Full User Manual O2CN613N 5450VCCP08/08 07/09 Xda Serra We’re better, connected
Please Read Before Proceeding THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING. PRIVACY RESTRICTIONS Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded.
Opera® Mobile from Opera Software ASA. Copyright 1995-2008 Opera Software ASA. All Rights Reserved. Google is a registered trademark and Google Maps is a trademark of Google, Inc. in the United States and other countries. YouTube is a trademark of Google, Inc. Sprite Backup is a trademark or service mark of Sprite Software. Copyright © 2008, Esmertec AG. All Rights Reserved. Copyright © 2003-2008, ArcSoft, Inc. and its licensors. All Rights Reserved.
Disclaimers THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED “AS IS” AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND FROM HTC.
Limitation of Damages TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF ANY KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS ARISING OUT OF, OR RELATED TO, IN ANY MANNER, OR THE DELIVERY, PERFORMANCE OR NONPERFORMANCE OF OBLIGATIONS, OR
notebook computer has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and grounded in accordance with all local codes and ordinances. SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT • Use the correct external power source A product should be operated only from the type of power source indicated on the electrical ratings label.
• Keep metal objects away so they don’t come in contact with the battery or its connectors as it may lead to short circuit during operation. • Do not use a battery that appears damaged, deformed, or discoloured, or the one that has any rust on its casing, overheats, or emits a foul odour. • Always keep the battery out of the reach of babies and small children, to avoid swallowing of the battery. Consult the doctor immediately if the battery is swallowed.
NOTE: For France, Earphone (listed below) for this device have been tested to comply with the Sound Pressure Level requirement laid down in the applicable NF EN 503321:2000 and/or NF EN 50332-2:2003 standards as required by French Article L. 5232-1. • Earphone, manufactured by HTC, Model HS S300.
ROAD SAFETY Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency. In some countries, using handsfree devices as an alternative is allowed. SAFETY PRECAUTIONS FOR RF EXPOSURE • Avoid using your phone near metal structures (for example, the steel frame of a building). • Avoid using your phone near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio.
NONIONIZING RADIATION Your device has an internal antenna. This product should be operated in its normaluse position to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Use only the supplied integral antenna.
General Precautions • Avoid applying excessive pressure to the device Do not put heavy objects or apply excessive pressure on the device to prevent damaging the device or distorting the touch screen display. Also avoid carrying the device inside your pocket for extensive lengths of time. • Device getting warm after prolonged use When using your device for prolonged periods of time, such as when you’re talking on the phone, charging the battery or browsing the web, the device may become warm.
• Avoid using your device after a dramatic change in temperature When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the moisture to evaporate before using the device.
Contents Chapter 1 Getting Started 23 1.1 Getting to Know Your Touch Phone and Accessories...................................... 24 Left panel......................................................................................................................................24 Right panel...................................................................................................................................24 Front panel.......................................................................
1.12 Adjusting the Volume..................................................................................... 46 1.13 Using your Device as a USB Drive................................................................... 47 Chapter 2 Using Phone Features 49 Chapter 3 TouchFLO™ 3D 65 2.1 Using the Phone................................................................................................ 50 The Phone screen.......................................................................................
Internet..........................................................................................................................................79 Weather.........................................................................................................................................80 Settings..........................................................................................................................................82 Programs........................................................
5.3 Setting Up ActiveSync® on Windows XP®...................................................... 104 Install ActiveSync.................................................................................................................... 104 Set up synchronisation in ActiveSync............................................................................. 104 5.4 Synchronising With Your Computer............................................................... 105 Start and stop synchronisation.................
Synchronise emails................................................................................................................ 130 Customise email settings..................................................................................................... 130 Chapter 7 Working With Company Emails and Meeting Appointments 133 7.1 Synchronising with the Exchange Server...................................................... 134 Set up an Exchange Server connection......................................
8.6 Using Windows Live™...................................................................................... 163 Set up Windows Live™........................................................................................................... 163 The Windows Live™ interface............................................................................................. 165 Windows Live™ Messenger.................................................................................................
11.2 Viewing Photos and Videos Using Album................................................... 204 Select a photo or video to view......................................................................................... 204 View an image.......................................................................................................................... 205 Play back video........................................................................................................................
12.6 Comm Manager............................................................................................. 238 12.7 JETCET™ PRINT............................................................................................... 239 Open JETCET PRINT................................................................................................................ 239 Set up a printer........................................................................................................................
21 13.3 Changing Basic Settings............................................................................... 270 Date and time.......................................................................................................................... 270 Regional settings.................................................................................................................... 270 Display settings......................................................................................................
Chapter 1 Getting Started 1.1 Getting to Know Your Touch Phone and Accessories 1.2 Installing the SIM Card, Battery, and Storage Card 1.3 Charging the battery 1.4 Using the Strap Holder 1.5 Starting Up 1.6 Navigating Your Device 1.7 Home Screen 1.8 Status Icons 1.9 Start Menu 1.10 Quick Menu 1.11 LED Alerts 1.12 Adjusting the Volume 1.
Getting Started 1.1 Getting to Know Your Touch Phone and Accessories Left panel Right panel VOLUME UP During a call or when playing music, press this button to increase the volume. VOLUME DOWN During a call or when playing music, press this button to lower the volume. Stylus (See “Stylus” in this chapter for details.
Getting Started 25 Front panel Hardware Keyboard See Chapter 4 for details. Touch Screen Earpiece Listen to a phone call from here. Second Camera Use this camera for video call conversations or to take a self-portrait. HOME Press to return to the Home screen. See Chapter 3 for details. BACK Press to return to the previous screen. END • Press to end a call or return to the Home screen. • Press and hold to lock the device. (See “Long Press End Key” under “Settings on your Device” in Chapter 13 for details.
Getting Started Notes When using the four buttons — HOME, BACK, TALK/SEND, and END — and the Navigation Control, please observe the following precautions: • Make sure to press on the icons of the four buttons for the best accuracy. When pressing on the Navigation Control, make sure to press the outer areas near the ENTER button for directional control. • For best results, press with your fingertip. Do not wear gloves. Back panel 3.
Getting Started 27 Top panel POWER Press to turn off the display temporarily. To turn off the power, press and hold for about 5 seconds. For more information, see “Starting Up” in this chapter. Bottom panel Microphone Reset With the stylus, press the Reset button to soft-reset the device. Sync Connector/Earphone Jack/TV Out • Connect the supplied USB cable to synchronise information or plug in the AC adapter to recharge the battery.
Getting Started Accessories The product package includes the following items and accessories: • • • • • • • • • • Battery AC adapter Screen protector Stereo headset USB sync cable TV Out cable Pouch Quick Start Guide and TouchFLO 3D Guide Getting Started and Application discs Extra stylus 1.2 Installing the SIM Card, Battery, and Storage Card Always turn off your device before installing or replacing the SIM card, battery, and storage card.
Getting Started 29 SIM card The SIM card contains your phone number, service details, and phonebook/ message memory. Your device supports both 1.8V and 3V SIM cards. Note Some legacy SIM cards may not function with your device. You should consult with your service provider for a replacement SIM card. There may be fees for this service. To install the SIM card 1. Make sure your device is turned off. Cut-off corner 2.
Getting Started Battery life estimates (approximations): • Standby time: Up to 406 hours for GSM Up to 503 hours for WCDMA • Talk time: Up to 485 minutes for GSM Up to 397 minutes WCDMA • Video call time: Up to 201 minutes for WCDMA Note Battery life is subject to network and phone usage. Warning! To reduce risk of fire or burns: • Do not attempt to open, disassemble, or service the battery pack. • Do not crush, puncture, short external contacts, or dispose of in fire or water.
Getting Started 31 To remove the battery 1. Make sure your device is turned off. 2. Remove the back cover. 3. The bottom right side of the battery has a protruding grip. Lift the protruding grip to remove the battery. Battery grip Storage card To have additional storage for your images, videos, music, and files, you can purchase a microSD™ card and install it into your device. To install a microSD card Insert the microSD card into the slot with its gold contacts facing down.
Getting Started 1.3 Charging the battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. To charge the battery 1. Connect the USB connector of the AC adapter to the sync connector on your device. 2. Plug in the AC adapter to an electrical outlet to start charging the battery.
Getting Started 33 1.4 Using the Strap Holder The strap holder at the bottom panel of your device allows you to attach a wrist strap, neck lanyard, or string accessory. To attach a strap, lanyard or string accessory to the strap holder 1. Remove the back cover. 2. Insert the loop of the strap, lanyard or string accessory through the strap holder hole on the back cover.
Getting Started 1.5 Starting Up After installing your SIM card and battery and charging the battery, you can now power on and start using your device. Turn your device on and off To turn on the power 1. Press and hold the POWER button for a few seconds. 2. When you turn on your device for the first time, a Quick Start Wizard guides you to set up regional settings, date and time, and password. For more information about these settings, see Chapter 13.
Getting Started 35 1.6 Navigating Your Device There are different ways you can navigate and interact with the interface of your device. Finger-touch control A quick and easy way to interact with the home screen and the whole interface of your device is by touch.
Getting Started The direction of swiping resembles the way you move a printed document as you are reading it. For detailed instructions, see “Finger scrolling” in Chapter 3. Slide Sliding on the touch screen also involves dragging with your finger, but you need to press and hold your finger with some pressure before you start to drag. While dragging, do not release your finger until you have reached the target position.
Getting Started 37 Stylus You can use the stylus to navigate and interact with the touch screen. To use the stylus, pull it out from the stylus compartment at the bottom of the right panel of your device. If the backlight is off, removing the stylus automatically turns the backlight back on. The stylus is magnetic and sticks to the side when held close to the device. This prevents you from accidentally losing or misplacing the stylus.
Getting Started Navigation Control On the home screen and in many programs on your device, you can use the Navigation Control for directional control. Press the directional arrows to navigate up, down, left, and right on the screen. When an item has been selected on the screen, press the ENTER button (the centre button) to confirm your selection. The Navigation Control is also touch sensitive and can be used for zooming.
Getting Started 39 1.7 Home Screen The default home screen of the device is the TouchFLO™ 3D Home screen which allows finger-touch access to the most important functions such as contacts, text messages, email, Internet, and more. For more information about using the TouchFLO 3D Home screen, see Chapter 3.
Getting Started Touch Access screen When you open the hardware keyboard while on the Home screen, the Touch Access screen is shown letting you quickly start a task such as writing an email or SMS message, creating a new appointment, open the web browser, and more. Note If you do not have an email account set up or you have more than one email account on your device, the Account Picker screen will open when you tap Email. 1.
Getting Started 41 The following are some of the status icons that you may see on the device.
Getting Started Icons that appear in this area Icons that appear in this area GPRS connecting Vibrate mode GPRS in use Sound on EDGE connecting Sound off EDGE in use HSPA connecting HSPA in use WCDMA/UMTS connecting WCDMA/UMTS in use Maximum signal strength No signal Phone is turned off No phone service Searching for phone service Voice call in progress Call on hold Calls are forwarded Dialling while no SIM card is inserted No SIM card inserted Icons that appear in this area Battery charging B
Getting Started 43 1.9 Start Menu The Start menu, which can be opened from the top left corner of the screen, gives you access to all the programs and settings of your Windows Mobile-powered device. Touch or tap to select an item on the Start menu. Open the Start menu. Open a recently-used program. When you are on another screen, touch or tap this item to return to the TouchFLO 3D Home screen. Open a program. Access more programs. View and change settings. View Help information for the current screen.
Getting Started 1.10 Quick Menu The Quick menu, which can be opened from the top right corner of the screen, shows the currently running programs. You can quickly switch between running programs, stop programs, and see how much program memory is being used. Customise Task Manager settings. (See “Using Task Manager” in Chapter 13.) Stop all currently running programs. Touch this icon to open the Quick Menu. Shows the total percentage of program memory in use. Touch to open the Memory settings screen.
Getting Started 45 1.11 LED Alerts The buttons below the touch screen and the exterior edge of the Navigation Control which is an LED ring will light up in the following situations: Controls Light Behavior SEND button Light flashes when there is an incoming call. END button Light stays solid when there is an incoming call. Navigation Control • The LED ring shows a “breathing” white light when the battery is being charged. • The LED ring shows a solid white light when the battery is fully charged.
Getting Started 1.12 Adjusting the Volume Adjusting the system volume changes the volume level of sound notifications and audio/video playback, whereas adjusting the ring volume affects only the volume of the phone ring. The system volume and ring volume can be separately adjusted. 1. Touch the icon area in the title bar and then touch the Speaker icon ( ) on the System Status screen. 2. To switch between the Ring Volume and System Volume screens, touch Ring or System on top of the screen. 3.
Getting Started 47 1.13 Using your Device as a USB Drive To easily carry media and other files with you, you can use your device’s storage card as a USB flash drive. Touch Start > Settings > Connections tab > USB to PC and then select Disk Drive mode. This allows you to copy files from your computer to the device’s storage card and vice versa faster. Note You need to have a storage card installed on your device to be able to use your device as a disk drive.
