Operation Manual

194
13
TV Connection and Control
13. TV Connection and Control
The O
2
Xda Flame supports connection to a TV set or projector for viewing photos and videos
with others, making presentations, or to enjoy a richer console gaming experience on a larger
screen.
1. Connect the
TV out connector to the TV out port and the audio plug into the audio jack at
the bottom of the phone.
2. Connect the 3 color ends to the appropriate sockets of the TV set or Projector.
3. Switch your TV to the AV channel and you will be able to see the same image as is on your
O
2
Xda Flame.
Please note
Your O
2
Xda Flame could be connected to any display device which is equipped with
an AV connector. (e.g. TV (NTSC only), Projector, DVD player or Setbox, and so on.)
If you would like to change the display mode from portrait to landscape, you can select
the screen mode from Start > Settings > System tab > Screen. Screen Orientation
enables the End User to switch the orientation of the touch screen between Portrait and
Landscape modes.
TV