of the power
button will turn the screen
on or off.
The phone is turned on at start-
up, after the SIM pin is entered.
If the screen goes off, the phone
will still remain connected.
4. Bluetooth™/Wireless LAN light
This LED will flash blue slowly
when Bluetooth is active, and
quickly when Bluetooth is being
used (such as with a car kit or
headset). It will flash green
when Wireless LAN is on. It will
alternate blue and green when
both Bluetooth and Wireless
LAN are on.
A tour of your Xda Exec
14
5. Charge/Coverage/Alarm light
This light has many functions.
Here they are from lowest to
highest priority:
Phone Coverage: Flashes red
when searching for a network
to connect to. Flashes green
when connected to a
GSM/UMTS network.
Alarm: Flashes red quickly when
an alarm has been triggered.
Charging: The light turns
solid amber during charging.
4
3
2
5
15
1