Getting Started
Chapter 2 Using Phone Features 2.1 Using the Phone 2.2 Voice Call 2.3 Video Call 2.4 Smart Dial 2.
Using Phone Features 2.1 Using the Phone Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send messages. The Phone screen To open the Phone screen, do one of the following: • On the Home screen, tap Phone. • Press the TALK/SEND button. TALK/SEND button Enter your PIN Most SIM cards are preset with a PIN (personal identification number) that is provided by your wireless service provider. 1.
Using Phone Features 51 2.2 Voice Call Make a call To make a call from the Phone screen 1. On the Home screen, tap Phone. 2. Tap the keys on the keypad to enter the phone number. Tip If you tapped a wrong number, tap to erase each subsequent digit of a number. To erase the entire number, tap and hold . 3. Press the TALK/SEND button to place the call. Tip Note When in a call, use the VOLUME UP/DOWN buttons on the side of the device to adjust the phone volume.
Using Phone Features To make a call from the TouchFLO 3D Home screen Refer to Chapter 3 to learn how to make a call from the TouchFLO 3D Home screen. To make an emergency call Enter the international emergency number for your locale, and press the TALK/ SEND button on your device. Tip Additional emergency numbers may be included in your SIM card. Contact your wireless service provider for details. To make an international call 1.
Using Phone Features 53 Answer a call When you receive a phone call, a message will appear, giving you the option to either answer or ignore the incoming call. The TALK/SEND button will also flash when you receive a call. To answer or reject an incoming call • To answer the call, tap Answer, or press the TALK/SEND button. • To reject the call, tap Ignore, or press the END button. • To mute the ringing sound without rejecting the call, tap Mute Ring.
Using Phone Features To put a call on hold Your device notifies you when you have another incoming call, and gives you the option of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. 1. Tap Answer to take the second call, and put the first one on hold. 2. To end the second call and return to the first call, tap End Call or press END on your device.
Using Phone Features 55 To mute the microphone during a call Tap to toggle between turning on or off the microphone. When the microphone is turned off, the mute icon appears on the screen. To open Notes while in a call Tap or pull out the stylus. To vibrate the device when the call is established You can set the device to vibrate once to alert you that the call has been established with the other party. 1. On the Phone screen, tap Menu > Options >Advanced tab. 2.
Using Phone Features To check a missed call You will see the icon in the title bar when you missed a call. To check who the caller was, do one of the following: • Tap the title bar, then tap and then tap View. • On the Phone screen, tap Menu > Call History and then tap . Call History Use Call History to check for missed calls, dialled numbers, and calls received. To open the Call History screen, tap Menu > Call History on the Phone screen.
Using Phone Features 57 Turn the phone function on and off In many countries, you are required by law to turn off the phone while on board an aircraft. To enable or disable the phone function 1. Tap Start > Programs > Comm Manager. 2. On the Comm Manager screen, tap the Phone button to enable or disable the phone function. When enabled, the ON indicator is activated. To enable or disable Airplane Mode Another way to turn off the phone function is to switch your device to Airplane Mode.
Using Phone Features 2.3 Video Call Your device lets you make video calls when you are within a 3G network coverage area. You need to use a 3G-enabled SIM card to make video calls. Make a video call Do one of the following: • On the Phone keypad, tap the phone number to call, then tap Menu > Video Call to start a video call. • From Contacts, tap and hold the desired contact, and tap Video Call. • From Call History, tap and hold the desired phone number or contact, and tap Video Call.
Using Phone Features 59 End a video call Once a video call is in progress, tap End Call to hang up. Change settings While on a video call, you can change certain settings such as the size of the image, brightness of the video image, the camera to use, and more. The following shows the Video Call screen and control buttons during an ongoing call. 5 1 2 3 4 1 Image display area. Displays your image and the other party's image, depending on the selected Swap View setting. 2 Camera.
Using Phone Features Brightness To adjust the brightness of the live image, press NAVIGATION right to make it brighter or press NAVIGATION left to make it less bright. When you press NAVIGATION left or right during a video call, a brightness bar appears on the screen. Notes • You can also tap Menu > Brightness to adjust the brightness of the live image. • You cannot adjust the brightness for a still image.
Using Phone Features 61 General tab • Show still image. Select the image you want to display when you turn off the camera. • Preset (female). Displays a female picture in place of your image. • Preset (male). Displays a male picture in place of your image. • Custom image. Lets you use an image file as your display picture. When this option is selected, the File Name box and the Browse button will be enabled, allowing you to select an image file. • Last video frame.
Using Phone Features Services tab To set up further calling options for Video Call, tap the Services tab. On the Services screen, select the desired service from the list, then tap Get Settings to access its settings. 2.4 Smart Dial Smart Dial makes it easy for you to dial a phone number.
Using Phone Features 63 If the matching list is long and you want to narrow down the search further, enter another letter. Using the same example above, if you continue to tap “3” which is associated with [d, e, f ], the matching list will be narrowed down to the following names: “Ben Miller”, “George Adams”, “Carter, Ellen”, “Dixon, Allan”. Make a call or send a text message using Smart Dial 1. On the Home screen, tap Phone. 2. Begin entering the first few numbers or characters.
Using Phone Features 2.5 Setting Up Bluetooth SIM Access for Car Kit Phones Bluetooth car kits that support the SIM Access Profile (SAP) can connect to your device and access its SIM card via Bluetooth. Once a SAP connection has been established, you can download SIM contacts from your device to the car kit phone. You can also use the car kit phone to answer and make calls using your device’s SIM card.
Chapter 3 TouchFLO™ 3D 3.1 About TouchFLO™ 3D 3.2 Using the TouchFLO 3D Home Screen 3.
TouchFLO™ 3D 3.1 About TouchFLO™ 3D TouchFLO™ 3D gives you touch control over your Windows Mobile-powered device. TouchFLO 3D provides the following features: • A Home screen that allows finger-touch access to the most widely-used functions, such as People, Messages, Mail, Music, Internet, and more • Allows you to use finger gestures to navigate screens 3.
TouchFLO™ 3D 67 • Press Navigation Right or Left to move to the next or previous tab. Press and hold your finger on the active tab, then slide your finger right or left over the tabs. Release when you have selected the desired tab. Note • Apply some pressure when pressing and holding on the active tab to be able to slide over the tabs. Swipe left across the screen to move to the next tab, and swipe right across the screen to move to the previous tab.
TouchFLO™ 3D Home The Home tab displays the current date, a flip-style clock, and an Alarm icon that indicates whether the alarm is on or off. Missed calls and your upcoming calendar appointments are also shown on the Home tab. To select an item on the Home tab • Touch the item; or • Press Navigation Up or Down first to navigate to the item you want to select and then press ENTER.
TouchFLO™ 3D 69 Touch the date or the flip clock to open the Clock & Alarms screen where you can set the date, time, and alarm. (See Chapter 13 for details.) Swipe upward on the screen to display the smaller digital clock and view more appointments. Touch this area to view details about missed calls in the Call History. (See Chapter 2 for details.) Home tab with flip clock One all-day appointment and up to two timed appointments can be displayed. Touch this area to create, edit or view an appointment.
TouchFLO™ 3D People On the People tab, you can add favourite contacts who you most frequently communicate with. This allows you to quickly make calls, send text messages, and send emails to your favourite contacts. Tip You can add up to 15 favourite contacts on the People tab. To add favourite contacts You should already have created or synchronised contacts on your device before you can add them to the People tab. 1. On the Home screen, slide your finger to the People tab. 2.
TouchFLO™ 3D 71 To choose from your favourite contacts • Do any of the following: To flip through the contact pictures one at a time, swipe your finger up or down the screen. You can also press Navigation Up or Down to flip through the contact pictures.
TouchFLO™ 3D Tips • On the People tab, touch All People to access SIM contacts and all contacts that are stored on your device. • To remove the current favourite contact, touch Menu > Remove Favorite. Messages On the Messages tab, you can read SMS text messages as they arrive and create a new SMS text message. You can also view the text of received MMS messages on this tab. When there are new incoming SMS/MMS messages, the icon on the Messages tab will show the number of new messages.
TouchFLO™ 3D 73 Mail The Mail tab is where you send and receive email messages. Including Outlook Email, you can add up to four POP3/IMAP4 and web-based email accounts in this tab. To add an email account 1. On the Home screen, slide your finger to the Mail tab. 2. If this is your first time to add an email account, touch New Account on the bottom-right side of the screen. 3. Set up your email account using the E-mail Setup wizard. 4.
TouchFLO™ 3D Photos and Videos The Photos and Videos tab lets you visually flip through your photos and video clips and view them in full screen. From this tab, you can also activate the Camera so you can take pictures and record video clips. The Photos and Videos tab displays pictures and video files from the current favourite album. By default, the Camera Shots album which stores the pictures and videos that you captured using the device camera is set as the favourite.
TouchFLO™ 3D 75 • To transfer media files from a computer and view them on the Photos and Videos tab, copy or synchronise them to a folder under \My Device (the device memory) or \Storage Card (if a microSD card is installed). Music The Music tab allows you to visually browse through albums and music tracks and play music. The albums and music tracks that you see on the Music tab are from the Now Playing list of the Library.
TouchFLO™ 3D To advance forward or backward in the music Do one of the following: • Touch and hold on the thin bar below the album art to display the progress bar: Drag your finger right or left on the progress bar to move forward or backward in the current music. • Slide your finger around the Navigation Control as follows: Slide your finger clockwise to advance forward in the music. To move backward in the music, slide your finger anti-clockwise.
TouchFLO™ 3D 77 To browse and play music in the Library The Library organises music into categories, such as Now Playing, Artists, Albums, Genres, All Songs, and more. When you add more albums or music tracks to your device, go to the Library to locate and play the new albums or music tracks. 1. On the Music tab, touch Library to open the Library screen. 2. The tabs at the bottom of the Library screen correspond to the different categories.
TouchFLO™ 3D • To play back a playlist: 1. On the Playlists tab, touch a playlist to open it. 2. Touch the first song in the playlist. The Music tab starts playing the first song. After each song, the next one in the playlist will be played. Note Playlists are not automatically updated when music files have been deleted from the device memory or storage card. There are two types of playlists that can be shown on the Playlists tab: • Custom playlists. Playlists that are created on the Music tab.
TouchFLO™ 3D 79 Internet On the Internet tab, you can open Opera Mobile™ to browse the web and add web favourites for one-touch access to your favourite web sites. Touch here to browse the web using Opera Mobile. Touch All Bookmarks to open Opera Mobile and add, view or delete web favourites. Swipe upward or press Navigation Down to scroll down the screen and access more web favourites. For more information about using Opera Mobile, see Chapter 8.
TouchFLO™ 3D Weather The Weather tab shows you the current weather as well as weather information for the next five days of the week. To add a city The Weather tab can display weather information of your local city and other added cities. Follow the steps below to add a city on this tab. Tip You can add up to 10 cities on the Weather tab. 1. On the Weather tab, touch Menu > Add Location. 2. The Select Country screen then appears.
TouchFLO™ 3D 81 Shows the last weather update. Touch this item to download the latest weather information. Touch to see the weather information for the next five days of the week. To switch between cities, swipe your finger upward/downward, touch the Up/Down arrow on the screen, or press Navigation Up/Down. Touch Menu to add or delete a city, change the temperature to Celsius or Fahrenheit, and more. To choose download options 1. On the Weather tab, touch Menu > Settings.
TouchFLO™ 3D Settings The Settings tab allows you to synchronise information with your computer or the Exchange Server, change sound settings such as the ring tone, and choose a different wallpaper for the Home tab. You can also easily turn on and off the communications features of your device such as Wi-Fi, Bluetooth, and more.
TouchFLO™ 3D 83 Programs The Programs tab allows you to add your favourite programs for one-touch access. Touch an empty slot to add a favourite program. Touch All Programs to access all the programs of your device. Touch a program icon to open the corresponding program. Touch Remove to choose which program to remove from the Programs tab. When you have filled up the screen with programs, scroll down the Programs tab to access more empty slots and add more programs.
TouchFLO™ 3D 3.3 Finger Gestures You can use finger gestures to scroll, zoom and pan on the touch screen. Finger scrolling Finger scrolling can be used to scroll up and down web pages, documents, and lists such as the contacts list, file list, message list, calendar appointments list, and more. When finger scrolling, swipe or flick your finger on the touch screen. To scroll up and down • To scroll down, swipe your finger upward on the touch screen.
TouchFLO™ 3D 85 Finger zooming The type of finger gesture to use when zooming varies in different programs. • To zoom in on a web page in Opera Mobile, tap your finger twice on the screen. See “Using Opera Mobile” in Chapter 8 for details. • To zoom in on a photo in Album, make a full-circle swipe on the touch screen. See “Viewing Photos and Videos Using Album” in Chapter 11 for details.
