Operation Manual

29
2
Getting started
2.2 SIM/USIM card
Before using your O
2
Xda Flame, you must
contact a network operator to get a personal
SIM/USIM (Subscriber Identity Module/
Universal Subscriber Identity Module) card.
The SIM/USIM card contains your O
2
Xda
Flame number, the services included in your
subscription, and personal data such as your
phonebook and messages. The phone is
unusable (except for emergency calls) until
a valid SIM/USIM card is inserted. Your O
2
Xda Flame will display a warning message if
the SIM/USIM card is not inserted properly.
Please note
If the phone or the SIM/USIM card is
lost or stolen, contact your network
operator immediately to prevent
unauthorized use.
Copy SIM/USIM contacts to
phone memory
SIM/USIM contacts will be automatically
copied to your phone when you insert the
SIM/USIM card for the first time. To copy
SIM contacts to your O
2
Xda Flame, tap
Contacts > [find the contact] > Menu >
Copy Contact.
2.3 Battery
Your O
2
Xda Flame contains a removable
and rechargeable Li-Polymer battery. Battery
life will depend on actual usage, network
coverage and whether the device is in
standby mode or not.
Battery life estimates:
• Talk-time:
- - GSM: Up to 6 hours
• - WCDMA voice calling: Up to 4 hours
• - WCDMA video calling: Up to 2.5 hours
• Standby:
- - GSM: Up to 200 hours
- - WCDMA: Up to 170 hours
The above timings are based on the
assumption that you only use one function at
a time. Battery life may also vary depending
on how frequently you switch between
functions. For battery safety, refer to Chapter
15 Safety Information.
7. Slide the cover back into place and
push down until it clicks.
1
2
6. Once the battery has been inserted, push
the side facing you down until it clips into
place (1). Slide the clip (2) on the right
of the battery compartment towards the
battery.