Operation Manual

178
11
Synchronization
11.3 Choosing your
synchronization type
USB cable
You can connect your device with other
devices via a mini-USB connector. You can
manually change the connection settings as
follows. The new settings will be used when
you connect your device to the PC next time.
1. Tap Start > Programs > ActiveSync.
2. Tap
Menu tab > Connections.
3. Choose USB in the drop down menu and
check Synchronize all PCs using this
connection.
Bluetooth connection
You can also synchronize your information
by using Bluetooth wireless connectivity
technology, which allows your device to
connect to a Bluetooth-compatible device
within a range of up to 10 meters. For best
connection results, it is recommended that
you connect the device to the PC using USB
to establish a synchronization relationship
before connecting via Bluetooth.
To synchronize via Bluetooth connection:
1. Execute ActiveSync Help on the PC and
follow the instructions for configuring
Bluetooth on your PC to support
ActiveSync.
2. Tap Start > Programs > ActiveSync.
3. Tap
Menu > Connect via Bluetooth.
Make sure that the device and the PC are
within 10 meters of each other.
4. Tap Sync.
5. After finishing the synchronization, tap
Menu tab > Disconnect Bluetooth.
6. Turn off Bluetooth to preserve battery
power if not used.
Please note
Before you connect to the PC via
Bluetooth, please make sure that you
have set up a Bluetooth partnership
with the PC: Tap Start > Settings >
Connections tab > Bluetooth. For
more details, please refer to Chapter 6
Camera and Video.