TouchFLO™ 3D
Chapter 4 Entering Text 4.1 Entering Information 4.2 Using the Hardware Keyboard 4.3 Using the Full QWERTY 4.4 Using the Compact QWERTY 4.5 Using the Phone Keypad 4.6 Using Multitap and T9 Modes 4.7 Using Numeric and Symbol Mode 4.8 Using Block Recognizer 4.9 Using Letter Recognizer 4.
Entering Text 4.1 Entering Information When you start a program or select a field that requires text or numbers, you can either use the QWERTY keyboard or one of the on-screen input methods to enter information. QWERTY keyboard Your device comes with a QWERTY keyboard, which is similar to a standard keyboard on your PC. To use the keyboard, slide the screen panel to the right to reveal the keyboard. The screen orientation automatically switches to landscape mode when the keyboard is opened.
Entering Text 89 Key when pressed Input Panel (Full QWERTY) Input Panel icon Input Selector arrow Icon Notes Input method Icon Text input methods Input method Full QWERTY Letter Recognizer or Block Recognizer Compact QWERTY Transcriber Phone Keypad Keyboard • Some text input methods may not be available in certain language versions of the device. • When in landscape mode, the Compact QWERTY and Phone Keypad are not available.
Entering Text 4.2 Using the Hardware Keyboard You can do the following with the hardware keyboard: • To type lowercase letters and numbers, press the keys using your thumbs or fingers. • To use all uppercase letters, press press again. • To use a single uppercase letter, press corresponding key. • To enter the symbol or punctuation mark, or launch the program that is printed at the upper right corner of a key, press , then press the corresponding key.
Entering Text 91 4.3 Using the Full QWERTY The Full QWERTY is a full on-screen QWERTY keyboard layout similar to a desktop PC keyboard. Tip You can also use the Windows Mobile on-screen keyboard which also has a QWERTY keyboard layout by selecting Keyboard (or Other Input Methods > Keyboard) on the Text input method menu. • Tap to enter letters or symbols. • Tap and hold to enter a punctuation mark, symbol, or number that appears on top of a key. • Tap to enter an uppercase letter.
Entering Text 4.4 Using the Compact QWERTY The Compact QWERTY is a type of on-screen keyboard which features 20 keys. With its large, touch-friendly keys and enhanced features such as T9 predictive input, you can enter text faster and more accurately. • Tap to enter letters or symbols. • Tap and hold to enter a punctuation mark, symbol, or number that appears on top of a key Displays the word candidate list in T9 mode. Tap a word to insert it into your text. Tap to add a word to the T9 dictionary.
Entering Text 93 4.5 Using the Phone Keypad The Phone Keypad is a 12-key on-screen keypad that has a layout similar to mobile phone keypads, plus some additional keys. The Phone Keypad has large keys and enhanced input features such as T9 predictive input, which makes it faster for you to enter text in your messages and documents. • Tap to enter letters or symbols. • Tap and hold to enter a punctuation mark, symbol, or number that appears on top of a key Displays the word candidate list in T9 mode.
Entering Text 4.6 Using Multitap and T9 Modes When using the on-screen keyboards, you can choose to enter text using Multitap or T9 mode. Multitap mode In Multitap mode (for Compact QWERTY and Phone Keypad), enter a character by tapping a key until the desired character is displayed on the screen. • To enter the first letter that shows on a key, tap the key once. To enter the second letter, tap twice.
Entering Text 95 Tap to not add the word. To customise Touch Input settings 1. Tap the Input Selector arrow, then tap Touch Input Settings. 2. On the Touch Input Settings screen, select or clear the following options according to your preferences: • Spell Correction. Lets you correct typographical errors by selecting from a list of possible words that reflect the characters of the keys you have tapped as well as characters of nearby keys. • Word Completion in T9 mode.
Entering Text Tap a number or symbol to insert it into your text. Tap to go to the previous or next page of symbols. See “To lock the keyboard in Numeric and Symbol mode.” Tap to switch to the numeric keyboard Compact QWERTY and Phone Keypad Tap to switch back to the letter keyboard layout. Full QWERTY To switch to Numeric and Symbol mode 1. While using Full QWERTY, Compact QWERTY, or Phone Keypad, tap / . 2. Locate the number or symbol, then tap it to insert it into your text.
Entering Text 97 4.8 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. To use Block Recognizer 1. From a program, tap the Input Selector arrow and then tap Other Input Methods > Block Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • • • Tip Enter letters by writing in the abc (left) area of the box.
Entering Text 4.10 Using Transcriber Transcriber is a handwriting recognition program that enables you to write in cursive, print, or a combination of both. To write using Transcriber 1. Open a program that accepts user input, such as Word Mobile. 2. Tap the Input Selector arrow and then tap Other Input Methods > Transcriber. The Transcriber introductory screen appears. Read the introduction and tap OK. 3. Position the cursor where you want text to appear. 4.
Chapter 5 Synchronising Information With Your Computer 5.1 About Synchronisation 5.2 Setting Up Windows Mobile® Device Center on Windows Vista® 5.3 Setting Up ActiveSync® on Windows XP® 5.4 Synchronising With Your Computer 5.5 Synchronising via Bluetooth 5.
Synchronising Information With Your Computer 5.1 About Synchronisation You can take information from your computer wherever you go by synchronising them to your device.
Synchronising Information With Your Computer 101 Try to synchronise regularly in order to keep information up-to-date in both your device and your computer. Notes • You can also synchronise Outlook email, contacts, calendar, and tasks on your device with the Exchange Server at your work. For more information about setting up your device to synchronise with the Exchange Server, see Chapter 7. • If you are sending your device for repair or performing a hard reset, data from your device will be lost.
Synchronising Information With Your Computer 3. On the Windows Mobile Device Center’s Home screen, click Set up your device. Note Choose Connect without setting up your device if you only want to transfer media files, check for updates, and explore your device but not synchronise Outlook information. 4. Select the items you want to synchronise, then click Next. 5. Enter a device name, then click Set Up.
Synchronising Information With Your Computer 103 Use Windows Mobile Device Center To open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista computer. On Windows Mobile Device Center, you can do the following: • Click Mobile Device Settings to change synchronisation settings.
Synchronising Information With Your Computer 5.3 Setting Up ActiveSync® on Windows XP® The Getting Started disc that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx. Install ActiveSync 1.
Synchronising Information With Your Computer 105 When you finish the wizard, ActiveSync synchronises your device automatically. Notice that Outlook emails and other information appear on your device after synchronisation. 5.4 Synchronising With Your Computer Connect and synchronise your device with your computer using the USB cable or Bluetooth connection. Start and stop synchronisation You can manually synchronise either from your device or computer.
Synchronising Information With Your Computer Change which information is synchronised You can change the information types and the amount of information to synchronise for each type either on your device or your computer. Follow the steps below to change synchronisation settings on your device. Note Before changing synchronisation settings on your device, disconnect it from your computer. 1. In ActiveSync on your device, tap Menu > Options. 2.
Synchronising Information With Your Computer 107 Troubleshoot sync connection problem In some cases, when the computer connects to the Internet or a local network, it may disconnect the connection with your device in favour of the Internet or network connection. If this happens, tap Start > Settings > Connections tab > USB to PC, then clear the Enable advanced network functionality check box. This makes your computer utilise a serial USB connection with your device. 5.
Synchronising Information With Your Computer 5.6 Synchronising Music and Video If you want to carry your music or other digital media along with you while you travel, set up Windows Media® Player on your computer to synchronise music and video with your device. Other than selecting the Media information type to be synchronised, all media synchronisation settings must be set in Windows Media® Player.
Chapter 6 Exchanging Messages 6.1 Messaging 6.2 Text Messages 6.3 MMS 6.4 Types of Email Accounts 6.5 E-mail Setup Wizard 6.
Exchanging Messages 6.1 Messaging Messaging is a central location where you will find all types of messaging accounts, which include text messages (SMS), multimedia messages (MMS), and email accounts. To select a messaging account Do one of the following: • On the TouchFLO 3D Home screen, slide to the Mail tab and then touch Menu > Accounts > Accounts. The Account Picker screen then opens where you can select an account. Tip • You can also tap Start > Messaging to access the Account Picker screen.
Exchanging Messages 111 4. Select the Use signature with this account check box. 5. In the provided text box, enter the information that will be displayed as your signature. 6. If you want the signature to be added whenever you reply or forward messages, select the Use when replying and forwarding check box, then tap OK. 7. Repeat the steps to add a signature to other messaging accounts. 6.2 Text Messages Send short text messages (SMS) up to 160 characters long to other mobile phones.
Exchanging Messages From the Contacts screen 1. Tap Start > Contacts. 2. Tap the contact’s name to open his or her contact card. 3. Touch Send text message. Compose and send a text message After creating a new text message, follow the steps below to enter your message and then send it. 1. To add recipients, enter their mobile phone numbers in the To field, separating them with a semicolon. You can also tap To or tap Menu > Add Recipient to add mobile phone numbers from Contacts. 2.
Exchanging Messages 113 To reply to a text message 1. In the SMS \ MMS inbox, tap a message thread to open it. 2. At the bottom of the screen, type your reply message and then tap Send. Enter your reply message here To copy a message in the thread to the SIM card 1. In the SMS \ MMS inbox, tap the message to open it. 2. Use the Navigation Up or Down control to select a message in the thread that you want to copy to the SIM card. Note You cannot copy a sent message from the thread to the SIM card. 3.
Exchanging Messages To copy a text message from the SIM card to the device 1. In the SMS \ MMS inbox, select the SIM message you want to copy. 2. Tap Menu > Copy to Phone. Note Copying SIM text messages to your device results in duplicate messages in the Inbox folder when your SIM card is in use. To delete a message in the thread 1. In the SMS \ MMS inbox, tap a message thread to open it. 2. Use the Navigation Up or Down control to select a message in the thread that you want to delete. 3.
Exchanging Messages 115 6.3 MMS Sending multimedia messages (MMS) to your friends and family is fun and easy. You can include pictures, videos, and audio clips in a multimedia message. Notes • Multimedia messaging is a charged service and has to be provisioned on your mobile phone account. Contact your wireless service provider to have MMS provisioned as part of your calling plan. • Make sure the size of MMS messages that you send is within the limits allowed by your wireless service provider.
Exchanging Messages • Gateway. Location of the MMS server, which is usually in the form of an IP address. • Port number. HTTP port number used for connecting to the MMS server and for file transfer. • Server address. URL address of the server where MMS messages are stored. • Connect via. Select the connection that your device uses for MMS messages. • Send limit. Select the maximum MMS message size allowed by your wireless service provider. • WAP version. Select either WAP 1.2 or WAP 2.
Exchanging Messages 117 3. In To, enter the recipient’s phone number or email address directly, or tap To, Cc, or Bcc to choose a phone number or an email address from Contacts. Note You may need to scroll up to see Cc and Bcc. 4. Enter a subject for your message. )to select and insert a photo or video clip. When 5. Tap the Insert icon ( selecting a photo or video clip, you can: • Tap Select to insert the selected photo or video clip into the MMS message you are composing.
Exchanging Messages To add text to an MMS message When you tap Insert text here on your MMS message, an empty screen appears where you can enter your text. You can insert the following types of information: Enter your own text Choose from common words or phrases from the My Text list Include a Favorites link Add an emoticon Tip Insert contact information Insert calendar appointment To edit or delete a phrase on the My Text list, tap and hold a string, then tap Edit or Delete from the shortcut menu.
Exchanging Messages 119 Note To record a new audio clip and add it to your MMS message, tap . The Record popup window then opens. Tap Record to start recording, and Stop to end the recording. Tap Play to listen to the recorded audio clip, then tap Add. The new audio clip is then inserted into your MMS message. View and reply to MMS messages To view an MMS message • Use the playback controls • , , and . Tap Contents to see a list of files included in the message.
Exchanging Messages To block a phone number from sending you MMS messages If you do not want to receive MMS messages from a particular sender, you can add the sender’s phone number to the MMS Blacklist. 1. When you receive a new MMS message, open and view the message. 2. To avoid receiving MMS messages from this sender next time, tap Menu > Show > Message Detail. 3. On the Message Detail screen, tap Menu > Show Contact Details. 4. Tap Menu > Save to Blacklist. 5. Tap Done.
Exchanging Messages 121 Set up your device to synchronise Outlook email with the computer If you have installed the synchronisation software on your computer and created a partnership with your device, then your device is ready to send and receive Outlook email. If you have not yet installed the synchronisation software nor created a partnership, do so by following the procedures in Chapter 5.
Exchanging Messages 6.5 E-mail Setup Wizard Windows Mobile’s E-mail Setup wizard walks you through the process of setting up your email account. It has an Auto Setup feature which can automatically set up your email account based on the email address and password that you enter, if your email provider settings are preconfigured on your device.
Exchanging Messages 123 4. Enter Your name and the Account display name and then tap Next. Note If the E-mail Setup wizard was unsuccessful in finding and downloading settings from the Internet, select Internet e-mail from the Your e-mail provider list on the next screen. You will be asked to enter email server settings. See “To specify email server settings” for details. 5.
