Operation Manual

37
2
Getting started
2.9 Data backup
Your O
2
Xda Flame supports 2 GB of ROM
capacity; however, you may need to backup
data and any new programs that you install
in the ROM to guard against data loss. To
back up your Contacts, Calendar, etc.,
connect your PC with the O
2
Xda Flame;
ActiveSync will start automatically.
2.10 Memory expansion
To expand your O
2
Xda Flame’s memory,
insert a Micro SD card into the card slot on
the right side of the phone. Make sure the
card is inserted correctly.
Please note
Your O
2
Xda Flame does not come with
a Micro SD card. This is an optional
accessory. Please contact your
supplier for further details.
2.11 Resetting your O
2
Xda
Flame
Your O
2
Xda Flame can be reset in the
following two ways: soft reset or hard
reset. Executing soft reset allows you to
reboot your O
2
Xda Flame; only some data
in opened programs may be lost. Your O
2
Xda Flame returns to the same status as the
last time you used it. A hard reset turns the
battery off, returns the device to its default
settings, and deletes all programs, files,
contacts and other information that you have
saved to the device. It is therefore extremely
important to back up data to a storage card
or computer on a regular basis, just in case
a hard reset has to be performed.
To perform a soft reset
If your O
2
Xda Flame responds slowly, stops
responding, or freezes, you can soft reset
it. A soft reset causes the O
2
Xda Flame
to restart and adjust memory allocation.
Unsaved data in any opened applications
may be lost. Use the stylus to press and hold
the Reset button, as shown below.