Operation Manual

163
10
Wireless Connectivity
Bonds
To exchange information in a secure manner, you may use a bond to create a relationship
between your O
2
Xda Flame and another Bluetooth device. To create a bond, you need to
enter the same passcode on the two devices that you want to bond. You need only create a
bond once between two devices. Once a bond is created, the devices recognize the bond and
are able to exchange information without your needing to enter Passcode again.
To create a bond:
You can create a bond between your device and another device that has Bluetooth. Once you
do this, Bluetooth doesn’t need to be in visible mode in order for you to exchange information
wirelessly between the two devices; you only need to have the Bluetooth radio turned on.
1. Tap Start > Settings > Connections tab
2. Tap
Bluetooth > Devices tab > Add new device.... Your device searches for other
Bluetooth devices and displays them in the list.
3. Tap the name of the other device in the list, and then Next.
4. Enter a
Passcode of between 1 and 16 characters and tap Next.
5. Enter the same passcode on the other device.
6. In Display Name, edit the name of the other device if you want.
7. Tap Finish.
Please note: Make sure that the two devices are within 10 meters of one another and that
Bluetooth is in visible mode on both devices.
To accept a bond:
1. Please make sure that Bluetooth is activated and visible to other devices.
2. When prompted to bond with the other device, tap Yes.
3. Enter a passcode of between 1 and 16 characters , and tap
Next. You must enter the same
passcode that was entered on the device requesting the bond.
4. In Display Name, edit the name of the device requesting the bond if you want.
5. Tap Finish.
The bond is created. You can now exchange information with the other device.