Exchanging Messages To customise download and format settings Before you tap Finish when setting up your POP3 or IMAP4 email account, you can tap the Review all download settings link at the bottom of the screen to choose download options, message format, and other settings.
Exchanging Messages 125 Set up a custom domain email When you are using an email domain name that is hosted by a different email provider (for example, your email address may be Benjamin@startup.com but Email.com hosts the email account and provides email services), select the Custom Domain option in the E-mail Setup wizard to set up your email account on your device. 1. Add a new email account. See “Add an email account” for instructions. 2.
Exchanging Messages 6.6 Using Email After setting up email accounts on your device, you can start sending and receiving email messages. Create a new email message Depending on your preference, there are two ways you can create a new email message. To start from an empty message 1. On the TouchFLO 3D Home screen, slide to the Mail tab. 2. Select the email account you want to use on the right side of the screen.
Exchanging Messages 127 Compose and send an email After creating a new email, follow the steps below to enter your message and then send it. 1. To add recipients, enter their email addresses, separating them with a semicolon. You can also tap To if you want to add email addresses stored in Contacts. 2. Enter a subject and compose your message. Tip To choose from preset messages, tap Menu > My Text and tap a desired message. To check the spelling, tap Menu > Spell Check. 3. Tap Send.
Exchanging Messages For example, entering “B”, then “E” narrows the list to only the emails that contain sender names and email subjects that start with “BE.” View and reply to messages To download a complete email By default, each email received in the inbox on your device contains only the first few kilobytes of the message. When you open an email, it displays only the headers and part of the message. You must download the whole email to view the complete content.
Exchanging Messages 129 Fetch Mail is also available for Outlook Email. See “Instant download through Fetch Mail” in Chapter 7 for details. • Download may take some time, depending on the speed of your Internet connection, size of the whole email, and whether file attachments are automatically downloaded. To download file attachments • POP3 email account: File attachments of a POP3 Internet email account are automatically downloaded when you download a complete email.
Exchanging Messages Synchronise emails Synchronising emails ensures that new emails are downloaded to the device Inbox folder, emails in the Outbox folder are sent, and emails deleted from the server are removed from your device. The manner in which you synchronise emails depends on the type of email account you have. To automatically synchronise an Outlook email account 1. Connect your device to your computer through USB or Bluetooth.
Exchanging Messages 131 To change the download size and format for Internet email 1. Tap Menu > Options on the Account Picker screen, or tap Menu > Tools > Options while you’re in a message list. 2. Tap your POP3 or IMAP4 Internet email account. 3. Tap Download Size Settings. 4. Under Message format, select HTML or Plain Text. 5. Under Download size limit, select the desired email size. 6. Tap Done. To automatically receive attachments on Outlook emails 1. Tap Start > Programs > ActiveSync. 2.
Exchanging Messages
Chapter 7 Working With Company Emails and Meeting Appointments 7.1 Synchronising with the Exchange Server 7.2 Working With Company Emails 7.3 Managing Meeting Requests 7.
Working With Company Emails and Meeting Appointments 7.1 Synchronising with the Exchange Server To keep up-to-date with your company emails and meeting schedules while you’re out of the office, you can connect your device to the Internet through Wi-Fi or a data connection and synchronise with your company’s Exchange Server. Set up an Exchange Server connection Before you can synchronise or access information on the Exchange Server, you need to set up an Exchange Server connection on your device.
Working With Company Emails and Meeting Appointments 135 Tips • To change synchronisation settings of an information item, for example, Email, select the item, then tap Settings. • To change the rules for resolving synchronisation conflicts, tap Menu > Advanced. 10. Tap Finish. Notes • If you synchronised emails with your computer before, open ActiveSync on your device, then tap Menu > Add Server Source to set up an Exchange Server connection.
Working With Company Emails and Meeting Appointments 7.2 Working With Company Emails Your device gives you instant access to your company emails and lets you manage your messages easier. Direct Push, Fetch Mail, Remote email search, and email flags are just some of the tools you can use to manage your emails. Note Some messaging features depend on the Microsoft Exchange Server version used in your company. Check with your network administrator for the availability of these features.
Working With Company Emails and Meeting Appointments 137 To turn on Direct Push in ActiveSync 1. Tap Start > Programs > ActiveSync and then tap Menu > Schedule. 2. Select As items arrive in the Peak times and Off-peak times boxes. Note When Direct Push is off, you need to manually retrieve your emails. Scheduled synchronisation If you do not want to use Direct Push, you can set a regular schedule for synchronising Outlook email and information. 1. In ActiveSync on your device, tap Menu > Schedule. 2.
Working With Company Emails and Meeting Appointments 4. Wait for the remainder of the message body to download. Notes • For information about changing email sync options such as setting the download size for email, see "Customise email settings" in Chapter 6. • When you receive an email that contains a link to a document such as a PDF or Microsoft Office document located on SharePoint or an internal file server, you can tap the link to view the document on your device.
Working With Company Emails and Meeting Appointments 139 Flag your messages Flags serve as a reminder for you to follow-up on important issues or requests contained in email messages. Flagging messages, which has been a useful feature on desktop Outlook E-mail, can also be done in Outlook Mobile on your device. You can flag received email messages on your device. Requirement Flags are enabled only if emails are synchronised with Microsoft Exchange Server 2007 or higher.
Working With Company Emails and Meeting Appointments Out-of-office auto-reply Outlook Mobile allows you to retrieve and change your out-of-office status. Just like desktop Outlook E-mail, Outlook Mobile automatically sends an auto-reply message when you’re not available. To send out-of-office auto-reply messages 1. Tap Start > Messaging > Outlook E-mail. 2. Tap Menu > Tools > Out of Office. 3. In the I am currently list, select Out of the Office. 4. Enter your auto-reply message, then tap Done. 7.
Working With Company Emails and Meeting Appointments 141 3. Choose whether or not to edit your response email before sending, then tap OK. If you accepted the meeting request, it will automatically be added as an appointment in Calendar on your device. To view the list of meeting participants 1. Tap Start > Calendar. 2. Tap a meeting request that you sent and then tap Attendees. The required and optional attendees will be listed.
Working With Company Emails and Meeting Appointments 7.4 Finding Contacts in the Company Directory In addition to having contacts on your device, you can access contact information from your organization’s Company Directory. By having over-the-air access to the Company Directory, you can easily send email messages and meeting requests to anyone in your company.
Working With Company Emails and Meeting Appointments 143 Notes • You can save a contact from the Company Directory to your device by selecting the contact, then tapping Menu > Save to Contacts. • You can search on the following information as long as that information is included in the Company Directory: First name, Last name, Email name, Display name, Email address, or Office location.
Working With Company Emails and Meeting Appointments
Chapter 8 Internet 8.1 Ways of Connecting to the Internet 8.2 Starting a Data Connection 8.3 Using Opera Mobile™ 8.4 Using YouTube™ 8.5 Using Streaming Media 8.6 Using Windows Live™ 8.7 Using Your Device as a Modem (Internet Sharing) 8.
Internet 8.1 Ways of Connecting to the Internet Your device’s networking capabilities allow you to access the Internet or your corporate network at work through one of the following connections: • Wi-Fi • GPRS, 3G or EDGE • Dial-up Note You can also add and set up the following connections: • VPN: A VPN connection is used to access your corporate network by using an existing Internet connection.
Internet 147 1. The network names of the detected wireless networks are displayed on a pop-up message window. Tap the desired wireless network, then tap OK. Note When you select an open (unsecured) network, you will be automatically connected to the network after tapping OK. You do not need to do steps 2 and 3. 2. On the next pop-up message window, do one of the following: • Tap The Internet if the wireless network connects your device to the Internet.
Internet To check wireless network status You can check the current wireless connection status from any of the following screens of your device: • Title bar. When you enable Wi-Fi on your device, the Wi-Fi ON icon title bar. appears on the After Wi-Fi is turned on, your device scans for available wireless networks and the wireless signal icon appears on the title bar. The arrows in this icon move back and forth while your device is scanning for a wireless network signal.
Internet 149 • Configure Wireless Networks screen. On the Home screen, slide to the Settings tab and then tap All Settings. In the Connections tab, tap Wi-Fi. This screen displays the wireless networks currently available. To connect to a wireless network in the list, tap and hold on the desired network, then tap Connect. Tap a wireless network in the list to view or change its connection settings. You can also add new wireless networks, if available, by tapping Add New.
Internet GPRS/3G Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send and receive email and picture messages on your device. You will need a data plan to use your wireless service provider’s GPRS/3G network. Check with your wireless service provider to find out about GPRS/3G rates. GPRS/3G settings are already preconfigured on your device, and your device is ready to use your wireless service provider’s GPRS/3G services.
Internet 151 6. Enter the Access point name, then tap Next. 7. Enter the user name and password, if required, then tap Finish. Notes • To view help information for any screen, tap the help icon ( ). • To modify your connection settings, tap Manage existing connections and then tap Edit. Dial-up To set up a dial-up connection to your Internet Service Provider (ISP) on your device, you need the same settings that you normally use when you dial up from your computer.
Internet 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the Connections tab, tap Connections. 3. Tap Manage existing connections. 4. Tap and hold the name of the desired connection, then tap Connect. To disconnect active data connections 1. Tap Start > Programs > Comm Manager. 2. Tap the Data Connection button. Note You cannot reconnect a data connection in Comm Manager. 8.
Internet 153 1 Refresh. Tap to reload the web page being viewed. 2 Address bar. Enter the URL of the web site here. 3 Back. Tap to go back to the previous web page viewed. 4 Bookmarks. Tap to go to the Bookmarks screen where you can add a bookmark, edit bookmarked web pages, and send the favourite URL link via one of the Messaging accounts. 5 Tabs. Tap to add a new browsing tab or switch to another existing browsing tab. 6 Home. Tap to go to the Home page. 7 Menu.
Internet View web pages While browsing web pages, use finger gestures to pan and zoom on the web page. To zoom in, tap your finger twice on the screen. To zoom out, tap your finger twice on the screen again. Tip Touch and hold an empty area on a web page to open a shortcut menu that lets you go back to the previous page, reload the page, add the page as a Favorite, and more. You can also tap and hold a link or image on a web page to open a menu with different options.
Internet 155 Tap to open the Settings screen where you can set the default home page, change display settings, set privacy settings, and more. Tap to view items being downloaded. You can also resume or stop current downloads. Tap to view information about the Web page you are browsing. Tap to see web pages that you have viewed. Tap to manage and view web pages that you have saved. Tap to open the Opera Mobile help file. Tap to close Opera Mobile completely. Opera Mobile will not run in the background.
Internet 8.4 Using YouTube™ YouTube™ lets you browse, search, and watch video clips from the YouTube server. Note You need an active connection to use YouTube. If you are using a GPRS/3G connection, your data connection bill may increase significantly due to large file sizes of the videos. To open YouTube Tap Start > Programs > YouTube. Tap to open the Program Displays the current program Guide list. The Program channel being viewed.
Internet 157 To add a new program channel into the Program Guide list 1. On the YouTube screen, tap . 2. On the Search screen, enter the channel you want to add to the Program Guide list. 3. Tap Search. YouTube searches for the channel and then displays the available videos from it. 4. Tap and then on the confirmation screen, tap OK. The channel you just subscribed to will now be shown when you tap Program Guide. Tip You can also add a YouTube user as a program channel.
Internet Watching videos On the Videos, Bookmarks, or History screen, tap a video to launch the YouTube Video Player. Drag to go forward or backward in the video. Download progress Buffered video Tap to go back to the beginning of the video. . Tap to toggle between playing and pausing the video. Tip Tap to stop the video playback. Tap to resize the video to fit the screen. Tap again to go back to actual size. To adjust the volume, press the VOLUME CONTROLS on the side of the device.
Internet 159 This control Does this NAVIGATION left (Landscape orientation) Press and hold to go back in the video VOLUME BUTTONS Press to adjust the volume. When you tap Stop ( ) or finish watching the entire video, you are presented with options on what you can do next. Tap to go to the next page of related videos. If no action is taken, it automatically goes to the next page after 10 seconds. Tap to view details about the video you just watched.
Internet Bookmarks You can store frequently viewed videos into Bookmarks for quick access. To view Bookmarks On the YouTube screen, tap . Tap a video to watch it. To add a video into Bookmarks Do one of the following: • After watching a video, tap • On the list of videos, tap on the video you want to add to Bookmarks and then tap . . To delete a video from Bookmarks 1. On the Bookmarks screen, tap Edit. 2. Tap on the video you want to remove from Bookmarks. 3. On the confirmation screen, tap Yes.
Internet 161 History View recently watched videos on the History screen. To view History On the YouTube screen, tap watch it. Note . Tap a video to To clear the History list, tap Clear. 8.5 Using Streaming Media Streaming Media lets you stream live broadcasts or on-demand media content from the web. The media is sent in a continuous stream to your device and is played as it arrives, along with the audio. The Streaming Media program allows you to play 3GP and MPEG-4 files.
Internet 3. On the web page, tap the RTSP link. 4. Streaming Media then automatically opens and starts playing the file. During playback, use the button controls to play/pause, switch to full screen, rewind, and fast forward. Rewind Drag to go backward or forward on the video. Tap to toggle between playing or pausing the video playback. Tap to switch to full screen mode. In full screen mode, tap the screen to switch back.
Internet 163 To view streaming video information Tap Menu > Properties to view the properties and general information of a streaming video clip, such as video codec, audio codec, dimension, frames, and duration of the video. To configure streaming video connection settings Tap Menu > Options to configure the following settings: • Connect via. Choose whether you want to connect to the Internet or corporate network (intranet) to locate a streaming video clip. • UDP port range.
Internet To set up Windows Live™ for the first time 1. Tap Start > Programs > Windows Live and then tap Sign in to Windows Live. 2. Tap the links to read the Windows Live™ Term of Use and the Microsoft Privacy Statement. After reviewing them, tap Accept. 3. Enter your Windows Live™ Mail or Hotmail address and password, select the Save password checkbox, then tap Next. 4. Tap Next. 5. Choose what information you want to sync online with your device.
Internet 165 The Windows Live™ interface On the Windows Live™ main screen, you will see a search bar, navigation buttons, and an area where you can show and customise your profile. 1 1 Search bar 2 Navigation buttons. Tap the left or right arrow to switch between Windows Live™ Messenger, Windows Live™ Mail, and Sync status. 3 Tap to change the display name, picture, or personal message. 4 Tap Menu to access and change settings.
Internet Windows Live™ Messenger With this mobile version of Windows Live™ Messenger, you enjoy many of the same cool features that you get from the desktop version, which include the following: • • • • • • • • Note Instant messaging via text and voice Multiple conversations Insert emoticons Contact list with presence Send and receive files including photos Change status/display name View contacts by online status, groups, and more Send messages even when a contact is offline Before you can use Wi
Internet 167 To sign in and out 1. Tap Sign in on the Messenger screen. 2. If this is your first time to sign in, a message appears to inform you that your messenger contacts will be added to the contact list on your device. Tap OK to add them. Signing in may take several minutes, depending on your connection speed. 3. To sign out, tap Menu > Sign Out. To start and end conversations 1. In the contact list, select a contact, then tap Send IM to open a message screen. 2.
Internet Add Windows Live™ contacts You can add new Windows Live™ contacts in Windows Live™ Messenger or in Contacts. To add a Windows Live™ contact in Live Messenger 1. Tap Menu > Add new contact. 2. Enter the email address of the contact, then tap OK. To add a Windows Live™ contact in Contacts 1. On the Home screen, slide to the People tab and then tap All People. 2. Tap New, then tap Windows Live. 3.
Internet 169 8.7 Using Your Device as a Modem (Internet Sharing) Internet Sharing connects your desktop or notebook computer to the Internet by using your device’s data connection (GPRS or EDGE, for instance). You can choose to connect via USB or Bluetooth. Notes • Make sure your device has a SIM card installed, and your device has a GPRS/3G or phone dial-up modem connection. If your device has not been set up with a data connection yet, tap Menu > Connection Settings on the Internet Sharing screen.
Internet To use your device as a Bluetooth modem For the computer to use the Internet connection of your device, activate Internet Sharing on your device, then set up a Bluetooth Personal Area Network (PAN) between the computer and your device. 1. On your device, turn on Bluetooth and set it to visible mode by following the steps in “To turn Bluetooth on and make your device visible” section in Chapter 9. 2.
Internet 171 c. Under Network Tasks, click View Bluetooth network devices. d. In the Bluetooth Personal Area Network Devices dialog box, select your device, then click Connect. Note If the Bluetooth adapter or dongle on your computer was installed using a thirdparty provided driver, open the Bluetooth software that came with the Bluetooth adapter/dongle to connect your computer and device via Bluetooth. Refer to the Bluetooth adapter/dongle documentation for more information. 8.
Internet Category Channels Tap to load pre-selected RSS channels. Note If the RSS channel you want to subscribe to is not in the list of known channels, tap Back, then select another option on the New Channel Wizard screen. For more information on these other options, see the Help on your device. 3. Select the checkboxes of the RSS channels you want to subscribe to, then tap Finish. Tip Channels are grouped by categories.
Internet 173 Tap to select the channel category to display Channel list Channel is updated. Tap it to view the headlines. Tap to update the channels Headline count Tap to cancel channel updating To add new channels 1. In the channel list, tap Menu > Channel > New to open the New Channel Wizard screen. 2. Select an option, then follow screen instructions to add new channels. For more information on New Channel Wizard options, see Help on your device.
Internet To add a new category, tap Menu > Categories in the channel list to display all categories, then tap Menu > New. To rename or delete a category, tap Menu > Categories in the channel list to display all categories, select a category, then tap Menu > Rename or Menu > Delete. If you want to change the channel category, tap and hold the channel in the channel list, then tap Change Category. Select a new category and tap OK.
Internet 175 View the news summary Tap a headline in the headline list to display the news summary. Channel name Headline and read status Audio/Video/Image file attachment. Tap to download the file. News summary Tap to open the news item in Opera Mobile. See “Using Opera Mobile” in this chapter for details.
Internet To download, play, or save podcasts 1. When you see an audio or video file attachment in the news summary, do one of the following to download the file: • Tap Menu > Podcasts > Start Download. • Tap the Download audio/Download video link below the audio/video file icon. Tip To cancel the file download, tap Menu > Podcasts > Cancel Download, or tap Cancel download below the audio/video file icon. 2.
Chapter 9 Bluetooth 9.1 Bluetooth Modes 9.2 Bluetooth Partnerships 9.3 Connecting a Bluetooth Hands-free or Stereo Headset 9.4 Beaming Information Using Bluetooth 9.5 Bluetooth Explorer and Bluetooth File Sharing 9.
Bluetooth 9.1 Bluetooth Modes Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about eight meters without requiring a physical connection. Bluetooth on your device operates in three different modes: • On. Bluetooth is turned on. Your device can detect other Bluetooth-enabled devices, but not vice versa. • Visible. Bluetooth is turned on, and all other Bluetooth-enabled devices can detect your device. • Off.
Bluetooth 179 9.2 Bluetooth Partnerships A Bluetooth partnership is a relationship that you create between your device and another Bluetooth-enabled device in order to exchange information in a secure manner. To create a Bluetooth partnership 1. On the Home screen, slide to the Settings tab and then tap Menu > Bluetooth Devices > Devices tab. 2. Tap Add new device. Your device displays the names of other Bluetooth devices within range. 3. Tap the device name in the box, then tap Next. 4.
Bluetooth To accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in visible mode. 2. Tap Yes when prompted to establish a partnership with the other device. 3. Enter a passcode (the same passcode that is entered on the device requesting the partnership) to establish a secure connection. The passcode must be between 1 and 16 characters. 4. Tap Next. 5. Tap Done. You can now exchange information with the paired device.
Bluetooth 181 3. Tap the name of the Bluetooth headset, then tap Next. The device will automatically pair the device with the Bluetooth headset. Windows Mobile will automatically try one of the preconfigured passcodes (0000, 1111, 8888, 1234) to pair the Bluetooth headset with the device. If this fails, you have to enter the passcode delivered with your headset manually. Note If the Bluetooth stereo headset becomes disconnected, turn the headset on and repeat step 1 to 2 above.
Bluetooth a. On your computer, open Bluetooth Devices from the Control Panel, then click the Options tab on the Bluetooth Devices window. b. For Windows Vista, select Allow Bluetooth devices to find this computer. For Windows XP, select Turn discovery on and Allow Bluetooth devices to connect to this computer. c. Create a Bluetooth partnership between your device and computer. For information about creating a partnership, see “Bluetooth partnerships”. d.
Bluetooth 183 9.5 Bluetooth Explorer and Bluetooth File Sharing Bluetooth Explorer searches for other Bluetooth devices that have file sharing enabled and lets you access their Bluetooth shared folder. You can copy files from and to their shared folder, and create subfolders in it. When you enable Bluetooth file sharing on your device, other Bluetooth-enabled devices will also be able to access your Bluetooth shared folder. To enable Bluetooth Explorer and Bluetooth file sharing on your device 1.
Bluetooth 2. Bluetooth Explorer then scans for other Bluetooth devices that have file sharing enabled. From the list, tap to select a Bluetooth device you want to connect to. You may need to enter a passcode in order for you to connect to the selected device. If there are files contained in the Bluetooth shared folder on the other device, you will be able to see them on the Bluetooth Explorer screen. 3. Select one or more files, then tap Menu > Edit and choose to cut or copy the files. 4. Tap Up twice.
Bluetooth 185 To print contact information 1. On the Home screen, slide to the People tab and then tap All People. 2. Select the contact whose information you want to print. 3. Tap Menu > Print via Bluetooth > Menu > Search Devices. Your device starts to search for Bluetooth devices. 4. Select the Bluetooth printer and tap Menu > Send File. 5. Set the printing options you want, then tap Print. To print a calendar appointment 1.
Bluetooth
Chapter 10 Navigating on the Road 10.
Navigating on the Road 10.1 Guidelines and Preparation for Using GPS If you install a GPS software on your device, please follow these guidelines before and when using your device as a GPS device. • Do not operate the GPS system while driving. The plotted GPS route is only for driving reference. It should not interfere with actual driving behaviour.
Navigating on the Road 189 • Please use the GPS system cautiously. Users shall be liable for any damages resulting from negligent operation of the system. • The GPS signal cannot pass through solid non-transparent objects. Signal reception may be affected by obstructions such as high-rise buildings, tunnels, bridges, forests, weather (rainy or cloudy days), etc. If the vehicle’s visor contains metal, it will be difficult for the GPS signal to pass through.
Navigating on the Road
Chapter 11 Experiencing Multimedia 11.1 Taking Photos and Videos 11.2 Viewing Photos and Videos Using Album 11.3 Using Windows Media® Player Mobile 11.4 Using FM Radio 11.5 Using Audio Booster 11.
Experiencing Multimedia 11.1 Taking Photos and Videos Use Camera to take photos and record video clips. You can either use the main (back) camera or second (front) camera to take photos or shoot videos. To open the Camera screen On the Home screen, slide to the Photos and Videos tab and then tap the camera icon ( ). The screen orientation automatically switches to landscape mode when you open Camera. Tip You can also tap Start > Programs > Camera to open the Camera program.
Experiencing Multimedia 193 You can select from the following capture modes: Icon Capture Mode Photo Captures standard still images. Video Captures video clips, with or without accompanying audio. Panorama Captures a sequence of still images continuously in one direction, and allows stitching of all the images to create a panoramic view of a scenery. MMS Video Captures video clips suitable for sending with MMS messages.
Experiencing Multimedia Camera controls The camera comes with an auto-focus function to let you capture sharp and crisp photos and videos of your subjects. Depending on the Shoot Option you have chosen, you will need to either touch or press the ENTER button to activate autofocus. When auto-focus is activated, it is indicated by a flashing white bracket ( ). When focus is set, the bracket changes to a steady green bracket ( ).
Experiencing Multimedia 195 1 Zoom control. Tap Tip to zoom in, or to zoom out. You can also press NAVIGATION up/down (Landscape orientation) or slide your finger clockwise or anti-clockwise on the centre NAVIGATION CONTROL to zoom in or out. 2 Album. Tap to open Album. See “Viewing Photos and Videos Using Album” for details. 3 Capture mode. Displays the current capture mode. Tap to open an on-screen menu where you can choose the capture mode. 4 Menu. Tap to open the Camera Settings screen.
Experiencing Multimedia Menu Panel The Menu Panel provides a quick way of adjusting most common camera settings and lets you access more advanced camera settings. On the Camera screen, tap to open the Menu Panel. To adjust a setting, keep tapping a button on the panel, for instance, White Balance, to cycle through the available settings. To access advanced options, tap . Note The available settings on the panel depend on the selected capture mode. 6 1 5 2 4 3 1 Flash Light.
Experiencing Multimedia 197 5 Brightness. Tap to open the Brightness bar at the bottom of the screen. On the Brightness bar, tap to decrease, or to increase the brightness level. Tap outside the Brightness bar to apply the change. 6 White Balance. White balance enables the camera to capture colours more accurately by adjusting to different lighting conditions. White balance settings include: Auto ( ), Daylight ( ), Night ( ), Incandescent ( ), and Fluorescent ( ).
Experiencing Multimedia The camera zoom range for a photo or a video clip depends on the capture mode and resolution. Refer to the table for more information. Capture mode Photo Video Panorama MMS Video Contacts Picture Picture Theme Note Resolution Zoom range 3M (2048 x 1536) 1.0x to 2.0x 2M (1600 x 1200) 1.0x to 2.0x 1M (1280 x 960) 1.0x to 2.0x Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.0x CIF (352 x 288) 1x and 1.5x Large (320 x 240) 1x and 1.
Experiencing Multimedia 199 The Review screen After capturing, the Review screen lets you view, send, or delete the photo or video clip by tapping an icon at the bottom of the screen. Review screen icons Icon Function Back Return to the live Camera screen. Delete Delete the captured image or video. View View the captured image or video in the Album program. Send Send the captured image or video via email or MMS.
Experiencing Multimedia Advanced Options The Advanced Options let you adjust options for your selected capture mode and set Camera program preferences. Access the Advanced Options by tapping Advanced on the Menu Panel. You can either tap on-screen or press NAVIGATION up/down (Landscape orientation) to navigate through the Advanced Options screen. Tap an item to change the setting. Tap to go through the different Advanced Camera Settings screens. Tap to go back to the Camera screen.
Experiencing Multimedia 201 • Keep Backlight. Turn the backlight on or off. This overrides your device backlight settings while you are using the camera. • Shutter Sound. Choose whether or not you want the camera to make a shutter sound when you press the ENTER button. • Shoot Option. The camera comes with an auto-focus feature that is activated when the ENTER button is either touched or pressed. • • Touch and Press (Default).
Experiencing Multimedia • Metering Mode. Select a metering mode to allow the camera to measure the amount of light and calculate the best-fit exposure value before capturing. Choose either Center Area to measure light using the centre area of the subject, or Average to measure light using the area around the subject. • Prefix. When Default is selected as the prefix, the file name of each new captured file is set to “IMAGE” or “VIDEO” followed by a sequential number, for example: IMAGE_001.jpg.
Experiencing Multimedia 203 • Template (Picture Theme mode). Select a template. • • Recording Limit (Video mode). Set the maximum duration or file size for recording video. Template Folder (Picture Theme mode). By default, templates are stored in the \My Documents\Templates folder on the device’s Main Memory. If you transferred some templates to a storage card (via File Explorer), set this option to Main + Card to specify that templates are located in both the main memory and the storage card.
Experiencing Multimedia 11.2 Viewing Photos and Videos Using Album Use Album to view images and videos in your device. Album offers a host of features that let you rotate images, view your images as a slideshow, use images as contact pictures, and more. Note Album can only display files in the BMP, GIF, PNG, JPG, Animated GIF, 3GP, MP4, and WMV formats. To open Album Do one of the following: • On the Home screen, slide to the Photos and Videos tab and tap Album.
Experiencing Multimedia 205 • Tap an image to view it in full screen mode. See “View an image” for details. • Tap a video file (files with the icon) to play back the video file. See “Play back video” in this chapter for details. • Select a still image and then tap Menu > Slideshow to view the images in the album as a slideshow. Animated GIF and video files will not be played back in the slideshow. See “To view still images as a slideshow” in this chapter for details.
Experiencing Multimedia To rotate the image While viewing images, you can automatically rotate the image by simply turning your device sideways. To view the next or previous image When viewing images in Portrait or Landscape mode, go to the next image by swiping your finger across the screen from right to left. Go back to the previous image by swiping your finger from left to right.
Experiencing Multimedia 207 To zoom in or out of an image While viewing an image, make a full circle motion on the screen with your finger. Slide your finger clockwise on an area to zoom in on that area. Tips Slide your finger counterclockwise to zoom out. • When you zoom in on an image, double tap the screen to automatically zoom out and fit the image to the screen. • When you zoom in on an image, tap and hold the screen so you can pan the image.
Experiencing Multimedia To view still images as a slideshow While viewing the slideshow, tap the screen to show playback controls. Note The screen orientation automatically switches to landscape mode when viewing a slideshow. Tap to open the slideshow options where you can set the transition effect to use, time per slide, and orientation of the images. Tap to return to the main Album screen or the Photos and Videos tab. Tap to go back to the previous image.
Experiencing Multimedia 209 Play back video While playing back video, tap the screen to show the playback controls. Drag to go forward or backward in the video. Elapsed time Total duration Tap to go back to the beginning of the video. Tap to stop video playback. Tap to play or pause video playback. Tip If the video is in your favourite album, you can start the video playback from the Photos and Videos tab on the Home screen. On the Photos and Video tab, tap Play.
Experiencing Multimedia 11.3 Using Windows Media® Player Mobile Windows Media® Player Mobile plays digital audio and video files that are stored on your device or on a network, such as on a web site. Video File Formats Supported File Extensions Windows Media Video MPEG4 Simple Profile H.263 H.264 Motion JPEG .wmv, .asf .mp4 .3gp, .3g2 .mp4, .3gp, .3g2, .m4v .
Experiencing Multimedia 211 To open Windows Media® Player Mobile Tap Start > Programs > Windows Media. About the controls Tap and drag to jump to any part of the video or audio Mute/Unmute Full screen Increase volume Visit WindowsMedia.com Decrease volume Skip to the beginning of Skip to the next file the current file or to the Play/Pause previous file About the screens and menus Windows Media® Player Mobile has three primary screens: • • • Playback screen.
Experiencing Multimedia At the bottom of each screen, you can open a Menu. The commands on this menu vary, depending on which screen you are viewing. For more information about the commands in these menus, see Help on your device. Synchronise video and audio files Use the latest version of Windows Media® Player on your computer to synchronise digital media files from your computer to your device. This ensures that protected files and album art (for skins) are copied to your device correctly.
Experiencing Multimedia 213 The files will begin synchronising to your device. The next time you connect your device to your computer while Windows Media® Player is running, synchronisation will start automatically. To synchronise content manually to your device 1. If you have not set up media synchronisation between your device and computer, follow steps 1 to 3 in “To synchronise content to your device automatically”. 2. Click the Sync tab on the Windows Media® Player of your computer.
Experiencing Multimedia Play media Use the Library to find and play songs, videos, and playlists that are stored on your device or an installed storage card. To update the Library 1. If you are not on the Library screen, tap Menu > Library. 2. On the Library screen, tap the Library arrow (near the top of the screen), then tap the media storage that you want to use, for example, Storage Card. 3. In most cases, Windows Media® Player Mobile automatically updates the library.
Experiencing Multimedia 215 Playlists In Windows Media® Player Mobile, you can create a new playlist by saving the current Now Playing playlist and giving it a new name. To save a new playlist 1. If you are not on the Library screen, tap Menu > Library. 2. Tap to select a category (for example, My Music or My Playlists). 3. Select a media file that you want, then tap Menu > Queue Up. This adds the file to the Now Playing list.
Experiencing Multimedia 11.4 Using FM Radio FM Radio allows you to listen to FM radio stations on your device. Since FM Radio uses the provided stereo wired headset as an antenna, you must plug in the headset first onto the earphone jack of your device before you open the program. To open FM Radio Tap Start > Programs > FM Radio. The first time this program is used, it will automatically scan for available FM channels in your area, save them as presets, then play the first FM station found.
Experiencing Multimedia 217 This control Does this 1 Turns off FM radio. 2 See “Radio display” for details. 3 Searches the FM band for the next higher FM channel. 4 Increases the radio frequency by 0.1MHz. 5 Turns the sound on or off. 6 Allows you to save up to six favourite FM stations as presets. Tap a button to tune in to a favourite station. 7 Switches between headset and speaker output. 8 Stereo/Mono Allows you to switch between Mono and Stereo modes.
Experiencing Multimedia Radio display 1 Shows the status of FM Radio. 1 2 2 Shows the preset number when you select a preset FM station. 3 Shows the received signal strength. 3 4 Shows the radio frequency. 4 Device controls used in FM Radio Navigation • Press NAVIGATION left/right to search the FM band for the next lower/higher FM channel. When the search reaches the last station, it cycles back to the beginning of the FM band.
Experiencing Multimedia 219 You can save up to 20 preset radio stations. Radio stations that are saved on Presets 1 to 6 can be accessed on the main FM Radio screen. Tip Tap to remove a favourite FM station from the list. 3. When done, tap OK. To listen to a preset FM station Do one of the following: • On the main FM Radio screen, tap the preset button that shows your favourite station. • On the Preset screen, select a preset number that shows your favourite station, then tap Listen.
Experiencing Multimedia 11.5 Using Audio Booster Audio Booster optimises sound for a better listening experience. It provides preset moods, such as hip hop, jazz, rock, etc., and several enhancement presets that suit different types of music. To access Audio Booster Tap Start > Programs > Audio Booster. 5 1 This control Does this 1 On Select the check box to enable or disable the equalizer. 2 Frequency band Drag the sliders to adjust the frequency.
Experiencing Multimedia 221 3. Enter a preset name and then tap Done. The preset you created will be added to the list box. To delete a custom equalizer preset 1. Tap the list box then select the Equalizer preset you want to delete. 2. Tap Menu > Delete Preset. Note You can only delete custom equalizer presets. Equalizer presets that are pre-installed cannot be deleted. 11.6 Using MP3 Trimmer Use MP3 Trimmer to trim MP3 files. You can choose to save it as a new file or set it as a ring tone.
Experiencing Multimedia To trim the MP3 file 1. Tap Start > Programs > MP3 Trimmer. 2. Tap Open to find the MP3 file in the device or storage card. 3. On the MP3 Trimmer screen, use the stylus to adjust the Start Point and End Point. After you set the Start Point, the song will play back starting from the start point. After you set the End Point, the song will play back starting from 5 seconds before the end point. 4. Tap Play to play back the trimmed song. 5.
Chapter 12 Programs 12.1 Programs on your Device 12.2 Adding and Removing Programs 12.3 Adobe® Reader® LE 12.4 Calendar 12.5 Contacts 12.6 Comm Manager 12.7 JETCET™ PRINT 12.8 Microsoft® Office Mobile 12.9 Notes 12.10 Java 12.11 SIM Manager 12.12 Sprite Backup 12.13 Tasks 12.14 Voice Recorder 12.15 Voice Speed Dial 12.16 WorldCard Mobile 12.17 ZIP 12.
Programs 12.1 Programs on your Device The following are programs you can find on your device or install from the Application disc. Programs in the Start Menu Icon Description Office Mobile Use the complete suite of Microsoft® Office applications for your mobile device. Excel Mobile Create new workbooks or view and edit Excel workbooks. OneNote Mobile Create notes with text, photos, and voice recordings. PowerPoint Mobile View PowerPoint slides and presentations.
Programs 225 Programs screen Icon Description Games Play these pre-installed games: Bubble Breaker, Teeter and Solitaire. ActiveSync Synchronise information between your device and a PC or the Exchange Server. See Chapter 5 and 7 for details. Adobe Reader LE View PDF (Portable Document Format) files on your device. Album View photos and videos that you captured using the device camera. See Chapter 11 for details.
Programs Icon Description FM Radio Listen to your favourite FM radio stations. See Chapter 11 for details. Getting Started View a list of “how to’s” that you can reference to learn basic features and settings of your device. Internet Sharing Connect your notebook computer to the Internet using your device's data connection. See Chapter 8 for details. Java Download and install Java applications, such as games and tools, on your device.
Programs 227 Icon Description Spb GPRS Monitor Use this program to measure the amount of data transfers that you have made via the GPRS or GSM network connection, and calculate network usage costs. You can install this program from the Applications disc. Sprite Backup Back up your device’s data and files to a specified folder, a storage card, or a computer. You can install this program from the Application disc. Streaming Media Stream live or on-demand video. See Chapter 8 for details.
Programs 12.2 Adding and Removing Programs Additional programs, such as the programs in the Application disc or other programs that you purchase, can be installed and uninstalled on your device. Your device does not allow you to uninstall most of the preinstalled programs. Note Before you purchase additional programs for your device, make sure that they are compatible with your device. To install a program 1.
Programs 229 12.3 Adobe® Reader® LE Adobe® Reader® LE is an application for viewing PDF (Portable Document Format) documents on your device. It supports a subset of the features found in the PC versions of Adobe Reader. To open Adobe Reader LE Tap Start > Programs > Adobe Reader LE. To open a PDF file on your device • Open a PDF file in Adobe Reader LE; or • Open File Explorer, find the PDF file, then tap the file to open it.
Programs To search for text in the document 1. Tap Tools > Find > Text or tap in the toolbar. 2. Type in the text to be searched, then tap Find. The matched text in the document will be highlighted. 3. To view the next occurrence of the text, tap Tools > Find > Next. Tips • Adobe Reader LE displays a bookmark pane for the PDF files that contain bookmarks. Tap the bookmarks to go to a specific section/page within the file.
Programs 231 4. Specify the type of category for your appointment, so that it can be grouped with other related appointments. Tap Categories, then select a preset category (Business, Holiday, Personal, or Seasonal), or tap New to create your own category. 5. When finished, tap OK to return to the calendar. Notes • All-day events do not occupy blocks of time in Calendar; instead, they appear in banners at the top of the calendar. • To remove an appointment, tap Menu > Delete Appointment.
Programs View appointments By default, Calendar displays appointments in Agenda view. You can also look at your appointments in Day, Week, Month, and Year views. The highlighted hours here indicate the time of your appointments. The red box and arrows indicate that there are conflicting appointments. Tap to view appointment details. Tap to switch views. Agenda view • To see detailed appointment information in any view, tap the appointment.
Programs 233 Send appointments To send a meeting request Use Calendar to schedule meetings via email with contacts who use Outlook or Outlook Mobile. 1. Open the Calendar screen. 2. Schedule a new appointment, or open an existing one and tap Menu > Edit. 3. Tap Attendees, then tap Add Required Attendee or Add Optional Attendee and add the contacts whom you want to invite. Note You can specify if an attendee is required or optional only if your device is connected to a Microsoft Exchange 2007 server.
Programs 12.5 Contacts Contacts is your address book and information storage for people and businesses you communicate with. You can add the following types of contacts to your device: • Outlook contacts. Contacts that are stored on your device, which can be created on your device or synchronised with your PC or the Exchange Server. • SIM contacts. Contacts that are stored on the SIM card. Only a name and phone number can be stored for each entry. • Windows Live™ contacts.
Programs 235 Add new contacts To add a contact on your device 1. Open the Contacts screen. 2. Tap New, select Outlook Contact, and enter the contact information. 3. In the File as field, choose how you want the contact name to appear in the contact list. 4. To add a photo of the contact, tap Select a picture, and then select the picture file or tap Camera to take a photo of the contact. 5.
Programs Organise and search contacts To group similar contacts For easier management, you can group similar contacts by assigning them to categories. 1. Create a new Outlook contact or edit an existing Outlook contact. 2. Tap Categories. 3. Select a preset category such as Business or Personal, or tap New to create your own category. 4. When finished, tap OK.
Programs 237 Share contact information To beam a contact’s details You can quickly send contact information to another mobile phone or device through Bluetooth beaming. 1. On the Contacts screen, select a contact. 2. Tap Menu > Send Contact > Beam, then select a device where to beam the contact to. Note Before beaming, make sure Bluetooth is turned on and set to visible mode on your device and the target mobile device. You can also beam contact information to your computer. See Chapter 9 for details.
Programs 12.6 Comm Manager Comm Manager is a central location where you can easily turn on and off the communication features of your device such as the phone, Wi-Fi, data connection, Bluetooth, and more. To access the Comm Manager Do one of the following: • On the TouchFLO 3D Home screen, slide to the Settings tab and then touch Communications. • Touch Start > Programs > Comm Manager. • Touch Start > Settings > Connections tab > Comm Manager. 1 Switch Airplane Mode on or off.
Programs 239 12.7 JETCET™ PRINT JETCET PRINT lets you print image files or documents from your device straight to a Bluetooth, network, or PictBridge printer. You can also print emails, email attachments, web pages, appointments, contacts, and tasks. Tip For more information about JETCET PRINT, consult the JETCET PRINT help in your device by tapping Menu > Help > Contents in the JETCET PRINT screen. Open JETCET PRINT Tap Start > Programs > JETCET PRINT. Tap to select an image to print.
Programs 2. If you are not in the Settings tab, tap the settings button ( • Tap Add Network Printer to set up and connect to a shared network printer. Note Note ), then: The device will wait continuously if you have entered an incorrect IP address while setting up a network printer. • Tap Add Bluetooth Printer to set up and connect to a Bluetooth printer. • Tap Add PictBridge Printer to set up and connect to a PictBridge printer.
Programs 241 12.8 Microsoft® Office Mobile Microsoft® Office Mobile consists of the following applications: • Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks and templates on your device. • Microsoft® Office OneNote® Mobile lets you create notes with text, photos, and voice recordings for synchronisation later with Microsoft® Office OneNote® 2007 on your computer. • Microsoft® Office PowerPoint® Mobile allows you to view (not create) slide show presentations in *.ppt and *.
Programs Tips • By default, Word Mobile saves documents in .docx format, while Excel Mobile saves workbooks in .xlsx format. If you want to open these types of files on a computer that uses Microsoft Office 2000, Office XP, or Office 2003, you need to download and install the File Format Converter in your computer. You can find this converter at http://www.microsoft.com/downloads/details. aspx?FamilyId=941B3470-3AE9-4AEE-8F43-C6BB74CD1466&displaylang=en.
Programs 243 To draw in a note 1. Create or open a note file. 2. Use the stylus to draw on the screen. A selection box then appears around your drawing. 3. Tap OK to save. Note To select a drawing (for example, to copy or delete it), tap and hold the drawing briefly. When you lift the stylus, the drawing is selected. To record a voice note You can create a stand-alone recording (voice note) or you can add a recording to a note. 1. Tap Start > Programs > Notes. 2.
Programs 12.10 Java MIDlets are Java applications such as games and tools that can run on mobile devices, while a MIDlet suite is a collection of one or more MIDlets. The Java program lets you download, install and manage MIDlets or MIDlet suites on your device. Your device supports Java 2 Micro Edition, J2ME. To open the Java program Tap Start > Programs > Java. Install and launch MIDlets/MIDlet suites There are several ways to install a MIDlet/MIDlet suite.
Programs 245 To run a MIDlet/MIDlet suite Do one of the following: • After installation of the MIDlet/MIDlet suite is complete, tap Yes. • On the Java screen, open the folder that contains the MIDlet/MIDlet suite. Select the MIDlet/MIDlet suite, then tap Launch. Manage MIDlets/MIDlet suites You can organise MIDlets/MIDlet suites into folders for easy identification, renaming, updating, and more. If the device memory is full, uninstall some MIDlets/ MIDlet suites to free up memory space.
Programs 12.11 SIM Manager SIM Manager allows you to view the contents of your SIM card, transfer contacts from your SIM card to your device or vice versa, and make a call to a SIM contact. To create a contact on your SIM card 1. Tap Start > Programs > SIM Manager. 2. Tap New and enter a contact name and phone number. 3. Tap Save to save the information on your SIM card. Tip To change contact information on your SIM card, tap a SIM contact, edit the information, and then tap Save.
Programs 247 2. Select the check boxes of the types of phone numbers that you want to be added to the SIM card. 3. Under the Mark column, you can change the indicator that will be appended to the SIM contact names for each phone number type. To do so, select a phone type, tap Edit, enter your desired indicator, then tap Save. 4. After modifying, tap OK. 5. Tap Menu > Contacts to SIM. 6. Select the check boxes of the contact’s phone numbers that you want to copy to your SIM card, then tap Save.
Programs 12.12 Sprite Backup Use Sprite Backup to back up data, which includes settings, files, contacts, and all other information, to the device memory, storage card or a computer. Note If you are sending your device for repair or performing a hard reset, data from your device will be lost. It is recommended that you use Sprite Backup to back up your files including settings, contacts and other information to your computer or a storage card. To install Sprite Backup 1.
Programs 249 Use the check boxes to select or exclude items for backup. Main screen Notes Backup Data Selection screen It is recommended that you do not back up the File System of your device as this may cause restoration problems. To not back up the File System, expand the System Data folder by tapping “+” on its left side and then clearing the File System checkbox.
Programs To restore data 1. On the Sprite Backup main screen, tap Restore. Sprite Backup then searches for all available backup files from the device memory and storage card and then displays them on the Open File screen. Tip To search for backup files created on your computer, connect your device to your computer and run Sprite Backup PC Manager on your computer. In Sprite Backup’s Open File screen on your device, set Location to PC. 2. Select the backup file you want to restore and then tap Next. 3.
Programs 251 12.13 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). Your tasks are displayed in a task list. Overdue tasks are displayed in red. A reminder will be displayed when you have new tasks to be completed. To create a task 1. Tap Start > Programs > Tasks. 2. Tap Menu > New Task, enter a subject for the task, and fill in information such as start and due dates, priority, and so on. 3.
Programs To send task information as a vCalendar After selecting the task to send in the Task screen, tap Menu > Send as vCalendar to send a vCalendar containing task details as a file attachment in an MMS message. For more information, see “MMS” in Chapter 6. 12.14 Voice Recorder Voice Recorder lets you record your voice and quickly send it as an MMS or email attachment, beam it via Bluetooth, or set the recorded voice as your ring tone.
Programs 253 Tip If you need to adjust the sound volume, touch any of the status icons on the title bar and then touch the Volume icon ( ) to open the System Volume screen where you can adjust the volume. To send a voice recording through MMS Select a voice recording, then tap Menu > Send via MMS. A new MMS message is then created with the voice recording automatically inserted as an audio clip. See “MMS” in Chapter 6 to learn how to compose and send MMS messages.
Programs 12.15 Voice Speed Dial You can record voice tags so that you can dial a phone number or launch programs simply by speaking a word. To create a voice tag for a phone number 1. On the TouchFLO 3D Home screen, slide to the People tab and then touch All People to open the Contacts screen. Tip You can also touch Start > Contacts to open the Contacts screen. 2. Do one of the following: • • Scroll to the desired contact, then touch Menu > Add Voice Tag.
Programs 255 To create a voice tag for a program Touch Start > Settings > Personal tab > Voice Speed Dial > Application tab. The Application tab displays a list of all installed programs on your device. The procedure for creating a voice tag for a program is the same as the procedure for creating a voice tag for a phone number. To make a call or launch programs using a voice tag 1. Touch Start > Programs > Voice Speed Dial. 2.
Programs 12.16 WorldCard Mobile WorldCard Mobile lets you take a photo of a business card and easily export the contact information on the card into your Contacts. To open WorldCard Mobile Tap Start > Programs > WorldCard Mobile. Note If you do not find WorldCard Mobile in the Programs screen, you need to install it from the Application disc. Tap to view the WorldCard Mobile copyright information. Tap to open the WorldCard Mobile help.
Programs 257 Tip Make sure that the business card is displayed completely in the Camera screen before you take the photo, and that lighting is adequate. 3. On the WorldCard Mobile screen, tap Recognize. Tips • If you want to retake the shot, tap Re-Capture. • For better recognition, choose the Language and Region based on the language used in the business card. 4. The screen shows various contact information from the business card. Use the on-screen keyboard to edit the contact information, if needed.
Programs 5. Tap Export, then go to your Contacts list to view the exported contact. For more information about using WorldCard Mobile, see Help on your device. 12.17 ZIP The ZIP program increases the storage capacity of your device by allowing you to compress files in the conventional ZIP format. It also allows you to extract files from a zip file. To start ZIP on your device Tap Start > Programs > ZIP. Each time you start ZIP, it searches for files that have the .
Programs 259 2. From the zip file, select files by doing one of the following: • • • Touch a file to select it. To select several files, touch Menu > Action and make sure Multi-Select Mode is selected. Select files by touching each file. (Touch a selected file to deselect it). To select all files, touch Menu > Action > Select All. 3. Touch Menu > Action > Extract. 4. Choose a folder where the files will be extracted to, then touch Extract. 5. Touch Menu > File > Close Archive to close the zip file.
Programs 12.18 Spb GPRS Monitor Using Spb GPRS Monitor, you can monitor how much data you have sent and received on your device, and check the network usage costs by taking into account your service plan details. You can also view connection cost and traffic charts, generate reports of network connection usage, and export reports to CSV files for use with Microsoft® Office Excel® and Access. Install GPRS Monitor The GPRS Monitor program is included in the Applications disc.
Programs 261 When you tap the GPRS Monitor icon on the title bar, a pop-up window opens and shows you detailed statistics about your data transfers, such as the data size you have just transferred and its cost, the allowable amount of data that you can transfer, and more. Set up monitoring and notification To select the connection to be monitored 1. On the GPRS Monitor screen, tap Tools > Options > Connection tab. 2. Select the Enable connection monitoring check box. 3.
Programs 2. Enable the notifications on the Day Warn and Month Warn tabs. You can specify up to three daily and three monthly limits. Once traffic reaches one of these limits, you will receive a notification. View charts and reports On the GPRS Monitor, you can view network connection cost charts and traffic charts, as well as generate detailed reports of network connection usage during a given period of time.
Chapter 13 Managing Your Device 13.1 Copying and Managing Files 13.2 Settings on your Device 13.3 Changing Basic Settings 13.4 Using Task Manager 13.5 Connecting to an External Display 13.6 Protecting Your Device 13.7 Managing Memory 13.8 Resetting Your Device 13.9 Windows Update 13.
Managing Your Device 13.1 Copying and Managing Files You can copy files between your device and computer, or copy files to a storage card installed on your device. You can also efficiently manage your files and folders using File Explorer. To copy files using Windows Mobile Device Center or ActiveSync 1. Connect your device to the computer. 2. Click File Management > Browse the contents of your device in Windows Mobile Device Center on your computer, or click Explore in ActiveSync on your computer.
Managing Your Device 265 4. To quickly delete, rename, or copy a file, tap and hold the file, then choose the desired operation on the shortcut menu. To copy or delete multiple files, tap and drag over the desired files to select, tap and hold the selection, then choose the desired operation on the shortcut menu. To copy files to a storage card 1. Make sure that the storage card is properly installed on your device. 2. Tap Start > Programs > File Explorer and navigate to the appropriate folder. 3.
Managing Your Device 13.2 Settings on your Device You can adjust the device settings to suit the way you work. To see all available settings, slide to the Settings tab on the Home screen and tap All Settings. Personal tab Icon Description Buttons Assign a program or function to a hardware button. Input Set options for each of the input methods. Keyboard Sliding Sound Select a sound to play when you open and close the hardware keyboard. Lock Set a password for your device.
Managing Your Device 267 System tab Icon Description About This is where you can see basic information such as the Windows Mobile® version and type of processor used on your device. You can also specify a name for your device. Certificates See information about certificates that are installed on your device. Clear Storage Reset your device to factory default settings. Clock & Alarms Set the device clock to the date and time of your locale or to a visiting time zone when you’re traveling.
Managing Your Device Icon Description Long Press End Key Choose the desired function to be executed (for instance, lock the device) when pressing and holding the END key. Managed Programs Displays the programs that were installed on your device using System Center Mobile Device Manager. Memory Check the device memory allocation status and storage card information. Microphone AGC Adjust the volume of your voice automatically when you are recording. Power Check the remaining battery power.
Managing Your Device 269 Connections tab Icon Description Advanced Network Turn on/off HSPA, set the line type to use when making circuit switch data (CSD) connection, set the GPRS authentication method, and set the SMS service preference. HSPA is a digital data service that provides high-speed downstream data rates.
Managing Your Device 13.3 Changing Basic Settings Date and time To set the date and time 1. On the Home screen Home tab, tap the time display and then tap the Time tab. Tip Tap the More tab and select the Display the clock on the title bar in all programs option to show the clock on all screens. 2. Select the correct time zone and change the date or time. Note During synchronisation, the time on your device is updated with the time on your computer.
Managing Your Device 271 Display settings To adjust the screen brightness 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Power > Backlight tab. 3. Adjust the brightness by dragging the slider under On battery power and On external power. Tip Select Auto adjust backlight to automatically adjust the backlight brightness according to the ambient lighting. To set the backlight to dim after a time delay 1.
Managing Your Device To change the device name 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap About > Device ID tab. 3. Enter the device name. Notes • The device name must begin with a letter, consist of letters from A to Z, numbers from 0 to 9, and cannot contain spaces. Use the underscore character to separate words.
Managing Your Device 273 Alarms and notifications To set an alarm 1. On the Home screen Home tab, tap the time display and then tap the Alarms tab. 2. Tap and enter a name for the alarm. 3. Tap the day of the week for the alarm. Select multiple days by tapping each desired day. Tap again to deselect the day. 4. Tap the time to open a clock and set the time for the alarm. Tip You can drag the hour and minute hands of the clock to set the time. 5.
Managing Your Device Phone services Your device can directly link to the mobile phone network, and enable you to access and change the settings of various phone services for your device. Phone services may include Call Forwarding, Call Waiting, Voicemail, and more. Contact your wireless service provider to find out about the availability of phone services for your device. To access and change settings of phone services 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2.
Managing Your Device 275 To configure the Exit ( ) button You can configure the Exit button to shut down running programs when the button is tapped, or to just temporarily close the program screen but keep the program running. 1. On the Task Manager screen, tap the Button tab. 2. Select the Enable the “X” button to end running programs check box. Note When the Enable the “X” button to end running programs check box is not selected, tapping the Exit button will only close a program screen.
Managing Your Device To add a running program to the exclusive list If you add a running program to the Exclusive Programs List, it will not be closed when you tap Stop Selected or Stop All and will not be listed in the Quick Menu on the Home Screen. 1. On the Task Manager screen, tap the Running tab. 2. Tap and hold the program name, then tap Add Exclusive. Tip To remove a program from the exclusive list, tap the Exclusive tab, select the check box of the program, then tap Remove.
Managing Your Device 277 Connect the device to an external display 1. Turn off the external display. 2. Connect the ends (red, white, and yellow RCA plugs) of the HTC TV Out cable to the external display’s RCA sockets. 3. Connect the mini-USB end of the HTC TV Out cable to the sync connector at the bottom of the device. The TV Out screen opens. Note The display automatically changes to landscape mode after connecting the HTC TV Out cable. 4.
Managing Your Device 13.6 Protecting Your Device Protect your SIM card with a PIN You can protect your SIM card from unauthorised use by assigning a PIN (personal identification number). The default SIM card PIN is provided by your wireless service provider. To enable the SIM card PIN 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the Personal tab, tap Phone > PIN/PIN2 tab. 3. Select the Require PIN when phone is used check box. 4.
Managing Your Device 279 Notes • To ensure that you can always make emergency calls, do not begin your password with the digits of your local emergency number. • If you entered a hint, the hint will be displayed after the wrong password is entered five times. • Each time a wrong password is entered, the device response time gets longer until the device appears to be not responding. • If you forget your password, you can hard reset or clear the device memory.
Managing Your Device 13.7 Managing Memory To see how much memory is available for use 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Memory > Main tab. The amount of memory allocated to data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory. To see the available space of the storage card 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2.
Managing Your Device 281 13.8 Resetting Your Device Soft reset Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. To perform a soft reset 1.
Managing Your Device Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card. To perform a hard reset 1.
Managing Your Device 283 13.9 Windows Update You can update Windows Mobile® on your device with the latest updates, security patches or fixes, if these are available. To set up Windows Update The first time you run Windows Update, you need to set up how you want Windows Update to check for patches on the Microsoft web site. 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Windows Update. 3. On the Update Setup screen, tap Next. 4.
Managing Your Device To change Windows Update options 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Windows Update. 3. Tap Menu and select the option you want to change. • Tap Connections to change how the device connects to the Internet when checking for updates. • Tap Change Schedule to change how Windows Update checks for Windows Mobile® updates.
Managing Your Device 285 13.10 Battery Saving Tips How long your battery power lasts depends on the battery type and how you use your device. Try the following to help conserve battery life: • When the device is not in use, press POWER to switch off the display. • On the Home screen, slide to the Settings tab and then tap All Settings. On the System tab, tap Power > Advanced tab of the Power settings screen.
Managing Your Device
Appendix A.1 Specifications A.
Appendix A.1 Specifications System Information Processor Qualcomm® MSM7201A™ 528 MHz Memory • ROM : 512 MB • RAM : 288 MB DDR Note: Figures are the total ROM and RAM memory available for use and storage. Since the memory is shared by the operating system, applications, and data, the actual available memory is less than what is specified. Operating System Windows Mobile® 6.
Appendix 289 Physical Dimensions 102 mm (L) X 51 mm (W) X 18.05 mm (T) Weight 165 g (with battery) Display LCD Type 2.8-inch TFT-LCD flat touch-sensitive screen Resolution 480 x 640 VGA resolution Camera Module Type Main camera: 3.
Appendix Audio Microphone/ Speaker Built-in Ring tone • Supports MP3, AAC, AAC+, WMA, WAV, AMR-NB formats • 40 polyphonic and standard MIDI format 0 and 1 (SMF) / SP MIDI Supported Playback Formats • Windows Media® Player: MP3, MPEG-4, AAC, AAC+, eAAC+, WMA, WAV, AMR, AMR‑NB, AMR-WB, AWB, SP-MIDI • TouchFLO™ 3D: AMR-NB/WB, MP3, MPEG-4, WMA, AAC, AAC+, eAAC+ Controls Device Control • • • • • • • • Hardware Keyboard 5-row QWERTY keyboard TouchFLO™ 3D Touch-sensitive navigation control with ENTER
Appendix 291 A.2 Regulatory Notices Regulatory Agency Identifications For regulatory identification purposes, your product is assigned a model number of RAPH120. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your RAPH120. The Battery Pack has been assigned a model number of DIAM171. Note This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.
Appendix • EN 301 489-24 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA direct spread (UTRA) for mobile and portable (UE) radio and ancillary equipment. • ETSI EN 301 511 Global system for mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands, covering essential requirements of article 3.
Appendix 293 • • EN 50360 / 50361 Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz ~ 3 GHz). EN 50392 Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz) - General public.
Appendix Safety Precautions for RF Exposure Use only original manufacturer-approved accessories, or accessories that do not contain any metal. Use of non-original manufacturer-approved accessories may violate your local RF exposure guidelines and should be avoided. Exposure to Radio Frequency (RF) Signals Your device contains a radio transmitter and receiver. The radiated output power is far below the international radio frequency exposure limits.
Appendix 295 causing loss of performance and SAR levels exceeding the recommended limits as well as result in non-compliance with local regulatory requirements in your country. To assure optimal phone performance and ensure human exposure to RF energy is within the guidelines set forth in the relevant standards; always use your device only in its normal-use position. Do not touch or hold the antenna area unnecessarily when placing or receiving a phone call.
Appendix Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Appendix 297 The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources.
Appendix
Index Symbols 3G 150 A A2DP 180 ActiveSync - about 225 - set up 104 - synchronise with computer 105 - synchronise with Exchange Server 134 Add and remove programs 228 Adobe Reader LE 225, 229 Airplane Mode 57, 238 Alarm 273 Album - about 204, 225 - close Album 209 - play back video 209 - select a photo or video to view 204 - view an image 205 Attachment - add to email 127 - download 129 - set IMAP4 to automatically receive attachments 131 - set Outlook to automatically receive attachments 131 Audio Booste
Index - turn on and off 238 - visible 178 Bluetooth Explorer 225 C Calculator 225 Calendar - about 224 - create appointment 230 - send appointment 233 - view appointment 232 Call History 56 Calling - from Contacts 51 - from Home screen 52 - from Phone screen 51 Camera - about 192, 225 - Advanced Options 200 - capture modes 192 - controls 194 - file formats 193 - icons 194 - Menu Panel 196 - specifications 289 - zooming 197 Car kit phones 64 Clear Storage 282 Clock & Alarms 267, 270, 273 Comm Manager 2
Index 301 Email - Internet email account (POP3/IMAP4) 122 - mail server settings 123 - Mail tab (Home screen) 73 - send 127 - settings (POP3/IMAP4) 124 - setup wizard 122 - synchronise 100, 130, 134 - types of email accounts 120 Emergency call 52 Emoticon - MMS 118 - Windows Live Messenger 167 Entering Information 88 - On-screen 88 - QWERTY keyboard 88 Equalizer 220 Excel Mobile 224, 241 Exchange Server 134 F Favourite contacts 70 File Explorer 225, 264 Find contact - Company Directory 142 - on device 236
Index J Java - about 226 - create folders 245 - install MIDlets/MIDlet suites from device 244 - install MIDlets/MIDlet suites from Internet 244 - manage MIDlets/MIDlet suites 245 - uninstall MIDlets 245 - update a MIDlet/MIDlet suite 245 JETCET PRINT 226, 239 L Letter Recognizer 97 Library - Music tab (Home screen) 77 - Windows Media Player Mobile 211 Live Messenger 166 M Mail tab (Home screen) 73 Meeting request 140, 233 Memory 44, 280, 288 Messages tab (Home screen) 72 Messaging - about 110, 22
Index 303 Open PDF file 229 Opera Mobile 152, 226 P Panorama capture mode 193 Password 278 People tab (Home screen) 70 Phone 50, 224 Phone Keypad 93 Phone services 274 Photo capture mode 193 Photos and Videos tab (Home screen) 79 Pictures & Videos 226 Picture Theme capture mode 193 PIN 50, 278 Playlists - Music tab (Home screen) 77 - Windows Media Player Mobile 215 Play media 214 Play music - Music tab (Home screen) 75 - Windows Media Player Mobile 214 Podcasts 176 POP3 122 PowerPoint Mobile 224, 241 Pro
Index - Advanced Network 269 - Beam 269 - Bluetooth 269 - Connections 150, 151, 269 - Domain Enroll 269 - USB to PC 107, 269 - Wi-Fi 149, 269 - Wireless LAN 148, 269 Settings (Personal tab) - Buttons 266 - Input 266 - Keyboard Sliding Sound 266 - Lock 266, 278 - Menus 266 - Owner Information 266 - Phone 266, 272, 274 - Sounds & Notifications 266, 273 - Today 266 - Voice Speed Dial 255, 266 Settings (System tab) - About 267, 272 - Certificates 267 - Clear Storage 267, 282 - Clock & Alarms 267, 270, 273 -
Index 305 - encrypt 279 - install 31 Streaming Media 161, 227 Swap/switch calls 54 Synchronise - ActiveSync 105 - change information types 106 - music and videos 108 - via Bluetooth 107 - Windows Media Player 212 - Windows Mobile Device Center 101 - with computer 82, 105 - with Exchange Server 82, 134 T T9 94 Task Manager 268, 274 Tasks 227, 251 Text messages - copy from SIM card 114 - copy to SIM card 113 - create new message 111 - Messages tab (Home screen) 72 - send 112 Text size (screen) 271 TouchFLO
Index W Weather tab (Home screen) 80 Wi-Fi 146, 238 Windows Live 163, 227 Windows Live Messenger 166, 226 Windows Media Player Mobile - about 227 - file formats 210 - menus 211 - playlists 215 - troubleshoot 215 Windows Mobile Device Center 101 Windows Update 268, 283 Word Mobile 224, 241 WorldCard Mobile 227, 256 Y YouTube 156, 227 Z ZIP - about 227, 258 - create archive 259 - open zip file and extract files 258 Zooming - Camera 197 - finger gestures 85
